rinstips Nowadays, there are so many products of 3 inch brass check valve in the market and you are wondering to choose a best one.You have searched for 3 inch brass check valve in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 3 inch brass check valve which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
850 reviews analysed
Valterra 200-30 PVC Swing/Spring Combination Check Valve, White, 3" Slip
This Valterra 200-30 check valve is made of white schedule 40 PVC (polyvinyl chloride) for strength and resistance to corrosion and mild chemicals. Its EPDM (ethylene propylene diene monomer) seal resists degradation caused by water and oils, and the swing/spring construction of this valve makes it possible to install it in any position. It has a 2″ slip connection at each end, which must be fastened with glue, a maximum pressure rating of 150 pounds per square inch (psi), and a spring tension of 1/2 lb. This check valve is suitable for use with landscape and irrigation, pool and spa, aquaculture, and general purpose applications.
Check valves have two ports and restrict the flow of fluids and other loose materials through a pipe or passageway to one direction. Flow enters through one port and exits through the other, closing when flow reverses or stops. Two common types of check valves are ball cone valves and swing check valves. A ball cone valve utilizes a spring-loaded ball seated against a cone-shaped interior surface to stop the flow of fluid in a forward direction, and a swing check valve has a movable disc on a hinge to block reverse flow. Check valves are rated by their cracking pressure (the minimum upstream pressure required for the valve to operate), and they are used in various water, gas, air, and steam lines.
Valterra Products manufactures and distributes valves, hoses, sewer systems, and pool and spa products. The company, founded in 1981, is headquartered in Mission Hills, CA.
Valterra 200-07 PVC Swing/Spring Combination Check Valve, White, 3/4" Slip
This Valterra 200-07 check valve is made of white schedule 40 PVC (polyvinyl chloride) for strength and resistance to corrosion and mild chemicals. Its EPDM (ethylene propylene diene monomer) seal resists degradation caused by water and oils, and the swing/spring construction of this valve makes it possible to install it in any position. It has a 3/4″ slip connection at each end, which must be fastened with glue, a maximum pressure rating of 150 pounds per square inch (psi), and a spring tension of 1/2 lb. This check valve is suitable for use with landscape and irrigation, pool and spa, aquaculture, and general purpose applications.
Check valves have two ports and restrict the flow of fluids and other loose materials through a pipe or passageway to one direction. Flow enters through one port and exits through the other, closing when flow reverses or stops. Two common types of check valves are ball cone valves and swing check valves. A ball cone valve utilizes a spring-loaded ball seated against a cone-shaped interior surface to stop the flow of fluid in a forward direction, and a swing check valve has a movable disc on a hinge to block reverse flow. Check valves are rated by their cracking pressure (the minimum upstream pressure required for the valve to operate), and they are used in various water, gas, air, and steam lines.
Valterra Products manufactures and distributes valves, hoses, sewer systems, and pool and spa products. The company, founded in 1981, is headquartered in Mission Hills, CA.
Homewerks VCK-P40-B7B In-Line Check Valve, Female Thread x Female Thread, PVC Schedule 40, 1-1/2-Inch
From the Manufacturer
Homewerks VCK-P40-B7B In-Line Check Valve, Female Thread x Female Thread, PVC Schedule 40, 1-1/2-Inch.
Control Devices Brass In-Tank Check Valve, 3/4" Tube Comp. x NPT Male
- Price For: Each Application: For Industrial and Commercial Use Spring Material: Stainless Steel Max. Pressure (PSI): 450 Type: In Tank Outlet (In.): 3/4 (M)NPT Max. Temp. (F): 400 Material: Brass Length (In.): 3-1/2 Item: Check Valve Inlet (In.): 3/4 O.D. Thread Coating: 516 Dry Tape Thread Sealant Hex Size (In.): 1-1/8 Poppet: Flouropolymer
- Flow Range Free Air (CFM): 0 to 30 Country of Origin (subject to change): United States
The Super-Chek design has been proven over the last 15 years to be the standard for air compressor in-tank check valves. One-piece brass bodies, stainless steel springs, and glass-filled fluoropolymer poppets all add up to long term reliability, while the eight discharge holes insure quiet operation. Valves may be disassembled for cleaning or repair. Valves are 100% tested for backflow leakage performance. 450 PSI max pressure, 400 deg. F max temperature.
Campbell B00JFF205Y Check Valve Quiet CLR1.5 by Brady MfrPartNo 0823-15C, Black
‘Silent Check Valve, Material of Construction Clear PVC, Size 1-1/2 In., Connection Type Slip x Slip, Length 3-1/4 In., Width 3-1/4 In., Overall Height 9 In., Max. Water Pressure 150 psi @ 72 Degrees F, Cracking Pressure 300 psi, Max. Temp. 120 Degrees F, Mounting Position Any, Seat Material PVC, Spring Material 316 Stainless Steel, Seal Material Buna N, Flow 100 gpm’
Little Giant CV-10 Check Valve for VCC, VCM, VCMA and VCL-14/24, 1/4" MNPT x 3/8" ID vinyl tubing
- CHECK VALVE FOR WATERS: The Little Giant CV-114/112 check valve model number 599059 is full flow designed
- SUMP PUMP CHECK VALVE: The sump pump check valve fits both 1-1/4 inch and 1-1/2 inch pipe. Full flow design passes 1 inch solids
- EASY INSTALLATION: The easy slip fit design makes simple installation and it can be installed in vertical or horizontal line
- CHECK VALVE CONNECTION: The check valve has a slip x slip connection. This check valve is ABS construction
- DURABILITY: Durable flapper design checks back flow of water and sewer gases. Flexible union slip over ABS, PVC or copper pipe
Product Description
Specification:
Model Number: CV-10
Product Dimension: 6 x 4.5 x 0.5 inches
Item Weight: 0.64 ounces
The Little Giant CV-114/112 check valve model number 599059 is full flow designed. The sump pump check valve fits both 1-1/4 inch and 1-1/2 inch pipe. Full flow design passes 1 inch solids. The check valve has a slip x slip connection. This check valve is ABS construction. The sump pump check valve fits both 1-1/4 inch and 1-1/2 inch pipe. Full flow design passes 1 inch solids. Durable flapper design checks back flow of water and sewer gases. Flexible union slip over ABS, PVC or copper pipe. The easy slip fit design makes simple installation and it can be installed in vertical or horizontal line.
From the Manufacturer
This Little Giant check valve is used for VCC, CCM, VCMA, VCL-14/24 units. It fits 1/4-Inch MNPT to 3/8-Inch ID vinyl tubing.
Valterra 200-20W PVC Swing (No Spring) Check Valve, White, 2" Slip
- Schedule 40 PVC construction for strength and resistance to corrosion and mild chemicals
- EPDM seal for resistance to water and oils
- Maximum pressure rating of 150 psi
- Full flow construction for insignificant flow loss at swing check
- 2″ female slip connections
This Valterra 200-20W check valve is made of white schedule 40 PVC (polyvinyl chloride) for strength and resistance to corrosion and mild chemicals. Its EPDM (ethylene propylene diene monomer) seal resists degradation caused by water and oils, and its full flow construction allows for insignificant flow loss at the swing check, so no spring is needed. It has 2″ slip connections at both ends, which must be fastened with glue, and a maximum pressure rating of 150 pounds per square inch (psi). This check valve is suitable for use with landscape and irrigation, pool and spa, aquaculture, and general purpose applications.
Check valves have two ports and restrict the flow of fluids and other loose materials through a pipe or passageway to one direction. Flow enters through one port and exits through the other, closing when flow reverses or stops. Two common types of check valves are ball cone valves and swing check valves. A ball cone valve utilizes a spring-loaded ball seated against a cone-shaped interior surface to stop the flow of fluid in a forward direction, and a swing check valve has a movable disc on a hinge to block reverse flow. Check valves are rated by their cracking pressure (the minimum upstream pressure required for the valve to operate), and they are used in various water, gas, air, and steam lines.
Valterra Products manufactures and distributes valves, hoses, sewer systems, and pool and spa products. The company, founded in 1981, is headquartered in Mission Hills, CA.
GF Piping Systems PVC Y Check Valve, Wye, EPDM Seat, EPDM Seal, 3/4" Spigot
- Price For: Each Material of Construction: PVC Standards: ASTM Max. Temp.: 140 Degrees F Sub-Category: PVC Compliance: – Item: Y Check Valve Connection Type: Spigot Size: 3/4″ Length: 6-9/32″ Seal Material: EPDM Overall Height: 3-17/32″ Width: 2-1/8″ Seat Material: EPDM Country of Origin (subject to change): Switzerland
‘ Y Check Valve, Material of Construction PVC, Size 3/4 In., Connection Type Spigot, Length 6-9/32 In., Width 2-1/8 In., Overall Height 3-17/32 In., Max. Temp. 140 Degrees F, Seat Material EPDM, Seal Material EPDM, Standards ASTM, Compliance – ‘
Parker 003393002 339 Series Brass Check Valve, 3/8" NPT Female
339 Series check valves allow free flow in one direction and provide positive checked (zero flow) in the reverse direction. Brass / stainless steel / zinc-plated steel internal components, urethane seals. 143 scfm at 100 PSIG inlet pressure with full pressure drop.
Everflow Supplies 210C002-NL Sweat Brass Swing Check Valve 2 Inch – Lead Free
- Everflow part Number 210C002-NL
- Cast Brass swing check valve
- With solder cup connects for use with 3 inch diameter Copper pipes
- Maximum pressure of 200 psi wog and 125 psi swp
- Upc approved lead free product
- Approved By UPC, NSF
- Working Pressure 200 WOG, 125 SWP
- Brass Body Constructed
- No Lead design is suitable for all potable water supply installations.
- In-line back flow preventer.
Product Description
This is an Everflow Supplies swing check valve for establishing a one-way flow in supply lines, with a pressure of 200 psi wog and 125 psi swp. In particular, it has a lead free cast brass construction with an inlet and outlet with solder cups for use with 2 inch diameter copper pipes. Furthermore, upc approved the fitting for meeting the nsf 61-g lead free standards.
From the Manufacturer
Sweat Swing Check Valve 2 Inch – Lead Free, Approved By UPC, NSF, Working Pressure 200 WOG 125 SWP, Constructed With Brass Body
Conclusion
By our suggestions above, we hope that you can found 3 Inch Brass Check Valve for you.Please don’t forget to share your experience by comment in this post. Thank you!
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy 3 Inch Brass Check Valve, eg:
- What are Top 10 3 Inch Brass Check Valve for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 3 Inch Brass Check Valve to buy?
- What are Top Rated 3 Inch Brass Check Valve to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) 3 Inch Brass Check Valve?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for 3 Inch Brass Check Valve.
- Before deciding to buy any 3 Inch Brass Check Valve, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose 3 Inch Brass Check Valve and What you should consider when buying the 3 Inch Brass Check Valve and Where to Buy or Purchase the 3 Inch Brass Check Valve. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 3 Inch Brass Check Valve of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about 3 Inch Brass Check Valve.
