The 9 Best Liftmaster Model 1265267 Torsion Spring

WARNING: Torsion springs, extension springs, and related door hardware can cause serious injury or death if not handled and installed properly. Professional installation is recommended. Do NOT attempt to install springs or hardware yourself unless you have the proper tools, reasonable mechanical aptitude and experience, and upper arm strength. Read and understand all instructions before you begin work. Extension and torsion springs, along with attached hardware, are under extreme tension at all times. All tension must be released from springs before any work is performed.

WARNING: Torsion springs, extension springs, and related door hardware can causeserious injury or death if not handled and installed properly.Professional installation isrecommended.Do NOT attempt to install springs or hardware yourself unless you have the proper tools, reasonablemechanical aptitude and experience, and upper arm strength.Read and understand all instructionsbefore you begin work.Extension and torsion springs, along with attached hardware, are under extreme tensionat all times. All tension must be released from springs before any work is performed.

WARNING: Torsion springs, extension springs, and related door hardware can causeserious injury or death if not handled and installed properly.Professional installation isrecommended.Do NOT attempt to install springs or hardware yourself unless you have the proper tools, reasonablemechanical aptitude and experience, and upper arm strength.Read and understand all instructionsbefore you begin work.Extension and torsion springs, along with attached hardware, are under extreme tensionat all times. All tension must be released from springs before any work is performed.

WARNING: Torsion springs, extension springs, and related door hardware can causeserious injury or death if not handled and installed properly.Professional installation isrecommended.Do NOT attempt to install springs or hardware yourself unless you have the proper tools, reasonablemechanical aptitude and experience, and upper arm strength.Read and understand all instructionsbefore you begin work.Extension and torsion springs, along with attached hardware, are under extreme tensionat all times. All tension must be released from springs before any work is performed.

WARNING: Torsion springs, extension springs, and related door hardware can causeserious injury or death if not handled and installed properly.Professional installation isrecommended.Do NOT attempt to install springs or hardware yourself unless you have the proper tools, reasonablemechanical aptitude and experience, and upper arm strength.Read and understand all instructionsbefore you begin work.Extension and torsion springs, along with attached hardware, are under extreme tensionat all times. All tension must be released from springs before any work is performed.

The DURA-LIFT 110 Pound Heavy-Duty Extension Garage Door Spring 2-Pack is an extension spring replacement for broken sectional garage door extension springs. All DURA-LIFT springs meet the DASMA standard rating of 10,000+ door open and close cycles. All springs are spray painted and oil tempered for corrosion resistance and longevity.

TECHNICAL DETAILS:

• For 110 pound garage doors
• ~25″ coil-to-coil length
• Double looped ends
• 2x extension springs included

DURA-LIFT™ 100% SATISFACTION GUARANTEE:

DURA-LIFT™ products are warranted against defects or failures for one year from the purchase date. Should you incur a defect or failure during this period, we will assist you or replace the product(s) at no additional cost.

Need Application Help?

We know that you want to be sure that you are replacing the correct garage door hardware! If you have any questions about this product’s compatibility for your specific application, please reach out and ask our experts!

DASMA WARNING:

HIGH SPRING TENSION CAN CAUSE SERIOUS INJURY OR DEATH. DO NOT adjust, repair or remove springs or parts to which springs are connected, such as steel brackets, cables, wood blocks, red colored fasteners or other parts of the counterbalance system. Adjustments or repairs must ONLY be made by a trained door systems technician using proper tools and instructions.

Garage Door Torsion Springs 225 X 2″,(Pair) With Winding Bars-Spring,

Our Made in U.S.A.
High Quality Coated Torsion Springs are factory coated black for smoother, cleaner operation and also
corrosion resistant and oil tempered for longer life.
For use on doors 7′ or 8′ high doors with 4″ standard lift drums. Engineered for maximum application range.
Minimum 10,000 cycles, at +/- 7.5 lbs of target door weight. Springs are made of steel coils with aluminum
cones.
Make sure you order the correct spring by comparing the information in spring length tab with what you
have.
Measure your current spring (broken pieces included) from spring coil end to end – cones not included.
How to Determine if Torsion Spring is Left Hand or Right Hand Wound:
Standard springs are coded red and black. Red is right hand wind. Black is left hand wind. Always determine
the wind of the wire.
To determine if you are ordering a right wind spring or left wind spring the easiest way would be check the
coloring coding – if is it red or black.
Please note the side of door the spring is mounted DOES NOT indicate spring wind needed. Standard
garage door systems have the right hand wound red winding cone on the end and will be mounted w/ the
red winding cone pointing towards the LEFT. The left hand wound black winding cone will be mounted w/ the
black winding cone pointing towards the RIGHT.
Right hand wind would be wound counter clock wise in this diagram with the spring mounted on the left side
of bracket.
Left hand wind would be wound clockwise in the diagram with the spring mounted on the right side of
bracket.
After you’ve determined the the left & right hand winds you should have enough information to order.

Product Description

Use this steel right hand wound torsion spring to replace broken garage door springs. It includes stationary and winding cones with .243” wire size x 2 “ inside dimension x 32” length with yellow color code. This torsion spring is a regular duty spring with an estimated lifetime rating of 10,000 cycles. These types of torsion springs provide lifting force for heavy garage doors and must be selected by the spring’s dimensions, rather than the door’s weight. See the product specifications with illustrations found in Prime-Line’s Torsion Spring Selection Guide to assure that the proper replacement spring has been selected. Steel winding rods are used to wind and unwind the tension on torsion springs and they are the only tools recommended for this purpose. Two winding rods are required for torsion spring replacement. When dual spring installations are involved, it is important to correctly install both the left and right wind springs during the same job. In the case of dual spring installations, note that the proper use of RIGHT WIND and LEFT WIND springs is imperative. Also, when dual spring installations are involved, it is important to replace both springs, as replacing only one spring may add increased strain to the older non-replaced spring. As an important safety precaution: all broken or malfunctioning hardware should be replaced with matching hardware, without any modifications. Garage door torsion springs can cause serious injury if not handled and installed properly. If attempting to replace the torsion springs yourself, it is important that the removal or adjustment of torsion springs is not attempted with any other tool other than Prime-Line’s item number GD-52238. Failure to utilize Prime-Line’s item number GD-52238 for the replacement of these springs may result in severe personal injury. Note: To determine the handing of your torsion spring wind, look at the end of the spring with the ‘finger’ of the spring at the top of the wind. When the end of the spring is at 12:00 o’clock and it is pointing to the left, the spring is a right wind; if the end of the spring points to right (positioned at 12:00 o’clock) it is a left wind. When standing inside the garage looking outside, the torsion spring with the black painted winding cone installs on the right side of the door, and the torsion spring with the red painted winding cone installs on the left side of the door.

From the Manufacturer

This torsion spring is constructed of steel and it includes a stationary cone and a winding cone attached to opposite ends of the spring. These types of torsion springs provide lifting force for heavy garage doors and must be selected by the spring’s dimensions, rather than the door’s weight. See the product specifications with illustrations found in Prime-Line’s Torsion Spring Selection Guide to assure that the proper replacement spring has been selected. In the case of dual spring installations, note that the proper use of LEFT WIND & RIGHT WIND springs is imperative. Also, when dual spring installations are involved, it is important to replace both springs, as replacing only 1 spring may add increased strain to the older non-replaced spring. This torsion spring is a regular duty spring with an estimated lifetime rating of 10,000 cycles. As an important safety precaution: all broken or malfunctioning hardware should be replaced with matching hardware, without any modifications. These garage door torsion springs can cause serious injury if not handled and installed properly. If attempting to replace the torsion springs yourself, it is important that the removal or adjustment of torsion springs is not attempted with any other tool other than Prime-Line’s item number GD-52238. Failure to utilize Prime-Line’s item number GD-52238 for the replacement of these springs may result in severe personal injury. These winding rods are used to wind and unwind the tension on torsion springs and they are the only tools recommended for this purpose. Note: To determine the handing of your torsion spring wind, look at the end of the spring with the ‘finger’ of the spring at the top of the wind. When the end of the spring is at 12:00 o’clock and it is pointing to the left, the spring is a right wind; if the end of the spring points to right (positioned at 12:00 o’clock) it is a left wind. When standing inside the garage looking outside, the torsion spring with the black painted winding cone installs on the right side of the door, and the torsion spring with the red painted winding cone installs on the left side of the door.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy liftmaster model 1265=-267 torsion spring, eg:

• What are Top 10 liftmaster model 1265=-267 torsion spring for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 liftmaster model 1265=-267 torsion spring to buy?
• What are Top Rated liftmaster model 1265=-267 torsion spring to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) liftmaster model 1265=-267 torsion spring?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for liftmaster model 1265=-267 torsion spring.
• Before deciding to buy any liftmaster model 1265=-267 torsion spring, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose liftmaster model 1265=-267 torsion spring and What you should consider when buying the liftmaster model 1265=-267 torsion spring and Where to Buy or Purchase the liftmaster model 1265=-267 torsion spring. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 liftmaster model 1265=-267 torsion spring of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about liftmaster model 1265=-267 torsion spring.

Conclusion

By our suggestions above, we hope that you can found liftmaster model 1265=-267 torsion spring for you.Please don’t forget to share your experience by comment in this post. Thank you!