Best Heating Element Mounting

Maytag Dryer heating Element 35001247-MY Included Metalic Support, Coil Assembly. 5/16″ Terminal On Coil/Housing, JUST COIL use part number PN5300624005-MY replacement for brands: Kenmore Elite He 3t 4t 5t, Whirlpool Duet, KitchenAid, Maytag, GE, Amana, KitchenAid, Frigidaire, Sears Duet, Elite and more. Part may differ in appearance but is a functional equivalent and fit your product perfectly, any parts are a manufacturer substitution for ten or more part numbers, we get last one manufacturer substitution authorized. Designed to fit your product perfectly , GUARANTEED. Stock Bin Number: 1DC47-00019A9

Part Number WB44X200 replaces TJ90CH44X200, CH44X200, 14200023, 3267, 454483, 458290, AH249424, CH44X160, EA249424, ERB44X200, PS249424, R0710083, RP44X160, RP44X200, TS44X160, TS44X200, WB44X0160, WB44X0200, WB44X160, WB44X200, WB44X200R, WB44X6200, YCH44X200. Made by GE/Hotpoint, approx. 13 1/4″ wide X 16 3/4″ long. GE Factory Part. GE brands include General Electric, Hotpoint, RCA, and others. GE also makes various appliance models for Sears / Kenmore. • GE’s electric range bake unit (model #: WB44X200) is a replacement part for ovens that are not producing heat. This model fits on numerous GE model ovens. • Electric range bake units are designed to create high temperatures in ovens. If little or no warmth is being created upon powering up your oven, bake units should be the first part to be checked for functionality. • GE’s electric range bake unit (model #: WB44X200) is designed for free standing electric ranges with screw-in terminals. Additionally, this particular models electric output and dimensions are as follows:• 3100 Watts / 240 Volts ; 2330Watts / 208 Volts• 13 ¼ “W x 20″D • WARNING: To avoid a risk of electrical shock, before replacing the bake heating element, you must unplug the range or shut off the circuit breaker to the unit. To avoid a risk of burn, make sure that the range is off, and the unit’s heating element is cool to the touch.

 Replacement Oven Bake Element part number 44K5012. 

Replacement for GE part number WB44K10002. This broil element fits Range / Ovens made by General Electric including Hotpoint and RCA.

Specifications are: 13-1/2″ wide 16-1/2″ deep from the mounting bracket to the end of the element 2-5/8″ from mounting bracket to end of terminals 1-3/8″ apart are the terminals measuring center to center 2-5/8″ apart are the mounting holes on the metal bracket measuring center to center 3410 Watts at 240 Volts terminals are 1/4″ male spade.

Replacement for numbers AP2030962 and PS249236. Designed to fit specific General Electric Manufactured oven models.

Package includes:
1 * 3387747 Heating Element
1 * 279816 Thermostat Kit
1 * 3392519 Thermal Fuse

3387747 heating element fits later model electric clothes dryers and has 2 5/16″ terminals. Replaces part numbers 80003, 8527865, AP2947033, AP6008281, PS344597, and PS11741416.
3392519 thermal fuse part is a one-time use thermal fuse which attaches to the blower wheel housing of your clothes dryer. It cannot be re-set and must be replaced when continuity between the pins is no longer present. Terminal size is 3/16″. Replaces part numbers AP3132867, 2986, 3388651, 694511, 80005, AH345113, EA345113, ET401, PS345113.
279816 dryer thermal cut-off kit includes one high limit thermostat with a limit of 250 degrees Fahrenheit, and one thermal cut-off fuse (309 degrees). Replaces part numbers AP3094244, 2651, 3399848, 3977393, AH334299, EA334299, PS334299.
This kit also includes flat heaters with jumper wires.
All parts work with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Works with most top name brands: Whirlpool, Kenmore, Maytag, KitchenAid, Inglis.

Heater element 3387747 is fully assembled for easy installation.

Heavy Duty with mounting stabilizers.

Replacement for numbers 3387747, 8527865, AP2947033, AP6008281, PS11741416, and PS344597.

Siwdoy Customer Service

Siwdoy is committed to providing each customer best customer service. if any question ,Please don’t hesitate to contact us.

The instructions work for most Samsung dryers, some may have some small differences. Here is how to replace the DC97-14486A heating element:

STEP1: Shut off the power to the dryer before working on it.
STEP2: Remove the two screws securing the top panel to the back of the dryer. Slide the top panel towards the back of the dryer to remove. You will need to remove the front control panel, some model have screws securing this. Remove them and pull up to remove, you should have enough extra wire to set the control panel on top of the dryer to get it out of the way. if not, then disconnect the wires and set it off to the side. Behind where the control panel was there will be four screws that secure the front panel of the dryer to the frame. Remove these four screws.
STEP3: Open the door of the dryer, there will be two screws that need to be removed at the bottom of the door frame area. With those two screws removed you should be able to tilt the front panel forward, remove the connector to the door switch, and remove the front panel.
STEP4: The heating element is located on the bottom right side of the dryer. To remove the element you will need to remove the wires to the heating element, thermal fuse, and thermostat. Then remove the mounting screw in the front and the whole heating element assembly should pull out the front of the dryer.
STEP5:To re-install the heating element you will need to put everything back in the reverse order. To test the heating element, you will need an Ohm meter or multi-meter. A good heating element should read approximately 9-10 ohms. A burned out element will have an infinite resistance, it won’t register anything.

HydroQuip 5.5KW, 240 Volt Flo-Thru Universal Heating Element with Mounting Hardware for Swimming Pools or Spas Electric Heaters

Conclusion

By our suggestions above, we hope that you can found heating element mounting for you.Please don’t forget to share your experience by comment in this post. Thank you!