rinstips 
Nowadays, there are so many products of 5v micro cooling fan in the market and you are wondering to choose a best one. You have searched for 5v micro cooling fan in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 5v micro cooling fan which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Usongshine 3D Printer Cooling Fan 40 x 40 x10mm 4010 DC 5V Cooling Fan with 2Pin Wire, 2 Packs of Mounting Screws (5V Pack of 2)
- Low noise: less than 20 dBA, size: 40 *40 * 10mm, High quality: Allow your machine to cool down normally.
- Wide range of applications: Suitable for hot end cooling, printers or other cooling requirements, such as: B. small communication devices for heat radiation
- PC CPU server, cooling capacity, etc.
- Interface type: JST-XHP-2, cable length: approx. 30 cm.
- Package Include: 2pcs 2Pin DC Cooling Fan and 2 packs of mounting screws.
- Excellent service: All Usongshine fans have than 12 months . In case of problems, we offer a full refund within 360 days.
Easycargo Raspberry Pi Fan 30x30x7mm, Raspberry Pi Cooling Fan Brushless 3.3V 5V DC Quiet Fan for Raspberry Pi 4, Pi 3 B+, Pi 3B, Pi 2, Pi B+, RetroFlag NESPI Case (30mmx30mmx7mm) (Black 4-Pack)
Easycargo EDL3007S05 raspberry pi cooling fan is built for low-noise and durable cooling performance. This fan is suitable for Raspberry Pi B / Raspberry Pi B+ / Raspberry Pi A+ / Raspberry Pi 2, Pi 3 model B and B+ and Raspberry Pi 4. The One-to-Two wire connector pins of this fan, can get connected into Raspberry Pi 3.3V or 5V pin to provide optional fan speed and optimum air flow adjustment. This fan can be installed for most of the standard Raspberry Pi cases and also is compatible with RetroFlag NESPI Case.
Specifications:
– Fan Size: 30x30x7.5 mm (LxWxH)
– Wire Length: 2.6 inches (66mm)
– Connector: One-to-Two pin
– Color: Black
– Bearing Type: Hypro Bearing
– Operating Voltage: DC 3.3V – 5V
– Start up Voltage: DC 3V
– Current: 120 mA
– Speed: 5000RPM±15%
– Airflow: 1.79CFM
– Noise Level: 15.92dBA
– Life Time: 30,000 hours
Package Includes: Easycargo EDL3007S05 Raspberry Pi Fan, together with screw and nut set.
Similar items with 4 stars and above
2 Pack Wathai 30mm x 10mm 5V Small DC Brushless Cooling Blower Fan
- Package include: 1 Piece fan and mounting screws & nuts
- Rated Voltage:5V 0.2A
- Speed: 9500RPM
- Air flow: 1.85CFM
- Noise:29dBA
- Connecter: XH2.54-2Pin
- Cable Length: 15cm Or 6 inches
- Bearing type: Sleeve Bearing
- Life: 35000 hours
- Dimension: 30mm(L) x 30mm(W) x 10mm(H) / 1.18×1.18×0.4 in. per fan
Package include: 1 Piece fan and mounting screws & nuts
Size:30x30x10mm
Rated Voltage: 5V
Rated Current: 0.2A
Connecter: XH2.54-2Pin
Power: 0.9W
Speed: 9500RPM
Air flow:1.85CFM
Noise:29dBA
Bearing type: Sleeve Bearing
Cable Length: 15cm Or 6 inches
Life: 35000 hours
Weight:8g/pcs or 0.28oz
Similar items with 4 stars and above
GDSTIME Dual 120mm 5V USB Fans, 102CFM Big Airflow Fan Cooling for Router TV Box Micro Computer and Other Electronics
- Dimensions: 120x120x25mm / 4.7 x 4.7 x 1 in per fan. Totally 245x125x55mm / 9.65in x 4.92in x 2.17in.
- Dual 120mm usb fans compatible for various electronics and components cooling.
- A speed controller with three gears(Low, Middle and High), which is specially designed to control the airflow levels. Meet your different needs.
- Rated Voltage: DC 5V
- Rated Current: 1.0Amp
- Rated Speed: 2000 RPM
- Air flow: 102CFM
- Noise:31.5dBA
- Sleeve bearing have a lifespan of 35,000 hours at 25 degrees and allows the fans to be laid flat or stand upright.
Similar items with 4 stars and above
Comidox 5Pcs Black Brushless DC Cooling Blower Fan 5015S 5V 0.1-0.3A 50x15mm
description
1. Ultra quiet MID speed brushless DC Blower
2. Housing Material is thermoplastic UL PBT
3. Life Expectancy at 40 Celsius degree: 40000 hours
4. Rating: DC 5V / 0.1-0.3A
5. Operating Temperature: -10 Celsius degree to +60 Celsius degree
Blade Material is thermoplastic UL94V-0 PBT
Package including:5PCS
2Packs 30x30x10mm 30mm 5V Brushless DC Cooling Exhaust Fan
- 2 Piece fan and mounting screws & nuts
- Rated Voltage:5V 0.15A
- Speed: 9000RPM
- Air flow: 3.68CFM
- Noise:24dBA
- Connecter: PH2.0-2Pin
- Cable Length: 15cm Or 5.9 inche
- Bearing type: Sleeve Bearing
- Life: 35000 hours
- Dimension: 30mm(L) x 30mm(W) x 10mm(H) / 1.18×1.18×0.39 in. per fan
Package include: 2 Piece fan and mounting screws & nuts
Size:30x30x10mm
Rated Voltage:5V 0.15A
Bearing type: Sleeve Bearing
Speed: 9000RPM
Air flow: 3.68CFM
Noise:24dBA
Connecter: PH2.0-2Pin
Cable Length: 15cm Or 5.9 inches
Life: 35000 hours
Weight:8g/pcs or 0.28oz
Similar items with 4 stars and above
120mm 5V USB Router Fan with Speed Controller High Airflow Cooling Fan for Router Modem Receiver DVR Playstation TV Box and Other Electronics
- ❤USB FAN 5V: 5V 120mm fan for cooling router modem desk PS3 PS4 Xbox etc ,it can reduce the components temp to prolong unit working life.
- ❤SPECIFICATION: Rated Voltage: DC 5V ,Rated Current:0.45A, Speed:(1200RPM-1800RPM),Noise Level:(22dBA-28dBA）,Airflow:(38CFM-56CFM).
- ❤3 SPEED CONTROLLER: 120mm fan with speed controller, you can adjust the speed from high speed 1800RPM(56CFM) , medium speed 1500RPM （45CFM), low speed 1200RPM（38CFM)to get different airflow and noise level.
- ❤DUSTPROOF FAN FILTER:120mm USB fan with dustproof fan filter to keep your devices clean.
- ❤100% 90 DAY MONEY BACK : If you are not satisfied for any reason, simply return your product for a full refund, no questions asked. You have nothing to lose.
Anmbest 2PCS 5015 DC 5V Silent Brushless Blower Radial Cooling Fan 2 pin Brushless 5CM Fans 50mm X 50mm X 15mm for RepRap 3D Printers Parts
- Black Plastic Brushless 50 x 50 x 15mm/ 1.97″ x 1.97″ x 0.59″ (L*W*H) DC 5V 0.06A BRUSHLESS DC Blower FAN.
- Provides excellent air ventilation for your PC Computer Case, CPU Cooler, VGA Cooler and other matched radiator.
- The product provide large air volume, large wind pressure, low noise, long life,even better stabilisation, precision and durability.
- DC 5V 0.06A powered with 2.5mm pitch 2 pins connector easy to be connected with your computer motherboard or 3D printer power system.
- This cooling fan can help draw in fresh cool air and push the hot air out. It looks cool and easy to assemble or maintain.
This cooling fan can help draw in fresh cool air and push the hot air out. It looks cool and easy to assemble or maintain. With a tuyere, it can move quite lot of air and it will work with very low noise and for a long life. If you are looking for cooling fan on 3D printer, this one will be a good choice. Technical Specifications:
Rated Voltage : DC 5V
Rated Current : 0.06A
Rated Power:0.3W
External Material : Plastic
Power Wire Number : 2 Wires
Main Color : Black
Motor Model : Brushless Motor
Bearing System: Sleeve Bearing
Connector : 2 Pin Connector
Speed: 2200 RPM
Noise:less than 25dBA
Size : 50 x 50 x 15mm/ 1.97″ x 1.97″ x 0.59″ (L*W*H)
Package includes:
2 x BRUSHLESS DC Blower FAN
ELUTENG 120mm Fan Cooling Transparent USB Desk Fan with Blue LED Light 5V Ventilation Fan Clear Compatible for Receiver, Router, Laptop, DVR, Playstation, Xbox, Computer Ventilator
- 【Ultra Quiet】 120mm USB fan, adopt hydraulic bearing, with the features of slient, and life span up to 20,000 hours. Noise only 27 dB.***NOTE:Power input Max 5V/0.3A, excess may damage the motor.
- 【High Airflow】7 blades maximize airflow, efficient and quickly cooling for your TV Box, Router,Receiver, Game Console, Xbox PlayStation and computer.
- 【Fully Protection】Metal grill on both sides, protect your hands, and keep cable without damage by blade of ventilation fan.
- 【Compact & Fashion Design】Mini USB fan, it can be laid flat or stand upright, perfect for narrow place. Transparent shell and technical blue LED light makes your life looks more fashionable.
- 【USB power supply】USB air cooler, plug and play, no battery needed, very convenient.
Conclusion
By our suggestions above, we hope that you can found 5v micro cooling fan for you.Please don’t forget to share your experience by comment in this post. Thank you!
