rinstips 
Nowadays, there are so many products of cr 10 heating block in the market and you are wondering to choose a best one. You have searched for cr 10 heating block in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings cr 10 heating block which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Creality Original 3D Printer Extruder Assembled MK8 Hot End Kit for CR-7,CR-8 CR-10 CR-10S S4 S5 with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle
Sunhokey Extruder Assembled MK8 Hot End Kit for CR10 with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle(12V 40W)
- High-quality 3D Printer accessories for Creality CR-10 CR-10S S4 S5.
- Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle.
- MK8 Extruder Hot End Kit, the white wire is temperature thermistor, the red wire is heating tube 12V 40W.
- Tip of the nozzle, aluminum heating block, throat pipe .
- Suitable For Creality 3D CR-10 Series.
Installation type: External thread connection
Application: Creality 3D printers CR-10 CR-10S S4 S5
Nozzle size: 0.4mm
Cable length: 1.2m
Heating Tube: 12V 40W
Operating temperature range: -40~+260°C (-40~+500°F)
Material: Aluminum+Stainless Steel+Brass
Throat length: 52mm
Aluminum block size: approx. 20 x 20 x 10mm
Included:
1 x Aluminum Block
1 x Heating Tube
1 x M6*30mm Throat Pipe
1 x Thermistor +Brass Sleeve
1x 1.75mm 0.4mm Brass Nozzle
BZ 3D CR-10 Hotend Assembly, 12V 40W MK8 Extruder Original Replacement with Aluminum Heating Block 1.75mm, 0.4mm Nozzle for CR10/ CR-10S/ CR-10S400/ CR-10S500 (CR-10 Series Hot End 12V40W)
- ★This cr-10 hotend can work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle.
- ★High quality 3D Printer accessories for Creality CR10/ CR10S/ CR10S4/ CR10S5.
- ★MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heater cartridge 12V 40W.
- ★Tip of MK8 0.4mm nozzle, aluminum heating block, throat pipe (built-in Teflon) for 1.75mm filament
- ★BZ 3D is committed to providing you with the best service!
Spec:
– Installation type: External thread connection
– Application: Creality 3D printers CR-10 CR-10S S4 S5
– Nozzle size: 0.4mm
– Cable length: 1m
– Heating Tube: 12V 40W
– Operating temperature range: -40~+260°C (-40~+500°F)
– Material: Aluminum+Stainless Steel+Brass
– Throat length: 52mm
– Aluminum block size: approx. 20 x 20 x 10mm
Included:
1 x Aluminum Block
1 x Heating Tube
1 x M6*30mm Throat Pipe (Built-in Teflon)
1 x Thermistor +Brass Sleeve
1x MK8 Silicone Sock
1x 1.75mm 0.4mm Brass Nozzle
Please note:
Due to light and screen difference, the color may be slightly different from the pictures.
Please allow 1-5mm deviation due to manual measurement.
CCTREE 15PCS 3D Printer Heating Block Cotton with Kapton Tape Hotend Nozzle Heat Insulation Cotton for Ultimaker/Makerbot/Creality CR-10
MK8 Extruder Nozzles Kit for 3D Printer 5 Pcs Aluminum Heater Block +5Pcs 1.75mm Extruder Throat Tube M6 Thread +5Pcs 0.4mm Brass Nozzle +5Pcs Cotton Heater Tape for Makerbot MK7/MK8 Prusa i3 CR-10
- ❃❃ Designed for many common types of 3D printers such as Makerbot MK7/MK8, Prusa i3 etc. Solid aluminium construction with aperture.
- ❃❃ Offers you an easy way to upgrade your hotend with plenty of MK8 brass extruder nozzles for 1.75mm Filament.
- ❃❃ Aluminium Heater Block for Extruders in 3D-Printers. A 6mm drilling with an M3 screw is scheduled for the optimal fixing of the Cartridge Heater. The Thermistor is fixed by means of a M3 grub screw in order to avoid slipping or loosening. The heating block is equipped with an M6 thread for the Nozzle.
- ❃❃ This stainless steel barrel has continuous thread so it is more universal than our standard barrel. It also has been drilled out larger at one end and a piece of PTFE teflon tube(Not included) can be inserted to reduce the chances of “barrel lock” which can stop filament feeding resulting in a failed print and otherwise only solved with the oily rag trick
- ❃❃ 2mm thick cotton heater tape for heat preservation, keep heater block and consumable work better.
Specification of Heater Tape:
Length: 62mm
Width: 20mm
Thickness: 2mm
Specification of Brass Nozzle:
Type: 0.4mm Extruder Brass Nozzle Print Head
Color: Golden.
Material: Brass
Size:5*13mm
Input Diameter:1.75mm
Output Diameter:0.4mm
Specification of Extruder Tube:
Type: Nozzle Throat Pipe
Compatibility:3D Printer
Outer Thread: M6
Length:30mm
Nozzle Throat Outer Diameter:7mm
Nozzle Throat Inner Diameter:4mm
Filament Diameter:1.75mm
Material: Stainless Steel
Specification of Heater Blocks:
Name: Metal Part
Color: Silver
Size:20*20*10mm
Screw: M6 and M3
Heating: 6mm
Package list:
5PCS X Heater Tape
5PCS X Brass Nozzle
5PCS X Extruder Tube
5PCS X Heater Blocks
Creality Original Extruder Assembled MK8 Hotend Kit for 3D Printer CR-7 CR-8 CR-10S S4 S5 with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle
- 100% Creality Orginal MK8 Full Set Hotend Kit
- Suitable For Creality CR-10 Seriers 3D Printer
- Tip of the nozzle, aluminum heating block, throat pipe (built-in Teflon)
- MK8 Extruder Hot End Kit With thermistor and Heater,12V 40W
- Thermistor and heater cable length: 1M
Products Name： Assembled MK8 Extruder Hotend Kit
Brand: Creality 3D
Usage for CR-7,CR-8 CR-10 CR-10S S4 S5
Material: Aluminum & Stainless Steel & Brass
Installation type: external thread connection
Scope of application: 3D printer
Nozzle size: 0.4mm
Throat pipe length: 30mm
Aluminum block size: 20 mm x 20 mm x 10 mm
Operating temperature range： -40 ~ +260°C (-40 ~ +500 °F)
Thermistor and heater cable length: 1M
Package Included:
1x Assembled MK8 Extruder Hotend Kit
2X 3D Printer Heat Block Silicone Sock MK7 MK8 MK9 Hotend Heating Block Cover for Makerbot Creality CR-10 Mini S4,S5 Ender 3 Anet A8 Tevo Tornado
Creality Original 3D Printer Aluminum Heater Block with Stainless Steel Throat for MK7 MK8 Extruder Creality CR-10/CR-10S S4 S5 (Pack of 3set)
- Made of solid aluminum material,durable in use
- It works perfect with nozzle and nozzle throat
- Inner hole for set screw: M6 and M3 (heat pipe and thermocouple)
- Heater Mounting Hole: 6mm diameter, Thermocouple Mounting Holes:3mm diameter
- 1 set =1*Aluminum Heater Block +1* Stainless Steel Extruder Nozzle Throat
Specifications:
Material: Aluminum
Dimensions: 20*20*10mm(LWH)
Net Weight: 7g/pcs
Inner hole for set screw: M6 and M3 (heat pipe and thermocouple)
Heater Mounting Hole: 6mm diameter
Thermocouple Mounting Holes:3mm diameter
Suitable for Makerbot printer
Package Included:
3*Aluminum Heater Block
3* Stainless Steel Extruder Nozzle Throat
Micro Swiss Heater Block Upgrade with Silicone Sock for CR10 / Ender 2 / Ender 3 / ANET A8 Printers MK7, MK8, MK9 Hotends
Micro Swiss Heater Block Upgrade with Silicone Sock for CR10 Printers
This is Micro Swiss aluminum upgrade upgrade with slotted clamping system for CR-10 family printers.
Fits:
- Creality CR-10
- Creality CR-10-S5
- Creality CR-10-S4
- Creality CR-10S
- Creality CR-10 MINI
- Ender 2
- Ender 3
- TronXY X5S
- MK7, MK8, MK9 Hotends
Conclusion
By our suggestions above, we hope that you can found cr 10 heating block for you.Please don’t forget to share your experience by comment in this post. Thank you!
