rinstips 
Nowadays, there are so many products of 200mm heating bed in the market and you are wondering to choose a best one. You have searched for 200mm heating bed in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 200mm heating bed which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Geeetech 3D Printer MK2 Heating Bed Tempered Borosilicate Glass Plate Suitable for Reprap Prusa i3 DIY Machine Heating Circuit Board,2102003mm (1 Pcs)
Signswise 200x200mm 12V 220W Silicone Rubber Heating Heater for 3D Printer Heated Beds
Signswise 200x200mm 12v 150w Silicone Rubber Heating Heater for 3d Printer Heated Beds
FYSETC 3D Printer Heated Bed Silicone Heat Pad, 200 X 200mm/ 7.8" x 7.8" Silicone Heater Mat, 220V 600W Bed Plat Pad with 3M Adhesive Rubber Heating Sheet for Reprap Prusa i3 Anet A8 Maker V2 Hot Bed
- Excellent 3D Printer Heatbed parts: decrease the hot bed heat up time, faster and better heating, Versatile, the silicone rubber platform also can prevent condensation in motors or instrument cabinets
- Size: 200mm x 200mm ( approx. 7.8″ x 7.8″), Thickness: about 2.8mm
- Power: 600W, 220V
- Thermistor: 100K “3950”, comes with the high temperature fuse, will protect the heated bed when it is too high.
- Easy to mount: comes with high temperature 3M tape, for attaching to heated bed
- After-sales Support: each one defective item can have the free replace or refund, If need further please fell free to email or QA us, we and our engineers are here for waiting you all the time.
Main Feature:
● Applications for 3D Printer Heated Bed, food service equipment, airplane engine heaters, aerospace industry, drums and other
● Durable silicone rubber hot bed, best heater performance and the longest serving life, uniform heat transfer;
● Work well in especially at high temperatures or in long time heating process.
● Moisture proof and chemical resistance
Material: Arlon Silicone Rubber substrate, imported from the United States;
Power: 600W, 220V.
Suggest working temperature: -62～200℃
Please Note:
Please heat only when after it’s mounted onto the build plate (Aluminum plate recommended).
Package includes:
1 x 7.8 inch Silicone Rubber Heater
TongLingUSL 200W 200x200mm 120v/220v Silicone Heated Bed Heating Pad with Hole for 3D Printer
- SIMPLE INSTALLATION 100% brand new and high quality. Simple,smart and high-precision
- – Adhesive backing offers excellent and easy mounting onto most surfaces.
- – Adhesive backing offers excellent and easy mounting.
- – This pad heats up quickly. Please handle with care.
- – Wonderful silicone heater for your 3D printer heat-bed.
The corporate philosophy of "TongLingUSL" is "to make better products." Our factory is an ISO-qualified factory, so the quality control is very strict, because it is factory direct sales, so the price is not high, it can be distinguished from other products.
Specifications:
Main Color: Orange
Material: Silicone Rubber (with adhesive backing)
Size: 200mm x 200mm
White Line Length: About 50cm
Red Line Length: About 93cm
Voltage: 120v/220v
Power: 200W
Continue to use working temperature should be less than 240 ℃ Instantaneous does not exceed 300 ℃
Package Included:
1x 200*200mm Heated Bed Heating Pad
Industrial & Scientific / Additive Manufacturing Products / 3D Printer Parts & Accessories / 3D Printer Accessories
Notice: Actual color may be slightly different from the image due to different monitor and light effect
3D Printer Silicone Heated Pad, Heating Plate 310x310mmx1.5mm, 120V 750W for Creality CR-10 /CR-10S 3D Printers Heater Bed with Screw Holes /3M Adhesive
- Wonderful silicone heater for Creality CR-10 /CR-10S 3D printer build plate heating.
- Rated at 5 watts per square inch with fast and even heating
- Equipped with NTC 100K thermistor (Beta 25/50 3950K-1%) as temperature control sensor which is supported directly by Marlin firmware.
- 3M adhesive backing offers excellent and easy mounting onto most surfaces.
- Versatile and may be used in many other applications.
Wisamic Borosilicate Glass Plate Bed 200x200x3mm for 3D Printers Prusa, Monoprice Maker Select V2, Monoprice Maker Select Plus, etc
- 100% borosilicate glass. Borasolicate glass is rated for higher temperatures than normal sheet glass. Flat, heat resistant plate. Does not warp during long term use.
- Conducts heat evenly across the build surface to ensure consistent temperature throughout the build surface.
- High binding power when heating. Easy to separate the plastic parts when cooling.
- Get you out of the trouble when plastic film decreased viscosity after a period of usage.
- Specially designed to fit the 3D Printers Prusa, Monoprice Maker Select V2, Monoprice Maker Select Plus, etc
If you want to make your printing platform flat enough, ideal stuff is glass sheet. Borosilicate glass is rated for higher temperatures than normal sheet glass making it a better material for use as a heated bed. After cracking a few sheets of normal glass from rapidly cooling or heating, borosilicate glass will quell your frustrations.
Features:
* Borosilicate is a very high temperature glass. It has a melt temperature of about 800° C and a very low thermal expansion coefficient.
* Resistant to thermal shock compared to regular glass.
* Prepare a second plate and quickly switchplates when a model finishes printing. This significantly reduces printer idle time between prints.
* Reduces warping, however platform has to be properly leveled as is the case with any platform on a 3D printer.
Specification:
Material: 100% Borosilicate
Size: 200x200x3mm
Thickness: 3mm
Package content:
1 x 200x200x3x3mm Borosilicate Glass
OVERTURE 3D Build Surface 200mm x 200mm (7.88’’ x 7.88’’) Upgraded 3D Printer Build Plate Sheet Heat Bed Platform Sticker with Laminated Transfer Adhesive, 10mm Grid, Black (5 Packs)
- 【Upgraded 3D Build Surface】 — We upgrade the 3M 300LSE Adhesive with new laminated adhesive transfer tape, which guarantees excellent adhesion, but at the same time, enable you to remove it easily from the heated bed when need replacing, easy to install and use
- 【Good Flatness and Bubble Free】– this Ultrabase is glass-based, bubble-free when being installed, which provides fast and uniform heating. Both the laminated adhesive and the platform sheet are heat resistant, which not only provides a strong bond, but also are not like to warp when being heated, contributing to a stable and consistent performance in guarantee beautiful prints
- 【Durable and Reusable】– scratch resistant , special Inorganic finishing with hardness of 8 Mohs, not easy to break or wear out
- easy to clean, It is acceptable to touch acids and alcohols, you can wipe down with isopropyl alcohol between prints for best results, so that you can reuse it for multiple prints.
- 【200*200 with 10mm Rigid】 — This Ultrabase is compatible with small size desk 3D FDM printer. Works with ABS, PLA, PETG, PETT, PVA, HIPS, ASA, Flexibles, Nylon and more. Easy to remove the prints by hand or with the help of some tools such as peeler or scrapper. 10 mm rigid allows you to cut it into your desired size.
- 【Service and Guarantee】– Our Overture Build Platform surface is designed to achieve very good first layer adhesion and increase the chances of getting beautiful prints. In order to provide our customers with better shopping experience, we offer 90-day money back. Feel free to contact us and get full refund or new one if there is anything unsatisfying.
Some customers reflected that the Previous 3d printer build mat adhere too well to remove from the heated bed, so we upgraded our Overture Build Platform surface to this Easy-to-Remove version. This 3d printer build surface 200 x 200 features easy installation, excellent adhesion to the plate, and good performance in helping create strong adhesion for the first layer.
Tips:
HOW TO USE:
1. Just Tear off the laminated transfer tape on the back and stick it on heat bed.
2. We suggest clamping the build surface to the print bed with binder clips（recommend 4 clips) after long term use in case of possible warping
HOW TO REMOVE:
Heat the bed to 50~60 Celcius, then use a putty knife or print removal tool gently work blade along edges, then you can easy to remove it. Finally washed with hot soapy water, or wipe with acetone after the bed cools back down. . Please be careful not to scald your hands.
Packaging List:
3D build surface x 5 packs
BCZAMD 200 X 200mm (Approx. 7.87" X 7.87") 120V 500W Silicone Rubber Heater Mat/Pad with NTC 100K Thermistor 3M Adhesive for 3D Printer Parts
- Size: 200X200mm/ 7.87 X 7.87 inch, Power: 120V 500W.
- Surface mount NTC 100K thermistor, the backing comes with 3M Adhesive.
- Improted Rubber Silicone, excellent heat source, evener heating across the whole surface.
- Suggest working temperature: -62～200℃ ( Note: the silicone mat’s temperature will heats up quickly, please take anti-scalding measures! ).
- After-sales guarantee: each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, we will try our best to service you.
We are professional 3D printer parts manufacturer, if you have any technical problem with our product, please feel free to contact us, our engineer of technical team will always support you here.
Feature:
– Wonderful silicone heater for your 3D printer heat-bed, also can use for food service equipment, airplane engine heaters, aerospace industry, drums and other cnc machine.
– Moisture proof and chemical resistance
– Durable silicone rubber hot bed, uniform heat transfer, works well in especially at high temperatures or in long time heating process.
Specification:
Material: Improted Rubber Silicone
Size: 200x200mm
Thickness: about 1-1.5mm
Rated Power: 500W
Thermistor: 100K “3950”
Tape: 3M
Working temperature: -62～235℃ (suggested )
Temperature: below 180℃
Package includes:
1 x 200 X 200mm (approx. 7.87″ X 7.87″) 120V 500W Silicone Rubber Heater
2 Pack Heated Bed Insulation Foam, MELIFE 200x200mm 3D Printer Heated Bed Insulation Foam Foil Self-Adhesive Insulation Mat Sticker Hotbed Thermal Pad for CR-10 Reprap Ultimaker Makerbot
- Suggestion Temperature: – 50℃ to 150℃ (-58℉~302℉).
- Advantage: soft, cold-resistant, heat-resistant, waterproof, low thermal conductivity, shock absorption, sound absorption, etc.
- Easy to use: This sheets can be easily cut down to desired size by scoring with a utility knife.
- Hight Quality: Self-adhesive insulation Foil is is directly pressed from aluminum, very high ignition point, Non-toxic and tasteless, high anti-blasting performance and strong puncture and tear resistance, good heat sealing performance.
- Compatiblity: 3D printer heating bed heat insulation and noise blocking accessories£¬apply to 3D printer heated bed, aluminum substrate, PCB hot bed, silicone hot bed bottom.
Parameter:
Size: 200mmx200mm(7.87×7.87in)
Colour: Silver surface & internal black
Thickness: 10mm
Weight: 152g
Advantage:
Soft, cold-resistant, heat-resistant, waterproof, low thermal conductivity, shock absorption, sound absorption, etc.
Installation Notices:
1. Please clean the surface you want to paste.
2. Make insulation materials and sheet metal firm fit, and play best adhesive, damping performance.
3. Do not cover the chassis wiring or air holes when you installation.
4. Appropriate use of adhesive tape will strengthen connections effect.
5. Paste Aluminum Soundproof/Damping Plate,you could heat with a hair dryer to make it soft, then compacted by hand. If the room temperature is below 5 degrees Celsius, first with sun lamp heating it until soft. Then remove the wax paper and paste it.
6. A successful installation process is best not to repeat tear paste, paste effect won’t be damaged.
7. The extra insulation can be pasted in some hidden place.
Packing list:
2pcs x Heated Bed Insulation Cotton
Conclusion
By our suggestions above, we hope that you can found 200mm heating bed for you.Please don’t forget to share your experience by comment in this post. Thank you!
