The 10 Best Aluminum Marine Fuel Water Separating Filter
Nowadays, there are so many products of aluminum marine fuel water separating filter in the market and you are wondering to choose a best one. You have searched for aluminum marine fuel water separating filter in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings aluminum marine fuel water separating filter which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
16,264 Reviews Scanned
Aluminum Marine Fuel Water Separating Filter 3/8 Inch NPT Port for Outboard Motor Mercury 35-60494-1 Reusable Bowl Anti Corrosion 10 Micron Filter(Include Four Fittings)
- Material:The filter is made of aluminum.Anti-oxidation/corrosion.Long service life.
- Features:10 micron filters are over 90% efficiency at removing particles as small as 10 microns.10 micron filters are recommended to protect sensitive inboard,sterndrive and outboard fuel injection systems.
- Usage:Designed to trap the smallest particles and emulsified water from diesel.
- Function:It contributes to clear contaminates protect fuel system.Well sealed.Perfect water fuel separating performance.
- Water separating canister:High performance 3/8 NPT ports offer lower pressure drop rates.
Replaces Mercury 35-60494-1.
Replaces Racor S3213, B32013,18-7932-1,18-7932,18-7928-1,18-7928.
Filter Replaces Mercury Marine 35-809097,Racor S3213,Yamaha MAR-24563-03-00,18-7919,18-7919-1.
To replace element:
1.Drain the unit by loosen the drain screw.
2.Loosen and remove the filter element.
3.Loosen and remove the bowl from filter element.Please note the bowl is reusable,do not dispose unless broken.
4.Wipe O-ring gland clean,and coat bowl’s seal O-ring with fresh oil or grease and place it back to the gland.Then tighten the bowl onto filter element firmly by tool.
5.Coat filter element’s seal O-ring with fresh oil or grease and attach filter element onto filter head,and the tighten securely by tool.
6.Run engine and check for fuel leakage.
Attention:
1.Make sure you remove both the filter and the filter bowl from the mounting housing and put a light film of fuel on the o-ring.As delivered it will leak without the lubrication to allow for the proper crush.
2.For diesel transfer tank to filter the fuel before it enters the main tank.Only thing is you have to make sure to get the proper sealant for the threads. For The First time installation,in order to avoid any leaking at the threads.You’d better get some thread paste since the tape might plug the injectors if it were to come loosen.
3.Check and replace regularly.
Instructions:
To Drain Water:
1.Loosen drain screw to drain bowl of water.
2.Tighten drain screw.
3.Run engine and check for fuel leakage.
Safety Warning:
Periodically check fittings and filter element for leaks.Be careful when changed fuel filter element.Diesel is extremely flammable and highly explosive under certain conditions.Avoid spilling diesel.Always stop engine and do not smoke or allow open flames in the area while changing filter element.
Similar items with 4 stars and above
Sierra 18-7982-1 Fuel Water Separator Kit
- Sierra fuel water separators remove over 99.8% of emulsified water from your gasoline
- Sierra’s 10 micron filters are over 90% efficient at removing particles as small as 10 micron
- All filters flow at 90 GPH to feed even the hungriest motor
- Prevent damage to sensitive inboard, sterndrive and outboard fuel injection systems
Sierra fuel water separators remove over 99.8% of emulsified water from your gasoline. Sierra’s 10 micron filters are over 90% efficient at removing particles as small as 10 microns. All filters flow @ 90 GPH to feed even the hungriest motor. Sierra 10 micron filters are recommended to prevent damage to sensitive inboard, sterndrive and outboard fuel injection systems.
iFJF R12T Fuel Filter/Water Separator 120AT NPT ZG1/4-19 Automotive Parts Complete Combo Filter fit Diesel Engine(Include Four Fittings)
- For R12T Marine Fuel Filter/Water Separator complete assembly.NPT,ZG1/4-19.(Include four fittings)
- The filter units are coated with a durable electrostatically applied powder coating for superior corrosion resistance.
- This spin-on filter design is simple to replace and the reusable clear nylon collection bowl and features a self-venting drain for removing unwanted muck and water.Tighten the valve, the water will not discharge. Release the valve, the water can be free to discharge.
- Filters are designed for high performance applications, and with flow rate of 30 GPH on the R12T model, your engine will perform better than ever with clean, water-free fuel.
- Don’t be caught in the water without one of these diesel spin-on filters.
If you have difficulty in installing, you can go to YouTube to find the appropriate installation video:https://www.youtube.com/watch?v=LyeqTDVzY-A.
Specification:
1.Fuel Water Separating Filter fit 3/8 Inch NPT Outboard Motors as well.
2.Maximum Flow Rate 30 GPH (57 LPH).
3.Port / Connecting Size M18 X 1.5 Center Thread.
4.These are more suited to compact off road diesel equipment:tractors,skid steers loaders,movers.
5.Filter Rating 10 Micron.10 micron filters are over 90% efficient at removing particles as small as 10 microns. 10 micron filters are recommended to prevent damage to sensitive inboard, sterndrive and outboard fuel injection systems, Designed to trap the smallest particles and emulsified water from Diesel.
Product details:
1.Don’t be caught in the water without one of these Diesel spin-on filters.
2.Filters are designed for high performance applications, and with flow rate of 30 GPH on the R12T model, your engine will perform better than ever with clean, water-free Fuel.
3.The inlet and out let can be feed in on the same side or in one side out the other side.
4.Check and replace regularly.
R12T water separator and filter complete combo installation instruction:
1.Nylon collection bowl down when installed the water separator and filter.
2.This filter has four ports, two inputs and two outputs. We provide two plugs for the extra two ports. If you need to use two plugs, you must install them to the filter and tighten them.
3.Before installing the filter, you have to remove those plugs, teflon-tape them, and re-install them.Prevent leaks from these plugs.
4.All of the above steps are very simple to operate, you can manually disassemble, and then use the tool to install tighten.
Moeller 033320-10 10 Micron Water Separating Filter Kit
- 10 Micron Water Separating Filter Kit
- Designed for Mercury, Johnson, Evinrude, Yamaha, Suzuki, Honda, Tohatsu and Nissan engines, along with universal applications
- Includes a powder coated reusable filter head, filter, barbs and plugs
- Not recommended for use with electric fuel pumps
The Moeller 033320-10 10 Micron Water Separating Filter Kit is designed for Mercury, Johnson, Evinrude, Yamaha, Suzuki, Honda, Tohatsu and Nissan engines, along with universal applications. Includes a powder coated reusable filter head, filter, barbs and plugs. Not recommended for use with electric fuel pumps.
Ebely R12T Fuel Fittings Marine Spin-on Fuel Filter Water Separator 120AT NPT ZG1/4-19 Fit Gasoline Engine and Diesel Engine
- Fitment:Gasoline Engine and Diesel Engine
- This R12T fuel filter water separator is equipped with a self-draining drain to remove unnecessary dirt and water, the filter design is easy to replace, and the reusable transparent nylon collection bowl
- This is a separator for diesel and water, and a separator for gasoline and water.
- The flow rate of 30 GPH on the R12T model, your engine will perform better than ever with clean
- The filter unit coated with a durable coating of electrostatic powder coating, having excellent corrosion resistance
Item specifics:
PRODUCT TYPE : Filter Fuel/water Separator
-This listing is for one (1) unit. This is a new For Racor R12T Marine Fuel Filter / Water Separator complete assembly.
Product Type Filter Fuel/Water Separator
Description Replacement Fuel Filter/Water Separator
-Maximum Flow Rate 15 GPH (57 LPH)
-Filter Rating 10 Micron
-Port/Connecting Size M18 X 1.5 Center Thread
-Additional Detail Used In Model 120A Filter Assembly
Dont’ be caught in the water without one of these diesel spin-on filters. filters are designed for high performance applications, and with flow rate of 15 GPH on the R12T model, your engine will perform better than ever with clean, water-free fuel. These filter units are coated with a durable electrostatically applied powder coating for superior corrosion resistance. The unit features Racor’s famous Aquabloc II technology. This spin-on filter design is simple to replace and the reusable clear plastic collection bowl and features a self-venting drain for removing unwanted muck and water.
CARMOCAR Water Separating Fuel Filter System for outboard Motors (3/8" NPT, Composite)
Features: -Composite fuel filter clear bowl kit. -Water separating canisters. -High performance 3/8 NPT ports offer lower pressure drop rates. -Designed to trap the smallest particles and emulsified water from gasoline. Product Type: -Tools. Use: -Filter. Generic Dimensions: -10.25″ H x 14″ W x 19″ D, 24 lbs. Dimensions: Overall Height – Top to Bottom: -10.25 Inches. Overall Width – Side to Side: -14 Inches. Overall Depth – Front to Back: -19 Inches. Overall Product Weight: -24 Pounds.
R12T Fuel Filter Water Separator with Clear Bowl and Fittings 120AT NPT ZG1/4-19 Spin-on Filter Water Separator Assembly 10 Micron Element For Marine Diesel Engine Outboard Motors – Replaces # S3240
- REPLACEMENT FUEL WATER SEPARATOR FILTER – Water and other small contaminants are harmful to your engine because it may cause rust and corrosion of fuel system. Using this fuel/Water Separator Filter helps to remove emulsified water and particles down to ten microns in size, ensures that fuel arrives at your engine clean and water-free with its advanced high-capacity filtering media. Provide best protection to your engine and improve its performance!
- APPLICATIONS & REPLACE PART NUMBER – For R12T Marine Fuel Filter/Water Separator complete assembly. NPT,ZG1/4-19 ( Port / Connecting Size M18 X 1.5 Center Thread ) | Part Number:Replaces Racor S3240 R12T 120AT
- Replaces Sierra 18-7987
- Replaces RK10222. Please check the Part Number before ordering, Thank You!
- OEM DESIGN, PERFECT MATCH – Spin-on filter design is simple to replace and the reusable clear nylon collection bowl and features a self-venting drain for removing unwanted muck and water. Tighten the valve, the water will not discharge. Release the valve, the water can be free to discharge.
- PREMIUM QUALITY & SPECIAL TIPS – Constructed of durable electrostatically applied powder coating for superior corrosion resistance. Direct replacement for a proper fit and easy installation, quality materials used, meets or exceeds OEM standards, 100% rigorously tested before shipping. ( ATTENTION : Don’t be caught in the water without one of these Diesel spin-on filters
- The inlet and out let can be feed in on the same side or in one side out the other side.)
- BUY WITH CONFIDENCE – Order this R12T Fuel Water Separator Filter Kit Assembly from Yinlowa, we will offer a 12-MONTH Warranty and LIFETIME Support, true hassle-free shopping experience. If you have any question, please feel free to contact us, we will help you sort it out asap 🙂
Yinlowa Spin-on Fuel and Water Separator Filter With Nylon Collection Bowl and Fittings For Racor R12T S3240 12AT NPT ZG1/4-19
Features:
– This fuel filter r12t combo kit includes fittings needed. Direct replacement for the broken one!
– Coated with a durable electrostatically applied powder coating for superior corrosion resistance.
– These are more suited to compact off road diesel equipment:tractors,skid steers loaders,movers.
– Traps 92% of harmful water or contaminants, your engine will perform better than ever with clean, water-free fuel
Specifications:
– Filter Rating: 10 Micron
– Maximum Flow Rate: 30 GPH (57 LPH)
– Port / Connecting Size: M18 X 1.5 Center Thread
– OEM Part Number: Replaces Racor R12T 120AT S3240
Instruction for R12T Water Separator and Filter Complete Combo:
1). Nylon collection bowl down when installed the water separator and filter.
2). This separator marine filter has four ports, two inputs and two outputs. We provide two plugs for the extra two ports. If you need to use two plugs, you must install them to the filter and tighten them.
3). Before installing the filter, you have to remove those plugs, teflon-tape them, and re-install them.Prevent leaks from these plugs.
4). All of the above steps are very simple to operate, you can manually disassemble, and then use the tool to install tighten.
Buy with Confidence. Any question? Please don’t hesitate to contact us!
Similar items with 4 stars and above
Sierra International 18-7945 10 Micron Fuel Water Separating Filter for Mercury/MerCruiser and Yamaha
- Sierra Fuel Water Separators Remove over 99.8% of Emulsified Water from your Gasoline
- Over 90% Efficient at Removing Particles as small as 10 Micron AND Flow at 90 GPH to Feed even the Hungriest Motor
- Sierra 10 Micron Filters are Recommended to prevent Damage to Sensitive Inboard, Sterndrive and Outboard Fuel Injection Systems
- Replaces: Mercury/MerCruiser 35-802893Q01, 35-604941, 35-60494, 35-55501, 35-57250, 35-60494A5, 35-806771, 35-8052691, 35-802893Q, 35-807172 and Yamaha ABB-FUELF-IL-TR
- All Sierra parts qualify for and are covered under Sierra’s Industry Leading Customer Satisfaction Warranty
- Before Ordering, Please Verify this is the Correct Part for your Application. For Assistance, Please Call Sierra’s Tech Support at 1-877-663-8396
Sierra 18-7945 10 Micron Fuel Water Separating Filter for Mercury/MerCruiser and Yamaha
DETAILS
• Sierra Fuel Water Separators Remove over 99.8% of Emulsified Water from your Gasoline • Over 90% Efficient at Removing Particles as small as 10 Micron AND Flow at 90 GPH to Feed even the Hungriest Motor
• Sierra 10 Micron Filters are Recommended to prevent Damage to Sensitive Inboard, Sterndrive and Outboard Fuel Injection Systems
• Replaces: Mercury/MerCruiser 35-802893Q01, 35-604941, 35-60494, 35-55501, 35-57250, 35-60494A5, 35-806771, 35-8052691, 35-802893Q, 35-807172 and Yamaha ABB-FUELF-IL-TR
• Filter Size: Long – 4.35″ or 110.5mm
• Rating: 10 Micron
• Flow: 90 GPH
ABOUT SIERRA
Sierra is dedicated to protecting you and your investment. For 50 years Sierra, one of the most trusted names in the marine industry, has proudly been offering high quality engine and drive parts. Their products meet or exceed the original equipment part it replaces and are engineered to meet today’s high horsepower engine demands while withstanding the harsh marine environment.
SIERRA’S CUSTOMER SATISFACTION WARRANTY
All Sierra parts qualify for Sierra’s Industry Leading Customer Satisfaction Warranty. Sierra warrants its products to be free of defects in workmanship and materials for the useful life of the product. If a Sierra product fails to comply with the warranty, Sierra will repair or replace the defective product free of charge. The warranty is subject to additional terms, conditions and limitations. You can view Sierra’s full warranty located above in the Technical Specification Section.
Replacement S3213 18-7932-1 Fuel Water Separator Filter Kit Assembly
18-7932-1 18-7932 Marine Fuel Filter Water Separator Assembly Including 1*18-7919 filter,1*18-7853-1 bracket,1*18-7922 Clear Bowl,2*18-4256 1/4″ pipe plugs. For Application:Marine Racor,Mercury
Sierra International 18-7866 10 Micron, High Capacity Fuel Water Separator Filter for Yamaha MAR-FUELF-IL-TR
- Sierra Fuel Water Separators Remove over 99.8% of Emulsified Water from your Gasoline
- Over 90% Efficient at Removing Particles as small as 10 Micron AND Flow at 90 GPH to Feed even the Hungriest Motor
- Sierra 10 Micron Filters are Recommended to prevent Damage to Sensitive Inboard, Sterndrive and Outboard Fuel Injection Systems
- Replaces: Yamaha MAR-FUELF-IL-TR
- All Sierra parts qualify for and are covered under Sierra’s Industry Leading Customer Satisfaction Warranty
- Before Ordering, Please Verify this is the Correct Part for your Application. For Assistance, Please Call Sierra’s Tech Support at 1-877-663-8396
Sierra 18-7866 10 Micron, High Capacity Fuel Water Separator Filter for Yamaha MAR-FUELF-IL-TR
DETAILS
• Sierra Fuel Water Separators Remove over 99.8% of Emulsified Water from your Gasoline • Over 90% Efficient at Removing Particles as small as 10 Micron AND Flow at 90 GPH to Feed even the Hungriest Motor
• Sierra 10 Micron Filters are Recommended to prevent Damage to Sensitive Inboard, Sterndrive and Outboard Fuel Injection Systems
• Replaces: Yamaha MAR-FUELF-IL-TR
• Filter Size: High Capacity – 6″ or 152.4 mm
• Rating: 10 Micron
• Flow: 90 GPH
ABOUT SIERRA
Sierra is dedicated to protecting you and your investment. For 50 years Sierra, one of the most trusted names in the marine industry, has proudly been offering high quality engine and drive parts. Their products meet or exceed the original equipment part it replaces and are engineered to meet today’s high horsepower engine demands while withstanding the harsh marine environment.
SIERRA’S CUSTOMER SATISFACTION WARRANTY
All Sierra parts qualify for Sierra’s Industry Leading Customer Satisfaction Warranty. Sierra warrants its products to be free of defects in workmanship and materials for the useful life of the product. If a Sierra product fails to comply with the warranty, Sierra will repair or replace the defective product free of charge. The warranty is subject to additional terms, conditions and limitations. You can view Sierra’s full warranty located above in the Technical Specification Section.
Conclusion
By our suggestions above, we hope that you can found aluminum marine fuel water separating filter for you.Please don’t forget to share your experience by comment in this post. Thank you!