rinstips 
Nowadays, there are so many products of home heating circulation pump pipe flange in the market and you are wondering to choose a best one. You have searched for home heating circulation pump pipe flange in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings home heating circulation pump pipe flange which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Grundfos 59896341 Super Brute Circulator UPS15-58FC
Product Description
The pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid. The pump is characterized by ceramic shaft and radial bearings, carbon axial bearing, stainless steel rotor can and bearing plate, corrosion-resistant impeller, composite, PES, and cast iron pump housing. The motor is a 1-phase motor. No additional motor protection is required.
From the Manufacturer
Grundfos UPS15-58FC circulator pump (Grundfos# 59896341) incorporates a cast iron housing, three speed motor (Low/Med/High) and a built-in, removable check valve. Grundfos UPS15-58FC is among the most popular and most versatile circulator pump models on the market. Pump’s performance parameters cover nearly all traditional heating applications – from radiant and baseboards, to fan coils and zoning and many others. 3 speeds allow to set up the circulator pump in a way, that matches the system’s requirements, while wet rotor design allows it to be virtually silent while operating.
Armstrong 110223-306 1/25 Horsepower Astro 230SS Wet Rotor Circulator, Stainless Steel
- Extra quiet operation for residential, office commercial, hospital or educational institutions
- Designed for use in open-loop heating applications, including hydronic, radiant heat
- e-Coating on the inside of the pump provides an enhanced corrosion protection for longer pump life and less debris in the system
- Large wiring box and convenient plug-in terminal strip
- Standard flange (2-1/2″ OC holes), compatible with other brand flanges & isolation valves
Product Description
The Armstrong Astro 230 is a hydronic circulator that conserves energy and eliminates maintenance. Armstrong’s Astro Circulator is intended for circulating water or ethylene glycol solutions in closed hydronic or solar heating systems. It is designed with no mechanical seals or couplers to replace, and no lubrication is required. Armstrong Astro 2 hot water re-circulation systems automatically circulate water through domestic hot water distribution pipes. This helps to ensure that everyone in the household has “instant” hot water at the tap when they need it. ***Rubber gaskets included with pump*** Typical Applications Designed for domestic water or open-loop heating applications like radiant heating, baseboard and other systems. Flow Range: 0-18 GPM Head Range: 0-18 Feet Maximum Fluid Temperature: 230 degrees F (110 degrees C) Horse Power: 1/25 Working pressure: 150 PSI Connection: Flanged 3-Speed functionality
From the Manufacturer
Armstrong Astro 2 hot water re-circulation systems automatically circulate water through domestic hot water distribution pipes. This helps to ensure that everyone in the household has “instant” hot water at the tap when they need it.
Grundfos 519601 3/4-Inch GF 15/26 Cast Iron Flange Set
From the Manufacturer
Grundfos cast iron flange sets include: 2 each – flanges, gaskets, bolts with nuts. Use with Versa Flo UP and UPS pumps.
Taco 0011-F4 1/8-HP Cast Iron Cartridge Circulating Pump
Product Description
The Taco 0011 is specifically designed for high head / medium flow applications in large residential or light commercial closed loop hydronic heating and chilled water cooling systems. Ideal for high pressure drop boilers, fan coil units, heat exchangers, large radiant heating and heat recovery/geothermal systems. The 0011 should be used on open loop systems. The unique replaceable cartridge contains all of the moving parts and allows for easy service instead of replacing the entire circulator. Universal flange to flange dimensions and orientation allows the 0011 to easily replace other models. Compact, low power consumption design makes it ideal for high-efficiency jobs. Features: exclusive ACB anti-condensate baffle with ambient air flow – protects motor windings against condensate buildup, high velocity performance – compact design, quiet and efficient operation, direct drive – low power consumption, unique replaceable cartridge design – field serviceable, self lubricating, no mechanical seal, unmatched reliability, maintenance free, universal flange to flange dimensions, and cast iron construction. Motor Type: Permanent Split Capacitor Impedance Protected. Maximum Flow: 21 GPM. Maximum Head: 31′. Minimum Fluid Temperature: 40°F (4°C). Maximum Fluid Temperature: 230°F (110°C). Maximum Working Pressure: 150 PSI. Connection Sizes: 3/4″, 1″, 1-1/4″, and 1-1/2″ Flanged. Dimensions: 7-1/2″ x 6-1/8″ x 3-1/2″ x 3-3/8″ x 5-5/8″ x 6-1/2″.
From the Manufacturer
The Taco High Velocity Series 0011 Cartridge Circulator is specifically designed for high-head/medium-flow applications in large residential/light commercial closed-loop hydronic heating and chilled water cooling systems.
Similar items with 4 stars and above
Grundfos UP26-64F 52722330 1/12 HP Circulation Pump
Product Description
The pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid.
From the Manufacturer
The Grundfos UP26-64F circulator pump (52722330) is a single-speed, low energy consumption and maintenance-free circulator pump. Grundfos UP26-64F is designed for use in high flow and medium/high head closed loop heating applications such as hydronic heating, radiant floor heating, fan coils, snow melting and many others. The UP26-64 model also incorporates an automatic resetting thermal protection that assures motor safety and longer life.
Grundfos 59896155 UP15-42 F 115V Brute 9H Recirculator Pump
- Cast iron Flow range – 0- 15.5 U.S. GPM, Head range -1- 15-Feet
- Ceramic shaft and radial bearings with Carbon axial bearing and Stainless steel rotor can and bearing plate
- Corrosion-resistant impeller, Composite, PES
- Type of connection: C.I. Flange / Pipe connection: 2 – Bolt Flange
- The motor is a 1-phase motor. No additional motor protection is required
Grundfos UP15-42F Circulator Pump (59896155) is a 1/25HP cast iron circulator pump designed for use in closed loop heating applications, such as radiant heating, baseboards, fan coils, etc. Features include a built-in motor protection for longer life and better performance. It is suitable for a wide range of applications, including radiant heating, hydronic heating, fan coil heating, solar and other system types. Grundfos circulation pump has a whisper-quiet operation for sound sensitive installations. Box includes (2) Gaskets (O-rings).
Armstrong 110223-308 1/20 Horsepower Astro 250SS Wet Rotor Circulator, Stainless Steel
Product Description
Armstrong Astro 2 hot water re-circulation systems automatically circulate water through domestic hot water distribution pipes. This helps to ensure that everyone in the household has “instant” hot water at the tap when they need it.
From the Manufacturer
Armstrong Astro 2 hot water re-circulation systems automatically circulate water through domestic hot water distribution pipes. This helps to ensure that everyone in the household has “instant” hot water at the tap when they need it.
Grundfos 539605 GF 1-1/2-Inch 40/43 Cast Iron Flange Set
From the Manufacturer
Grundfos cast iron flange sets include: 2 each – flanges, gaskets, bolts with nuts. Use with Versa Flo UP and UPS pumps.
WILO 4090765 Star S21Fx CI 3 Speed Circulator
Product Description
Overview: Wet rotor circulation pump, with flanged connection. (Flange parallel to shaft). Pre-selectable speeds to adjust the capacity on “S” versions. Cast iron body for hot-water heating systems of all kinds, industrial circulation systems, cold-water systems and air-conditioning systems. Features: Suitable for any installation position with horizontal shaft; terminal box in 3-6-9-12 o’clock position. Three pre-selectable speed stages for load adjustment (“S” type only). Impedance protected motor, motor protection not required. Cable entry both sides of terminal box. Quick connection spring clips for simple electrical connection. Steel Terminal Box. Fits all Competitor’s Models. Powerful Starting Torque. Ultra Quiet. Reliable Wet Rotor Technology. Automatically Vented.
From the Manufacturer
Overview: Wet rotor circulation pump, with flanged connection. (Flange parallel to shaft). Pre-selectable speeds to adjust the capacity on “S” versions. Cast iron body for hot-water heating systems of all kinds, industrial circulation systems, cold-water systems and air-conditioning systems. Features: Suitable for any installation position with horizontal shaft; terminal box in 3-6-9-12 o’clock position. Three pre-selectable speed stages for load adjustment (“S” type only). Impedance protected motor, motor protection not required. Cable entry both sides of terminal box. Quick connection spring clips for simple electrical connection. Steel Terminal Box. Fits all Competitor’s Models. Powerful Starting Torque. Ultra Quiet. Reliable Wet Rotor Technology. Automatically Vented.
Bell & Gossett 118223 Pump Motor Mount
Product Description
Bell & Gossett Series 100 Single Phase Circulating Pump. Item #4, Bearing assembly suitable for potable water Pump Motor Mount. 1/12HP-1/6HP MOTOR MOUNTS PER PAIR. (ARM810120-000).
From the Manufacturer
Bell & Gossett Series 100 Single Phase Circulating Pump. Item #4, Bearing assembly suitable for potable water Pump Motor Mount. 1/12HP-1/6HP MOTOR MOUNTS PER PAIR. (ARM810120-000).
Conclusion
By our suggestions above, we hope that you can found home heating circulation pump pipe flange for you.Please don’t forget to share your experience by comment in this post. Thank you!
