Top 9 Bosch 10 Inch Sliding Compound Miter Saw

The innovation responsible for both the unique appearance and the unparalleled level of performance is Bosch’s patented Axial-Glide system. Beyond giving the CM10GD its distinctive profile, Bosch’s Axial-Glide system eliminates three key challenges miter saw users have endured since the first slide systems debuted many years ago. While the traditional sliding compound miter saw approach enables users to make wider cross cuts, that system takes up more space and is prone to misalignment and stickiness over time. By replacing the sliding rail system with a hinged or articulating glide arm system – similar to the linkage used in a four-bar suspension design – Bosch created a more compact miter saw that delivers durable precision, remaining true and smooth over time. The Bosch CM10GD 10-Inch Dual Bevel Glide Miter Saw features a powerful 15-Amp, 4,000-RPM motor with large easy-to-read bevel and miter scales allowing for precise, quick and easy adjustments: 52-Degree Left/60-Degree Right Miter Capacity; 47-Degree Left/47-Degree Right Bevel Capacity with marked detents and roof pitch angles. The tall sliding 4-1/4-Inch fences allow for increased cutting capacity when cutting tall base and crown molding. With an ergonomic soft-grip ambidextrous trigger handle and a clear lower guard for unobstructed visibility throughout cut, the CM10GD provides maximum comfort for all-day use.

The DEWALT DWS779 12″ Sliding compound Miter saw features a powerful 15 amp, 3, 800 RPM motor that delivers extended power and durability. It has a super efficient dust collection system that captures over 75% of dust generated. This miter saw also offers an exclusive back fence design which cuts up to 2×16 dimensional lumber at 90° and 2×12 at 45°.

The Makita 12” dual-bevel sliding compound Miter saw with laser (model LS1219L) combines capacity, accuracy and efficient dust extraction in a more compact size, with a unique 2-steel rail sliding system that offers a reduced footprint for operation flush against a wall. The innovative direct-drive gearbox and guard system is engineered for increased vertical cutting capacity of baseboard (6-3/4”) and crown molding (8” nested). it will also make 15” crosscuts at 90 degrees. The saw miters 0° to 60° left and right, with positive stops at 0°, 15°, 22.5°, 31.6°, 45° and 60° (left or right). the bevel Lock is located in the front of the saw for easy access and Quick adjustments from 0° to 48° (left and right). the saw is powered by a 15 amp direct drive motor with soft start, a key point of difference. Direct drive enables smoother start-ups and consistent, Constant power with No belts to slip or replace. The Electric brake provides added convenience. In addition, the electronic speed control maintains Constant speed under load for smoother, higher-quality cutting. Additional features include a high-quality 60T carbide-tipped blade, and a see-through blade guard system for greater visibility of the blade and line-of-cut. The built-in laser indicates the line-of-cut whether the blade is turning or not, and offers micro-adjustments for precise “left-of-blade” or “right-of-blade” cutting. It has dual dust Collection ports for improved dust Collection capability for use with a bag (included) or vacuum (sold separately). it also has a large-sized aluminum base that improves the stability of cutting stock for more efficient cutting.

The Bosch CM8S 8-inch single bevel sliding compound Miter saw features a Bosch exclusive design delivering a well-balanced saw with a top carry handle at the center of gravity and weighing only 37 lbs., These features easily provide one-handed portability on and off the job. Accessible controls make it easy to change bevel settings without reaching behind the saw. The integrated expanding work piece supports, large easy to read Miter and bevel scales and detent system provides quick and accurate cuts. Uniform marks from 52-degrees left to 60-degrees right with 10 adjustable Miter detents set at most common cuts. The CM8S also has the same crosscut capacity (12-3/4-inch) as a 10-inch Miter saw, at 30-Percent the weight.

The Makita 10” dual-bevel sliding compound Miter saw with laser (model LS1019L) delivers large cutting capacity and accuracy right out of the box. With the LS1019L, you’ll get all the cutting performance you need in a slide compound saw, but with the most compact size in the Category for increased portability. With up to 6-5/8” capacity (crown molding, nested) jobs like cutting baseboards and crown molding are a snap, but with up to 4-3/4” baseboard, capacity, it can cut 4×4 dimensional lumber in one pass. It’s ideal for fine woodworking, carpentry, general construction, and more. The LS1019L is powered by a 15 amp direct drive motor with soft start, a key point of difference. This means smoother start-ups and consistent, Constant power with No belts to slip or replace. The Electric brake provides added convenience. The LS1019L will tackle the most demanding jobs while keeping production high.

Product Description

This thin kerf industrial blade provides a superior finish cut with sliding compound miter saws. The 5° negative hook angle helps prevent the blade from being too aggressive and pushes the work piece down and towards the fence. Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results..

Amazon.com

Ideal for use with sliding compound miter saws and radial arm saws, the 12-inch Freud LU91R012 Thin Kerf Sliding Compound Miter Saw Blade offers easy feeding, reduced waste, and the ability to achieve fine finishes with underpowered saws. It features 72 teeth with alternating top bevels and TiCo high-density carbide tips, negative hook angles for maximum control, and Freud’s insulating, Perma-SHIELD coating.

LU91R012 Thin Kerf Sliding Compound Miter Saw Blade At a Glance: Ideal for crosscutting materials 1/2 to 2-3/4 inches thick Heavy-duty plate with laser-cut, anti-vibration slots Tough Perma-SHIELD coating reduces friction and heat buildup Technical Specs: Coating Perma-SHIELD Diameter 12″ Teeth 72 ATB Arbor 1″ Kerf (K) .090 Plate (P) .071

Depth of Cut

Negative Hook Angle minimizes climbing for better control Thin Kerf requires less power and allows for faster feed rate

Negative Hook Angle for Fine Finishes with Sliding Miter Saws
This thin-kerf blade’s 72-tooth alternating-top-bevel (ATB) configuration features teeth that face both left and right. The blade’s teeth also feature five-degree, negative hook angles, which helps prevent the blade from being too aggressive. This configuration also works to push your work piece down and towards the fence of your saw for smooth, accurate feeding. And because thin-kerf blades remove less material than standard carbide blades, they require less horsepower to produce smooth, accurate results when cutting.

This blade is designed for optimal performance when crosscutting wood that is 1/2 to 2-3/4 inches thick, and it also performs well in laminate. This blade can also rip wood or be used with chipboard and plywood, and it can tackle thinner or thicker materials. However, some loss of surface finish may occur when it is used outside its ideal range. It has a 1-inch arbor and produces a 0.090 kerf.

Well-Balanced, Anti-Vibration Design
This Freud blade is precision balanced and pretensioned for truer cuts under heavy loads. It also features laser-cut, anti-vibration slots that reduce chatter for a cleaner finish, longer blade life, and reduced noise while you work. And because the entire blade is laser cut from high-strength steel, you can trust that it will stay stable, flat, and true, even after prolonged use. Furthermore, this well-balanced, anti-vibration design means there’s no need to use add-on stabilizers with this blade.

High-Density Carbide for Maximum Cutting Performance
This thin-kerf saw blade’s 72 teeth are finished with tips made from Freud’s application-specific TiCo high-density carbide “crosscut blend.” Formulated to help the blade maintain a sharp cutting edge in the face of demanding crosscut applications, this blend is extra hard–due to including more high-density tungsten carbide than other TiCo blends–and it still offers the full mix of improved corrosion resistance, heat resistance, and impact resistance that you expect from TiCo.

With teeth that start out sharper and deliver improved edge retention, the blade can go longer between sharpening, and will hold up longer–saving you time and money.

Perma-SHIELD Coating Reduces Friction and Heat Buildup
Built to withstand tough use in less-than-ideal conditions, this blade is finished with Freud’s red Perma-SHIELD–a non-stick coating that reduces friction and nearly eliminates the heat buildup that excess friction can cause. By providing complete thermal insulation, this coating protects your tools and your work surface. And it resists binding when the blade is used for large-volume cutting applications, which reduces blade warp.

As a lubricating feature, Perma-SHIELD allows the blade to spin freely while reducing stress on the motor and carriage of your saw. In addition, this coating helps prevent debris collection and resin or “pitch” buildup. Since gummy pitch buildup causes extra drag on the motor of your saw, less buildup is another little convenience that translates into longer tool life and longer blade life. It also means less downtime for blade cleaning, so you get jobs done faster.

This industrial saw blade is backed by Freud’s limited lifetime warranty.

About Freud: A History of Innovative Manufacturing
An industry leader for more than 50 years, Freud America, Inc. is a manufacturer and marketer of superior carbide cutting tools for the woodworking industry. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain Carbide with Titanium, called TiCo, a high-density combination of Titanium and Cobalt.

By producing their own carbide, Freud has the unique ability to formulate each tool for each specific application, thereby maximizing the cutting life and performance of the tool. Freud’s full line of high-quality, woodworking tools includes saw blades, router bits, shaper cutters, power tools, and more.

What’s in the Box
Freud LU91R012 Thin Kerf Sliding Miter Saw Blade–12-inch diameter, 1-inch arbor, 72-tooth design.

See all Product description

The C8FSHES features Metabo HPT laser marker for cutting accuracy, an adjustable LED work light, and a best-in-class dust Collection system. Lightweight at only 32 lbs. , the C8FSHES 8-1/2″ Sliding compound Miter saw is ideal for trim carpenters, framers and woodworkers who demand precision, reliability, and mobility.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Bosch 10 Inch Sliding Compound Miter Saw, eg:

• What are Top 10 Bosch 10 Inch Sliding Compound Miter Saw for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Bosch 10 Inch Sliding Compound Miter Saw to buy?
• What are Top Rated Bosch 10 Inch Sliding Compound Miter Saw to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Bosch 10 Inch Sliding Compound Miter Saw?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Bosch 10 Inch Sliding Compound Miter Saw.
• Before deciding to buy any Bosch 10 Inch Sliding Compound Miter Saw, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Bosch 10 Inch Sliding Compound Miter Saw and What you should consider when buying the Bosch 10 Inch Sliding Compound Miter Saw and Where to Buy or Purchase the Bosch 10 Inch Sliding Compound Miter Saw. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Bosch 10 Inch Sliding Compound Miter Saw of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Bosch 10 Inch Sliding Compound Miter Saw.