Best Rx 580 Water Cooling Block

EK-FC Radeon Vega Strix RGB is a high-performance full-cover water block for ASUS ROG Strix RX VEGA64 OC graphics card that comes with pre-installed 4-pin 12V RGB LED strip. This water block directly cools the GPU, HBM2 memory, and VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it’s VRM to remain stable under high overclocks. EK-FC Radeon Vega Strix water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. This kind of efficient cooling will allow your high-end graphics card to reach higher boost clocks, thus providing more performance during gaming or other GPU intense tasks. Moreover, such design offers great hydraulic performance allowing this product to be used in liquid cooling systems using weaker water pumps. The base of the block is CNC machined out of nickel-plated electrolytic copper while the top is CNC machined out of high-quality acrylic material. The sealing is ensured by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. The EK-FC Radeon Vega Strix RGB water block is compatible with popular RGB sync technologies from all major motherboard manufacturers since it features a classic 4-pin 12V RGB LED strip. Note: ASUS ROG Strix RX VEGA64 OC factory backplate is not compatible with this water block!

Model: 3830046995667

Compatibilities:

Asus ROG STRIX RX 480 O8G Gaming
Asus ROG STRIX RX 470 4G Gaming
Asus ROG RX 580 O8G GAMING
Asus ROG RX 590 O8G GAMING

NOTE: If your graphic card model number is not included in the compatible list. DON’T purchase it as your thought.
People purchase items by mistake will pay for the return postage fee.
Please feel free to contact us if you are not sure about it, just let us know and don’t worry. We will confirm it for you. Thanks.

Features:
1. Block with 0.5mm micro channel injection design, all designed only for performance!
2. Block using large flow design, even if low raise pump can use it.
3. Block made by high purity copper, and electroplating to prevent oxidation and makes beautiful.
4. Inlet and outlet can change direction free, easy to build watercooling system.

Please Pay Attention:
1. Please double check the graphics card detail model to ensure compatibility. Please feel free to contact us if you are not very sure.
For you convenience, 2pcs G1/4 SILVER nikel plated copper Compression Fittings for 14mm OD hard/rigid tubings are included.
3. The pictures are for reference only, we can only guarantee the performance and compatibility of the products, the factory can change product design at any time for the improvement of the product.
4. Prohibit the use of alcohol containing coolant.
5. Graphics card block installation requires a certain skill and experience, because the graphics card manufacturing tolerances may have a certain impact on the block installation, we can assist buyers to solve such problems, but this can not be the basis of returns.

Quickly mount any Kraken Series liquid cooler onto graphics cards with the Kraken G12 mounting kit. It delivers a 40% increase in cooling capacity over stock cooling, and features a newly designed bracket with an easier installation process versus the Kraken G10. Plus, the G12 is compatible with more than 30 liquid coolers on the market.

Compatibility – Graphic Cards
Nvidia
Titan X, Titan, Geforce GTX 1080 Ti, 1080, 1070, 1060, 980 Ti, 980, 970, 960, 780 Ti, 780, 770, 760, 680, 670, 660Ti, 660, 580, 570
\AMD
RX 480, 470, R9 390X*, 390*, 380X*, 380, 290X*, 290*, 285*, 280X*, 280*, 270X, 270, R7 370, HD7970*, 7950*, 7870, 7850, 6970, 6950, 6870, 6850, 6790, 6770, 5870, 5850, 5830
* Some variations in AMD die height may require the use of a copper shim which is not included.

Compatibility – AIO Liquid Coolers
NZXT
Kraken X72, X62, X52, X42, X61, X41, X31, X60, X40

Corsair
H105, H110, H90, H75, H55, H50 (CW-906006-WW only)

Thermaltake
Water 3.0 Riing RGB 360, 280, 240, Red 280, 140,
Water 3.0 Ultimate, Extreme S, Extreme, Pro, Performer
Water 2.0 Extreme, Pro, Performer

Antec
KUHLER H2O 920V4, 620V4, 920, 620

Zalman
LQ-320, LQ-315, LQ-310

Description:
2 holes on the side of the cover, the water flows from the side.
0.8 mm copper columns on the copper base.
The water contact area becomes large, so the block can carry more heat from GPU quickly.
The surface flatness is less than 0.01 mm.The base can fit the GPU better, so that it can absorb more heat.The copper base is processed with anti-oxidization technology.
Installation Accessories: Get a 4 mounting screws.
Support 43*43 48*48 53*53 three hole spacing.
Suitable for graphics cards below 1050.

Do you hate the graphics card fever? Yes? This product can effectively solve your problem!
Water Cooling System! A great accessory for your computer chassis, deals with any heat problems.
– A powerful water pump is enabled. It takes heat away much more quickly, but you don’t need to worry about leakage.
– Sometimes, the water pump is not enough for heat dissipation, so we get you an auxiliary fan, which helps to reduce heat more effectively.
– Easy to install, suitable for 58.4×58.4mm or 53.3×53.3mm buckle, which make it fit many kinds of graphic cards, for example, GTX960/980/980Ti/1050/1060/1070/1070Ti, AMD R390/290/280 or other similar cards.

Warm Tips
1. Please make sure that you know how to use BIOS before buying it.
2. Please check that if your computer chassis support 120mm water cooling system before purchase.
3. The interface of the auxiliary fan is 4pin, please connect it to the CPU Fan interface of the motherboard, and set it up in BIOS.

Fan Specifications:
Fan speed: 700-1500RPM
Air volume: 62CFM
Noise: 18.0-26.4dB (A)
Connector: 4Pin (2510)
Start-up voltage: DC 7V
Rated voltage: DC 12V
Rated current: 0.18A
Rated power: 2.16W
Size: 120X120X25mm/4.72X4.72X0.98″

Pump Specifications:
Pump speed: 2000 RPM
Pump head: 1.2m H2O
Cold liquid flow rate: 96L/H
Noise: 25.0dB (A)
Connector: SATA
Rated voltage: DC 12V
Rated current: 0.25A
Rated power: 3W
Cold Head Size: 65×32.5mm/2.56×1.28″
Cold Plate size: 154x120x27mm/6.06×4.72×1.06″
Pipe length: 315mm/12.4″

Notes:
* Please follow the user manual strictly and carefully.

Package included:
1 X GPU Cooling System
1 X Installation Kit
1 X User Manual

100% new, fine workmanship, simple sense is very strong!
Bykski XF48BW-X for Pcasl XFX RX 580 8G RX 480 4G design,please confirm before buying graphics specific specifications, to ensure the compatibility of water cooling block.
Water cooling block is designed using 0.2 MM micro channel injection, all designed for performance! Core (GPU), direct cooling graphics memory (RAM), as well as the graphics card power supply (VRM) these hot key parts of the graphics card, to ensure that the players and the stability of the overclocking, maintain a good temperature.
Graphics using large water flow design, even if the hm weaker pump can meet the demand.
Water cooling block at the bottom of the use of high purity copper manufacturing, and electroplating processing to prevent oxidation, more make water head of delicate and beautiful. Cover the use of high-quality POM material or imported acrylic materials, ensure the service life of water head and durability. Sealing material using a high standard of sealing ring resistance to ageing of fatigue, ensure the sealing water cooling block.
Video card water cooling block is free to change direction, convenient players form a SLI&CF firefight system, can be in series or in parallel.
parts list:
fast twist（3/8ID*1/2OD） X 2
plugs X 2
thermal paste X 1
mounting screws X 1
RGB LED X 1
Compatible graphics card type: XFX RX 580 8G 1366MHz/8GHz-1386MHz/8.1GHz 256bit GDDR5
Compatible graphics card type: XFX RX 480 4G 1266MHz/7GHz 256bit GDDR5
NOTE: If you are unsure whether compatible, please contact the seller or view graphics brands and models, because the description have mentioned writing compatible graphics card name and model number

Support Model: XFX SKU (RX-580A8DBW6) XFX SKU (RX-580A8DBR6) XFX SKU (RX-580A8DFR6) XFX SKU (RX-580A8DFWR) XFX SKU (RX-580A8D8BRR) XFX SKU (RX-580A8DBRR)

100% new, fine workmanship, simple sense is very strong!
Bykski A-RX580-X for Pcasl AMD foundation version RX580 Graphics design,please confirm before buying graphics specific specifications, to ensure the compatibility of water cooling block.
Water cooling block is designed using 0.2 MM micro channel injection, all designed for performance! Core (GPU), direct cooling graphics memory (RAM), as well as the graphics card power supply (VRM) these hot key parts of the graphics card, to ensure that the players and the stability of the overclocking, maintain a good temperature.
Graphics using large water flow design, even if the hm weaker pump can meet the demand.
Water cooling block at the bottom of the use of high purity copper manufacturing, and electroplating processing to prevent oxidation, more make water head of delicate and beautiful. Cover the use of high-quality POM material or imported acrylic materials, ensure the service life of water head and durability. Sealing material using a high standard of sealing ring resistance to ageing of fatigue, ensure the sealing water cooling block.
Video card water cooling block is free to change direction, convenient players form a SLI&CF firefight system, can be in series or in parallel.
parts list:
fast twist X 2
plugs X 2
grease and thermal paste X 1
mounting screws X 1
Compatible graphics card type: All Series AMD Foundation Version RX580
NOTE:Before buying, please contact the seller, the GPU WATER COOLING BLOCK compatible models, factory often modify graphics PCB, so in order to avoid after the purchase is not compatible .

The block is constructed of high purity copper that is electroplated to prevent oxidation. A high flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi block set ups.
Specifications

Compatibility

Parts Included

Warnings

This is a repair or replace only item. Returns not accepted on compatibility issues or block has had water/fluid run through it. Manufacturer reserves right to alter block design to expand compatibility. Delivered item may not 100% match pictured item. Product does NOT come with English instructions.
Tyler Direct is not responsible for any damage caused by or when using this product. Please use at your own risk.

The block is constructed of high purity copper that is electroplated to prevent oxidation. A high flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi block set ups.
Specifications

Compatibility

Parts Included

Warnings

This is a repair or replace only item. Returns not accepted on compatibility issues or block has had water/fluid run through it. Manufacturer reserves right to alter block design to expand compatibility. Delivered item may not 100% match pictured item. Product does NOT come with English instructions.
Tyler Direct is not responsible for any damage caused by or when using this product. Please use at your own risk.

Conclusion

By our suggestions above, we hope that you can found rx 580 water cooling block for you.Please don’t forget to share your experience by comment in this post. Thank you!