rinstips 
Nowadays, there are so many products of rpi 3 case cooling in the market and you are wondering to choose a best one. You have searched for rpi 3 case cooling in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings rpi 3 case cooling which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Miuzei Raspberry Pi 3 B+ Case with Fan Cooling and 3× Heat-Sinks, 5V 2.5A Power Supply with On/Off Switch Cable for RPi 3 B+, 3B, 2b
- 9 Layers case for Raspberry Pi 3 model B+ / Raspberry pi 3 / pi 2 (Not include Pi Board)
- Case has the designed layout for the Raspberry pi 3 model b+ and will perfectly protect your pi components
- Made of Acrylic, the pi case makes sure that won’t block Pi’s Wifi / Bluetooth signal
- Accurate plugs on the case are available to connect Pi’s GPIO, HDMI, USB, SD, Power Supply etc ports
- Specially Come with mini fan and 3 pcs heatsinks for quick cooling CPU/ROM/RAM, also has a stable 2.5A power supply with a handy on/off switch on the 1.5m long cable
(The Same Case Kit for RPI 4, please go to: http://www.amazon.com/dp/B07TTN1M7G)
This is 9 layers case for raspberry pi 3 model B+, also could compatible with raspberry pi 3 /pi 2 .
Product Feature:
1. All ports are available
Special design is easy to insert/remove SD card, allows Breakout cable, HDMI cable and other ports for RPi access.
2. Better heat dissipation performance
The mute mini cooling fan and aluminum heatsinks have stronger heat radiation while the pi board working.
3. Good quality material
The raspberry pi 3 case with clear acrylic layers is more durable to protect your RPi board!
4. Crystal-like appearance
Clear case is easy to watch the internal state while pi board working to check if all electronic components function normally.
Package Included:
1x Acrylic Case for Raspberry Pi 3 model B+ / 3 / 2
1x Mute Cooling Fan
1x 5V 2.5A Power Supply
3x Aluminum Heat Sinks 14*14*6mm x 2(Large) 9*9*5mm x 1 (small)
4x Metal Screws and Bolts for the case
Related Item:
Miuzei Raspberry Pi 3 B+ Case with Fan (The same case without power supply): http://a.co/1YTEbRO (B07C6CFL2B)
Miuzei Raspberry Pi Camera Module: http://a.co/eBHmA2y (B07BTP8VXL)
Note: Please peel off the protective films on the top and bottom layers before use, the film was tiny and not easily noticeable
Please make sure the layer 3 was installed right, if you installed it 180 degrees backwards, it will make all the difference in the power plug fitting.
(1) Small components inside, please away from young kids below 3yrs.
(2) Kindly to know this case can’t fit for ASUS tinker board.
Any question there, please don’t hesitate to contact us to get support and services via Buyer Message or Q&A
Similar items with 4 stars and above
MakerFocus Raspberry Pi 3 Case Protective Case, Raspberry Pi 3.5 inch Display Case, with Mini Cooling Fan Heatsink Kit for Raspberry Pi 3B, 3B+,2B,2B+ Compatible with Raspberry Pi 3.5 inch Display
- Installation instructions video: ★https://drive.google.com/file/d/1n6y5fzvX74SwWc_HFvO6YHhfe32-4vgi/view
- ★https://drive.google.com/open?id=1rx11diEefXeZ3Ig40MzuMXO3-9tdFoo3. PLZ NOTE: ★This case is not compatible with 3.5 Inch HDMI TFT LCD Display, It is designed to RPI 3.5 Inch GPIO Display, ★The 3.5 inch screen is not included!!!
- Dual-use: You can use it only on the Raspberry Pi motherboard, or use it on the Raspberry Pi motherboard and Raspberry Pi 3.5inch display,Then decide whether to cover the its cover. (Note: The Raspberry Pi motherboard and Raspberry Pi 3.5inch display are not included!!!)
- Can install mini cooling fan: The case when used without the display screen, you can install mini cooling fan, Snap-in installation, the cooling fan was included in packaging.
- With GPIO open position: There is a GPIO open position on this case cover,when you use it only with Raspberry Pi motherboard, it can easy to pull up and insert the GPIO pins, don’t need to open the cover. This case is easy to install and has good ventilation.
- With cable guide hole: It reserved cable guide hole for the camera, more convenient to use with camera(Rpi camera purchase link: https://www.amazon.com/dp/B06XYDCN5N).
Raspberry Pi 3 Case Protective Case, Raspberry Pi 3.5 inch Display Case, Enclosure Box with Mini Cooling Fan Heatsink Kit for Raspberry Pi 3B, 3B+,2B,2B+ Compatible with Raspberry Pi 3.5 inch Display
This protective case is designed specifically for the Raspberry Pi 2 Model B/B+ and Raspberry Pi 3 Model B and 3.5inch display;
It provides the best available protection/accessibility for the Raspberry Pi 2 Model B and Raspberry Pi 3 Model B and 3.5 inch display.
This case is easy to install and has good ventilation, it can install the cooling fan when you have not use the display.
There is a GPIO open position with this case, easy to pull up and insert the GPIO pins, don’t need to open the case.
It with a compact design, simple and elegant, transparent environmental protection material.
Package Including:
1 * Raspberry Pi Case
3 * Heat Sink
1 * Mini Cooling Fan with screws
iUniker Raspberry Pi 3 B+ Case, Raspberry Pi Fan ABS Case with Cooling Fan, Raspberry Pi Heatsink, Simple Removable Top Cover for Pi 3 B+, Pi 3 Model B, Pi 2 Model B (Black for 3B+/3B)
- Unique Removable Top Cover Design, you can get in touch with the GPIO or Camera Connector Very Simple
- With 30mm Large Quiet Cooling Fan, it can drop the temps for your Pi
- Include Raspberry Pi Heatsink, Better Cooling Experience
- Awesome Looking, it can make your Pi looks Cooler than others
- NOTICE: Updated version can compatible with Pi 3 Model B+ / Pi 3B
iUniker Raspberry Pi 4 Case, Raspberry Pi 4 Fan ABS Case with Cooling Fan, Raspberry Pi 4 Heatsink, Simple Removable Top Cover for Pi 4 Model B/ 4B (Black with Large Fan)
- Unique Removable Top Cover Design, you can get in touch with the GPIO or Camera Connector Very Simple
- With 40mm Quiet Cooling Fan, it can drop the temps for your Pi
- Include Raspberry Pi 4 Heatsink, Better Cooling Experience
- Awesome Looking, it can make your Pi looks Cooler than others
- NOTICE: Updated version can compatible with Pi 4 Model B
Smraza for Raspberry Pi 3 B+ Case with 5V 3A Power Supply with On/Off Switch, Fan Cooling and Heatsinks, Case Compatible with Raspberry Pi 3 Model B+, 2B, 3B Plus(Black)
- Smraza Acrylic Case fits for Raspberry pi 3 B+ 3 Model B, easy assembly with instructions.
- 1pc Mini Fan + 3pcs Aluminium heatsinks are included.
- 59 inch Power Cable w/ switch button – Just Press button to turn on/off your pi, convenient to use.
- 5V 3A Power Supply – Power for all versions of Raspberry pie and other USB device.
- Enough mount for pi 3b+/3B/2b ports – Case allow sd card, ribbon cable and other GPIO connectors in.
Smraza for RPi 3 B+ black case for Rapberry pi 3,2 model b, classic case for RPI and it protects your pi safe well.
About Updated Case Kit:
1. For the customer expections, this updated 9 layers case with only 2 pieces plastic films on(the top and the bottom pieces), it save time time to remove all pieces films.
2. Two black larger aluminum heatsinks(14mm x 14mm x 6mm) + One small heatsink (9mm x 9mm x5mm) could be cool down the Pi board better.
Note:
1. Before you assemble this case, please read our case instruction and remove the protective films.
2. This product does not include the Raspberry pi board.
3. This case is not compatible with Asus tinker board due to the design difference.
Package Included:
1) black case x1
2) heatsinks x3
3) 5V/3A Power supply adapter x1
4) Cable length:5ft/(1.5 meter) x1
5) Mini fan x1
About Smraza:
We are a leading manufacturer of electronic components for Arduino and Raspberry Pi. If you have any questions about our product, please feel free to contact us to get technical support and services by Buyer Message or Q&A .
Related Items:
Smraza GPIO Breakout Board + Jumper Wires + 830 Points Breadboard: http://a.co/0h8fGJf
Camera Module for Raspberry Pi 3: http://a.co/9SGv32W
Eleduino Raspberry Pi 3, 2 and B+ Case Aluminum with Fan (Black)
- Aluminum case ,Customize for Raspberry Pi 3/Raspberry Pi 2/ Raspberry Pi B+
- High dimensional accuracy, surface anodic oxidation process. Durable, good heat dissipation
- Good ventilation,easy carrying Simply Clicks Together Enclosure,good heat dissipation
- Smart design，not block the wifi/BT signals
- Access to all Raspberry Pi 3 /Raspberry Pi 2 / Raspberry Pi B+ consumer ports and GSI, camera and GPIO connectors
Rpi3 Alu Case with fan*1
AURSINC Heatsink Case for Raspberry Pi 4 B with Cooling Fan, 4 Heatsinks and 5V 3A ON/Off Power Supply (RPI 4 Board Not Included) (Clear)
- Reliable Raspberry Pi 4 B Case, made of premium acrylic material, it is protective and will not block the Pi’s WiFi or bluetooth signal.
- Easy Install and Open, we have strict control for the moulding, all case ports were well cut out and accurate for Raspberry Pi 4 B HDMI, audio/video, USB, Ethernet and Power Supply ports. Note: this case is designed for Raspberry Pi 4 B ONLY.
- Better Cooling Effect, we have two ways for cooling. First, we add a cooling fan which is quite and powerful
- Second, we have 4 heatsink, one is copper heatsink for the CPU which is better than Aluminum heatsink, and 3 Aluminum heatsink for other position.
- Come with 5V 3A Power Supply, with a handy on/off switch on the power supply, overcurrent and over temperature protection, stable and safe, won’t damage your Raspberry Pi board.
- Package Included, 1x Raspberry Pi 4 B Case, 1x 5V 3A Power Supply, 1x Cooling Fan (built in the case), 1x Copper Heatsink, 1x Aluminum Heatsink. Any questions or problems, please feel free to contact us, your questions or problems will be solved within 24 hours.
Features
Well moulding, accurate ports for Raspberry Pi 4 B HDMI, Audio/Video, USB, Power Supply ports, etc
Made of premium acrylic, protect your Raspberry Pi board and will not block WiFi or bluetooth signal
5V 3A power supply, it is short circuit and over current protection, over temperature protection, safe and stable
Double cooling effect, 4 heatsinks and one cooling fans will speed up the dissipation, keep the device cool
NOTE:
This case is specially designed for Raspberry Pi 4 B. NOT compatible with other model of Raspberry Pi.
The package does not include the Raspberry Pi 4 Model B board.
Package Included:
1 x Acrylic Case for Raspberry Pi 4 Model B
1 x Copper Heatsink (for CUP)
3 x Aluminum Heatsink
1 x 5V / 3A USB-C Power Supply
1 x Quiet Cooling Fan
Argon One Raspberry Pi 3 B+ / B Case with Cooling Fan | Aluminum Heatsink | Power Button | Supports Retro Gaming, Movies, and Music
- SLEEK MULTIMEDIA CASE | This sleek aluminum case not only brings out stunning aesthetics, but it’s also highly functional by protecting the Raspberry Pi from harm and being usable for pastimes such as retro gaming, watching movies, or even playing music. This case supports Raspbian, LibreElec, Retropie, Recalbox, and OSMC.
- PASSIVE &
- ACTIVE COOLING | The Argon One itself acts as the Raspberry Pi’s heatsink for passive cooling. A proprietary software controls the fan inside the case for an active and improved temperature management.
- EASY ASSEMBLY &
- NEAT CABLE MANAGEMENT | Assembling the case with the Raspberry Pi is easy. Installing the Argon ONE Script that unlocks the full functionality of the Argon ONE in one line. All of the ports are accessed at the back, making the mini-computer manageable with minimal cable clutter and easy cleaning.
- PROPER SYSTEM SHUTDOWN | A proper power button is installed on the case to prevent file damage. Safe Shutdowns, Reboots, and Forced Shutdowns are built in features.
- MAGNETIC REMOVABLE TOP &
- ACCESS TO GPIO | The PCB Board built into the case provides separate power sources to the fan and power switch, as well as extending the GPIO pins to use the case in multiple projects. A magnetic removable top makes the pins safe when they aren’t in use.
Similar items with 4 stars and above
Smraza Raspberry Pi 3 B+ Case with Fan, RPI Heatsinks, 5V 2.5A Power Supply for Raspberry Pi 3 Model B+(B Plus), Compatible with Raspberry Pi 3 Model B, Pi 2 Model B (4 Layers Case)
- 4 layer Raspberry Pi 3 B+ Case – Specially designed for the 2018 new version Raspberry Pi 3 Model b+, and compatible with Pi 3B 2B (Not include Pi Board)
- Fans & Heatsinks Cooling – With DC 5V quiet fan and a set of Aluminum heatsinks to keep raspberry pi cool.
- Easy to access to all GPIO ports – 4 layers Acrylic case allow you use all ports of pi and won’t block signal and perfectly protect your pi components.
- Convenient to turn on/off pi – Power Cable w/ on off switch button, easy to press button to power on your pi.
- Easy to install with Instruction manual. Package include: 4 layer dark brown Case, 4pcs rubber feet, 3pcs Aluminum Heatsinks, 1pc Power Supply Adapter(5V/2.5A , Cord length: 59 inch), 1pc Mini Fan and 1pc Phillips Screwdriver.
Conclusion
By our suggestions above, we hope that you can found rpi 3 case cooling for you.Please don’t forget to share your experience by comment in this post. Thank you!
