The 4 Best Computer Cooling Water Pump

Description:

– Model:SC-300T
– Flow:max 300L/h
– Head:max 1.9 meters
– Power Connector: Small 3P connector
– Voltage:DC12V
– Power: 4W
– Water tank capacity: 150ml
– Noise:23DB
– Dimensions:Length 66mm * wide 56mm * height 86mm (net size, excluding out of faucets, shock absorber)
– Tap Diameter:9.4 mm

Features:

– LED power indicator to indicate power-on state
– Control circuit,the pump is more stable
– Tap out the instructions marked
– Small 3P power connector can be directly plugged into the headboard fan original position
– Support speed testing function
– With rubber shock absorber base,ultra-quiet experience.（Tips:It is good to use the pipe with 8MM inner diameter）

Package included:

– 1pcs ultra-quiet Water pump

LENX SC600 DC 12V PC Cpu Water Cooling System Tool Water Pump 132.09 GPH 10W Brushless Drive Water pump for Destop Computer Laptop computer

Specifications:
Power consumption:10W
Rated voltage: DC 12V
Rated current: 0.8A
Max flow rate: 500L/H (132.09G/H)
Max static head: 3m (9.8ft)
Diameter of inlet:Female G 1/4″
Diameter of outlet:Female G 1/4″
Lifespan: More than 50,000hrs
Power supply: DC electric source
Ceramic shaft + ceramic bushing
Speed:3000 RPM
Size:length 9 cm, height 8 cm, width 6cm.

NOTE:

1. Working at rated voltage (DC12V/0.8A). The positive pole is red wire, the negative pole is black wire,white wire is test wire.
2. This pump is centrifugal pump, it can’t vent the air automatically, so it must be operated by submersible installation. (If outside water installation, you should make sure it is installed below the liquid surface)
3. When blocking, long-running is not allowed.
4. Preventing any hard particles entering the pumps.
5. Ceramic bearing, graphite sleeve, very quiet, when using anhydrous idling is forbidden

Package:
1 X Water pump

DC 12V 10W, perfect for CPU cooling system.

G 1/4 inch input and output.

High efficiency, low consumption, low noise.

High head, high flow.

Permanent magnetic rotor.

The axis is enclosed with static sealing, not dynamic, which can avoid leaking problems.

NOTE:

1. Working at rated voltage (DC12V/10W).
2. This pump is centrifugal pump, it can not vent the air automatically, so it must be operated by submersible installation. (If outside water installation, you should make sure it is installed below the liquid surface)
3. When blocking, long-running is not allowed.
4. Preventing any hard particles entering the pumps.

Thermaltake Pacific DIY LCS PR22-D5 300ml 5-Speed Adjustable D5 Pump/Reservoir Combo 3-Port G 1/4″ Thread Tt LCS Certified POM PMMA CL-W082-PL00BL-A

Thermaltake launches the Pacific PR Series tube reservoir and D5 pump for the ultimate in custom PC water cooling configurations. Featuring exceptional performance and unrivalled reliability, the PR22-D5 is manufactured from high quality POM and PMMA material to provide a crystal clear, high performance, durable solution. By giving users ideal mounting, fitting and flow, the PR22-D5 is the right choice for PC enthusiasts. Make your system a showcase for all to see with the Thermaltake Pacific PR Series.

Key Features:

• Featuring 6mm thick of the pipe wall, which can sustain the maximum pressure up to 99 PSI (Pounds per square inch).
• Heat-Resistant Acrylic Tank: Made of reliable, light weighted POM and PMMA construction, which is crystal clear and highly durable. High quality acrylic (PMMA) tube maximum working temperature: 131°F
• G ¼” Thread Ports

Specification:

• 1mm (L) x 78mm (W) x 309.7mm (H)
• Material: POM + PMMA
• Capacity: 300ml
• Maximum Head: 15 Feet
• Maximum Flow Rate: 1135 L/Hr
• Maximum Pressure: 50 PSI
• Connector: 4 Pin
• Pump Speed: 1800, 2550, 3300, 4050, 4800 RPM
• G ¼”

Support 
Please visit our website or search “Thermaltake Support” for any assistance.

Conclusion

By our suggestions above, we hope that you can found computer cooling water pump for you.Please don’t forget to share your experience by comment in this post. Thank you!