Which Is The Best Water Cooling Mix

XSPC fitting for water cooling systems with easy tool-free installation.

Model: TR-5060175581891-4P

EC6 Protect – Biocide is a highly effective slow release, long life biocide. Simply add to de-ionised water, purified water, or coolant for years of protection against bacterial growth and algae. EC6 Protect can be used in new system to protect against biological growth, or added to an existing system to neutralise bacteria an algae.

• Highly Effective Biocide
• Slow Release and Long Life
• Non-corrosive
• Low Odour
• Non-Foaming
• Low viscosity

Mix with water at a ratio of 6ml per litre. One bottle will treat 5 litres of water.

Do not mix in a higher than recommended ratio. EC6 Coolants already contain EC6 Protect Biocide.

Model: 5060175589613

Mayhems Dyes are the ideal choice for creating a unique colour within the customers Watercooled system. The aforementioned are also known for being the brightest dyes currently available on the market. In addition we also encourage the end-user to mix and match differing colours in order to achieve their own variation.

For use with any distilled, deionised or clear premix fluid, makes Mayhems Dye a very flexible product indeed.

Please note: Mayhems Dye does not contain any biocide so we recommend either a Silver Kill Coil, PT Nuke or similar product.

Instructions:
1. Clean water cooling loop before use
2. Fill water cooling loop with cooling fluid
3. Add the dye one drop at a time and let it circulate around the water cooling loop
4. Check the consistency and add more as necessary

Mixed With Other Colour Mayhem DyesAdd As Much Or As Little As You Require

Environmentally and Animal FriendlyNon-Toxic

Caution : Concentrate Dyes can stain skin as well as wood, metal, clothing, plastics etc.

Model: MDUVG15

Mayhems Pastel range of coolants have been in development for over two years, with co-operation between Ice Dragon Cooling and Mayhems. This new range of liquids surpasses anything in the market place at the moment in time, with its outstanding colours and cooling power.

Mayhems new pastel range incorporates many differing technologies into one product, from dyes to nano fluids and of course a little Mayhems magic. With a system working life of about two to three years, of which is due to a design that is intended for prolonged use.

Can be used with all of Mayhems Dyes to make your own colours.

• Blended with Non-Toxic Corrosion & Scale Inhibitors for protection of Copper, Brass, Steel, Nickel and Aluminium Proven to ASTM D3306 and BS6580 standards
• Very low oral toxicity, less than propylene glycol
• -8c freezing point
• Mobilises to prevent scale or sludge filming
• Boiling Point : up to 95° C (pressure dependent)
• Can be stored for up to three years, within in a cool dry environment

The system must be clean and have no chemicals of any kind left in the loop. There must be an absence of bleach, biocide and anti corrosive inhibitors. We recommend you flush your system with Mayhems Blitz Cleaning System before use.

Mayhems Pastel has biocides and inhibitors included within the mixture so do not add any extras except dye.

Warning: Contains Zinc Oxide. Do not dispose of down the drain. This is harmful to the environment. Please dispose of in safe appropriate manner. Store in a cool dry place out of reach of children and animals.

Disclaimer:- Not For Use with Aluminium Radiators Mayhems internal testing has seen severe issues with Aluminium Radiators and as a consequence we do not support the use of any Mayhems Pastel Coolants with these Radiators.

Does not contain ethylene glycol

Model: MPUVW250ML

Koolance 702 series coolant is used by many industries requiring a high performance, low-toxicity, reliable coolant with corrosion and biological inhibitors. A high quality coolant is extremely important for addressing dissimilar metals and biologic growth (bacterial and algae) long-term. Koolance liquids will not clog components and can typically be used for 2-3 years before replacement is recommended. (Coolant shelf life is 3 years.)

This container includes 700ml (24 fl oz) of prediluted coolant and can function as a squirt bottle for convenient reservoir filling. It’s recommended to replace the coolant at least every 2-3 years, or immediately if there is any change in color or clarity.

The freezing point is -15°C (5°F). This coolant has been tested with the following materials:

• Metals: copper, brass, aluminum, stainless steel, nickel, steel, gold, lead
• Plastics: ABS, PA66, PBT, PE, PEI, PES, PETG, PMMA, POM, PP, PPE, PPO, PPS, PTFE, PU, PVC
• Rubber: EPDM

NOTE: Not recommended for polycarbonate plastics or other PC-based plastics.

Additional Specifications

• Color: Yellow
• Volume: 700mL (23.67 fl oz)
• Freezing Point: -15°C (5ºF)
• Electrical Conductivity (µS/cm): 2500
• UV Reactive: Yellow
• Specific Gravity @20°C: 1.03
• Viscosity @20°C (cP): 2.3

As with all of PrimoChill’s high performance cooling system fluids and additives, Liquid Utopia is safe, non toxic, and biodegradable. Liquid Utopia is the only single use additive available in today’s market that provides a broad spectrum of coverage and has the ability to be dyed to your color choice by adding a PrimoChill Intensifier(sold separately). No matter which of the twelve colors you choose, PrimoChill’s Liquid Utopia makes life easy for you, and short for Algae and Corrosion.

********DO NOT MIX WITH THE PRE MIXED PC ICE OR PC PURE********
Warnings/Cautions: * Liquid Utopia is made with earth friendly ingredients and carries a broad spectrum of anti-microbial agents. If you notice white sediment in your loop, it is most likely Liquid Utopia has been hard at work! White sediment may be present for some time, depending on the amount of existing contaminants. Do not mix with any pre-mixed coolants as it will over saturate the inhibitors, this includes Silver Coils as they act as a antimicrobial component.
Tyler Direct is not responsible for any hardware damage. Use at your own risk.

This wash bottle is used to wash labware and to store washing solutions, such as acetone or deionized water. The LDPE (low-density polyethylene) body is lightweight, flexible, and elastic, has an opaque hue, and resists impact, stress cracks, and moisture absorption. Its Boston round shape is used for applications that require a rounded body, short neck, and narrow mouth to store liquid samples, solvents, and chemicals, and dry materials. The screw closure has its stem and draw tube molded in one piece for leak-proof applications, and its angled dispensing nozzle directs the stream of liquid. The spout can be cut back to increase the flow of washing solution. This bottle is suitable for storing and transporting labware washing solutions. Lab bottles are used to store, hold, and mix liquids, powders, and other substances in a wide variety of scientific industries. Lab bottles have a more pronounced neck and shoulder than jars. Lab bottles are manufactured with a combination of characteristics in order to meet the demands of particular applications, such as for solution dispensing, mixing, and weighing, and use in centrifuge operations. They come in many shapes for specific applications, with a variety of mouth or nozzle shapes and sizes for specific use. Lab bottles are made from materials, such as glass (borosilicate or soda-lime) and an array of plastics, which are selected for chemical and thermal expansion resistance, transparency, and their adaptability in a variety of applications. Lab bottle interiors, caps, and lids are often lined with a protective material. Caps and lids help seal bottles to prevent solutions from spilling. The capacity refers to the fluid amount held by a lab bottle, and is commonly measured in milliliters (mL) and liters (l), and sometimes in ounces (oz). Lab bottles are suitable for use in chemistry and biology applications, as well as in pharmaceutical and scientific testing.

XSPC Antimicrobial Silver Coils help to inhibit bacterial growth and algae when added to your watercooling loop. XSPC Silver Coil are made in the UK from 99.999% pure silver.

• Ribbon Dimensions: 75 x 3 x 0.5 mm
• Coiled Dimensions: 20 x 10mm
• Surface Area: 500mm square
• Weight: 1.3g
• Material: 0.999 Fine Silver

Model: 5060596650626

PC Opaque is a long-awaited  breakthrough in showcase coolant. The solid vibrant color will set the edge on your next build and provide stunning pictures of sheer beauty to be appreciated by all. Opaque is classified as a showcase style coolant but performance is comparable to any of its transparent counterparts.

Specifications

Parts Included

Known incompatible components include but NOT limited to:

This product is intended for Experienced/Professional Users Only.

PC Opaque is a long-awaited  breakthrough in showcase coolant. The solid vibrant color will set the edge on your next build and provide stunning pictures of sheer beauty to be appreciated by all. Opaque is classified as a showcase style coolant but performance is comparable to any of its transparent counterparts.

Specifications

Parts Included

Known incompatible components include but NOT limited to:

This product is intended for Experienced/Professional Users Only.

Conclusion

By our suggestions above, we hope that you can found water cooling mix for you.Please don’t forget to share your experience by comment in this post. Thank you!