Which Is The Best 10 Liter Heating Mantle

Introduction

◎ Very compact and simple to operate

◎ Knob Control,Temperature range: Rt-380 degree

◎ Heat and corrosion industrial plastic alloy housing for durability

◎ Adjustable temperature

Specification

Volume:10L

Heating Power: 2100W

Inner Sleeve Material: Alkali-free glass fiber, Handmade

Shell Material: Corrosion Resistant Industrial Plastic or Aluminium Alloy

Temperature Range : Rt-380°C

Temperature Adjuet: Knob Control

Working Temperature: Rt to 40°C

Voltage: 220V/ 110V Optional

Dimensions (CM): 50*50*38

Weight (KG): 21

Introduction

The short path distillation is widely used in enrichment, crystallization, drying, separation, drug, solvent recycling, bio~pharmaceutical industry and so on. It’s under vacuum conditions, through constant heating, rotating at a constant speed rotation of the bottle, large~area thin film formed on the cylinder walls, and high efficiency. Through efficient glass condenser cooling, recycling collection, and dissolved steam, improve the efficiency of evaporation. Intensive purification of biological products, especially suitable for high~temperature decomposition.

Specification

Short Path

34/45 10000ml, 3-neck Round Bottom Flask *1

Fractional Distillation Head with Vacuum Port*2

24/40 Thermometer Adapter*1

24/40 2000ml Receiving Flask*2

24/40 250ml Distillation Cow Receiver*2

24/40 1000ml Round Bottom Flask*1

Cast Iron Stand 250*160mm*1

Chain Clamp Clamping diameter 40-145mm*1

Lab Stand 304stainless steel lifting platform 200*200mm*1

GL-14 Connectors*12

#24 Plastic Clips *4

24/40Cold Trap *1

14/20 Thermometer Adapter*2

Three Glass Connector*2

#34 SS Clips *2

220V 10L Stirring Heating Mantle

Lab Equipment 10000mL/10L Short Path Distillation Kit 220V with Digital Thermometer /Heating Mantle/Cold trap Short-path distillation is a distillation technique that involves the distillate travelling a short distance. It is method of separating mixtures based on differences in their volatilities in a boiling liquid mixture under reduced pressure. As the sample mixture to be purified is heated, its vapors rise a short distance into a vertical condenser where they are colled by water. This techniques is used for compounds which are unstable at high temperatures because it allows a lower boiling temperature to be used. The advantage is that the heating temperature can be considerably lower (at reduced pressure) than the boiling point of the liquid at standard pressure, and the distillate only has to travel a short distance before condensing. A short path ensures that little compound is lost on the sides of the apparatus. We provide turnkey solution for short path distillation. The entire kit includes a magnetic stirring heating mantle, glassware kit for short path distillation. cold trap, heater / chiller for precisee cooling of condenser and necessare accessories (tubes, lab jack, etc.)

HFS 10000ML heating and stirring mantle is a classic model that comes with a compact LED display. It is designed for mixing and heating liquids in laboratories, schools or factories. The fabric provides an effective heating space and its soft surface reduces the chance of damage to glassware.
Technical Details
Voltage: 220V 60Hz
Motor Power: 40W, DC 14-24V
Heating Power: 180W-2200W
Temperature Tolerance: ±1℃
Temperature range: Ambient-380℃
Rotation speed range: 50-1800 rpm
Boiling time: 10-25min for water
Furnace wire: Cr20Ni80
Insulation layer: alkali-free glass fiber, can bare 450℃
Insulation coefficient :relative humidity ≤35%,the coefficient≥500M
Working mode: Continuously
Fuse pipe:ø5×20 15A
Packing list:
Qty: 1: HFS 10L Magnetic Heating Mantle
Qty: 1 PTFE Stir Bar
Qty: 1 External temperature probe.
Qty: 1 Stainless steel support rod (15 inches)

Conclusion

By our suggestions above, we hope that you can found 10 liter heating mantle for you.Please don’t forget to share your experience by comment in this post. Thank you!