The 10 Best Hot Water Tank 10 Gallon

Product Description

Stiebel Eltron SHC series mini-tank electric water heater is ideal for office buildings, stores, malls, warehouses, food trucks, restaurants, gas stations, schools, hotels/motels, commercial, industrial and institutional. residential: bathroom sinks, kitchen sinks, rvs, cabins/cottages, low flow showers and laundry areas. An SHC mini-tank frees up precious space while providing plenty of hot water for hand washing or kitchen applications. Plumbed with cold water and used as a stand-alone supply of hot water, or plumbed with hot water from a remote tank to minimize delays, an SHC always delivers hot water when needed. By put – ting hot water right where it is used, pipe runs are minimized and water and energy use reduced. The smaller tank coupled with superb insulation reduces stand-by losses especially when compared with larger tank-type water heaters. With its flat back and included bracket an SHC easily mounts right under or near the sink. Once filled with water it simply plugs into a 120 V outlet. With only an 11 amp current draw, no special wiring is required. Lightweight and compact, the SHC saves space, quickly provides hot water right where it is needed. Certified to ANSI/UL Std. 174 Conforms to CAN/CSA Std. 22.2 No. 110. Tested and certified by WQA against NSF/ANSI 372 for lead free compliance. ISO 9001 certified. Technical Specification: Phase – 60/50 Hz: single; Voltage: 120 V; Wattage: 1300 W; Amperage: 11.3 A; Nominal water volume: 2.65 gal / 10 l; Weight empty: 15.9 lb / 7.2 kg; Height (includes PandT valve): 18-11/16″ / 475 mm; Width: 11″ / 280 mm; Depth: 10-5/8″ / 270 mm; Maximum operating pressure: 150 psi / 10 bar; Maximum adjustable temperature: 140 degrees F / 60 degrees C; Recovery time: 18 minutes; Standby energy loss @ 131°F / 55°C: 0.37 kWh / day; Water connections: black steel -1/2″ NPT.

From the Manufacturer

The SHC Mini-tank frees up precious space while providing plenty of hot water for hand washing or kitchen type applications. Why store 30 or more gallons of hot water when 4 gallons or even 2.5 gallons are sufficient for the job? The unit installs right under or near the sink. Lightweight and compact, the SHC mounts to the wall (bracket included).

Atwood GC10A-4E GC10A4E DSI Gas Propane Electric 110V Combo 10 Gallon RV Trailer Water Heater 94022 94018 Camper Trailer RV10 Gallon CapacityIncludes durable powder coated access door and dual switchGas/110V Electric for flexibilityHas electric ignition for added convenience. A simple flip of a switch from inside allows you to turn on and off.They have aluminum clad tanks. This eliminates the need to have the aluminum anode for corrosion protection. 95% of the parts can be replaced or serviced through the outside door which simplifies service and eliminates the need for service personnel to enter the inside of your coach.The high temperature limit switch, temperature control and pressure relief helps protect your equipment and safety. Cut-out dimensions are: 16-1/4″W x 15-3/4″H x 20-5/8″ D Actual dimensions are: 16″W x 15.5″H x 20.8″ DWant more from your water heater? CLICK HERE for the XT Model which provides 50% more hot water with a pre-installed winterizing by-pass kit!Please Note: GC10A-4E is not the exact replacement for the GC10A-3E, and will require some rewiring, please consult a repair technician.THANKS FOR LOOKING!

All Suburban water heaters are designed for easy installation, operation and maintenance. The limit switch, reset button and on/off electric element rocker switch are conveniently located in a housing behind the removable outer door. The electric heat element and combination drain plug/anode rod are also located there. For convenience of installation, rough-in openings for Suburban water heaters are small and less likely to interfere with RV exterior design. Model: SW10DE Part #: 5096A LP Gas and Electric Electric Ignition 12,000 BTU Gas and 1440 Watt Electric Recovery Rate of 10.2 GPH and 6.2 GPH for Electric 45 lbs Empty Weight Cut Out Dimensions: 16 7/32″ Wide x 16 7/32″ High x 20 1/2″ Deep **Includes Polar White Door** 6259APW Flush Mount

This 10,000-12,000 BTU liquid propane hot water generator raises source water temperature up to 35 degrees f and is csa safety certified. This product is cordless, allowing you to enjoy a hot shower even in the most remote places. The external battery pack is powered by 4 d-cell batteries and will power through 6 five minute showers. A 1 lb. disposable cylinder connects directly to the included pre-calibrated regulator to deliver over 115 minutes of hot water on high. The included quick connect pump and shower head deliver an average of 6 gallons per minute, ensuring that your shower is as good when roughing it as it is at home. Integrated safety features, like the over temp cut-off, flow detector and tip switch protects you from scalding water and accidental burns.

Feature:
– No tank needed
– Instant water heating
– Overheat safety device
– Heat resistant metal body
– Low water pressure startup function
– 2 D batteries automatic IC ignition system
– Discharge Ways: Flue automatic gas discharge
– Easy installation (installation video can be sent if need)
– Comes with the shower head and pipe (Not included Exhaust Pipe)
– Perfect For House or apartment,Pool side hot shower rinse offs,Cabins,Campers,RVs,Concession & Catering Trailers,Mobile homes,Animal Washing,Boats and more.

Specification:
– Heat Load: 12KW
– Gross weight:5KG (11.0 lb)
– Rate Gas pressure:2800Pa (about 0.4 PSI)
– Applicable water pressure:0.015Mpa pressure starting
– (25 degrees) warm water producing rate:6L/min (6kg/min)
– Packing Size:335 x 170 x 520 mm (13.2 x 6.7x 20.5 inch)
– Cold water pipeline:Short pipeline equipped or G thread 1/2 steel tube
– Warm water pipeline:Long pipeline equipped or G thread 1/2 steel tube
– Gas pipeline (internal diameter):F 9.5mm(1/2 inch) oil-proof rubber tube ( not included)

Package Included:
– 1x Gas Water Heater (Not included exhaust pipe)
– 1x Shower Kit
– 1x English User Manual

Notice: Not included Exhaust Pipe
Pipe thread for gas and water valves are not American, you may need to buy some NPT adapters

NSF CERTIFIED MATERIAL & NSF LOGO Molded into tank All parts of tank made with NSF International NSF/ANSI Std 61 approved Medium Density Polyethylene (MDPE) Resin with UV-8 stabilization FRESH/DRINKING WATER SAFE Other tank brands without NSF logo will not pass a health inspection, tanks made without the correct materials may be hazardous to your health BPA FREE Class A Customs does not carry this chemical nor uses it in the manufacturing process FRESH or GRAY TANK use SEAMLESS One piece construction, no seams to burst RESISTANT Stain, Corrosion and Rust Resistant COLOR Creamy White you can see waterline through tank OEM PART No retail box – no install instruction Have a certified technician install all parts to prevent product damage and personal injury PREPARATION Sanitize each tank prior to use to remove any debris from the manufacturing process Tanks are made in a warehouse, wipe with a damp cloth to remove surface dust or scuffs TANK MUST BE VENTED allowing air in and out when in use DO NOT PRESSURIZE TANK DO NOT HOOK GARDEN HOSE DIRECTLY TO TANK DAMAGE WILL OCCUR DO NOT over-tighten fittings damage will occur MOUNTING & BRACING Place tank on level surface and brace to prevent tank from moving during transit DO NOT hang tank by straps DO NOT place weight on tank WARRANTY Cutting or modifying the tank in any way voids any/all warranty Using tank for any purpose other than fresh/gray water storage voids any/all warranty FOOD VENDORS You must verify requirements with health department where inspection will be made BEFORE PURCHASING Verify Requirements on Fresh Water Tank, Gray Water Tank, fittings, drainage, and mounting placement.

Product Description

Ideal for under-counter or crawl space installation. Inlet and outlet connections on side for easier installation in tight spaces. Glass-lined tanks with anode rod to protect against corrosion. Factory installed Temperature & Pressure Relief Valve. 6 year tank & parts limited warranty.

From the Manufacturer

Series 606 electrics provide up to 4,500 watts/hr. input — plenty for all your hot water needs.

The best water heaters on the road today, Suburban’s line of water heaters includes high recovery gas, gas-electric and motor aid models with sizes and features to match the requirements of almost any RV. Heated water attacks all metals, but not porcelain. That’s why Suburban uses a porcelain-lined, steel water heater tank with an a node rod to “absorb” the electrolytical action – just like your water heater at home. In fact, when a Suburban porcelain-lined tank is properly maintained, tank life may double or triple its three-year limited warranty, saving owners the cost of premature replacement. In addition, every Suburban tank is pressure tested twice during the manufacturing process to ensure its integrity. Fast recovery means more hot water and fewer cool water cycles. Six gallon Suburban gas water heaters feature 12,000 BTUH input and a recovery rate of 10.2 gallons per hour – that’s the fastest in the industry.

Camco 10 Gallon RV Hot Water Hybrid Heat easily converts any 10-gallon RV LP gas water heater to 120V electricity on demand, helping to conserve propane. Its stainless steel heating cartridge heats the water to temperatures ranging from 90° to 150° F. The kit includes ON/OFF power switch with mounting bracket and fully adjustable thermostat. All necessary power cords and color-coded wire assemblies are also included. 15 A/120 V electrical service is required for use. The thermostat is factory preset to 120° F.

Suburban’s magnesium anode rod is perfect for use in RV water heaters. The anode rod absorbs the corrosive effects of hot water to extend the life of your water heater’s tank. Remember to replace worn anodes to insure consistent protection. We recommend that you keep a spare on hand.

Conclusion

By our suggestions above, we hope that you can found hot water tank 10 gallon for you.Please don’t forget to share your experience by comment in this post. Thank you!