rinstips 
Nowadays, there are so many products of dual extruder mount bar aluminum cooling block in the market and you are wondering to choose a best one. You have searched for dual extruder mount bar aluminum cooling block in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings dual extruder mount bar aluminum cooling block which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
INBBOX MK8 Extruder Hotend for MakerBot Prusa i3 Reprap DIY 3D Printer-All Metal Assembled-.4mm Nozzle Print Head
- ★HIGH QUALITY: 42mm NEMA 17 high quality stepper motor with high torque and less heat buildup.
- ☆EASY TO INSTALL:assembled MK8 extruder.
- ★WIDELY USED: It is compatible with most prusa i3 3d printers with some slight modifications when mounting it.（Anet A8,3D Printer Upgrade）.
- ☆SAFETY: Ceramic insulation cotton ensure the hotend can heat to a high temperature fast and stably.
- ★100% MONEY BACK : Contact us if you are not satisfied with it. We’ll process full refund or send you a replacement without returning or any additional conditions. All issues will be solved within 24 hours.
#1MK8 Extruder High Quality for 3D printer (Upgrade, MakerBot Prusa i3 Reprap DIY 3D Printer)
NOTE:
*Make sure the maximum temperature is less than 280°C.
*Thermistor sensor is risky damaged if it is fasten too tight. And please do not be panic if it is fallen out as arrived ,it is easy to reset.
*Compatible with most prusa 3d printers with some slight modifications, if you would like to install on Anet A8,please cut the thumb bar of the extruder frame for carriage mounting.
Specification:
Default extrusion nozzle: come with 0.4mm nozzle
The material of Print: 1.75mm PLA/ABS/Wood/Flexible
Operating temperature Normal: 190-250 ℃
Throat: M6 X 30mm
The voltage of heating nozzle: 12V
Cartridge heater: 12V,40W, 1 meter lead
Thermistor: 100K NTC, 1 meter lead
Cooling fan: 12V 4010 fan
Stepper motor wire: 1 meter
The flow rate of Nozzle: about 24cc / h
Sports shaft speed: 40mm/s
Net weight: 450g
Stepper Motor: Nema 17 Stepper Motor, 4 Wires
Number of Phase: 2
Step Angle: 1.8 deg
Rate Voltage: 3.3V DC
Holding Torque: 1.5A
Phase Resistance: 2.2ohms±10%（20℃）
Motor Torque: 40Ncm/57.1 oz.in
Phase Inductance: 3.8mH±20%(1KHz)
Package Include:
1xMK8 Extruder(0.4mm nozzle)
1 x1 Meter stepper motor wire
1 x0.4mm nozzle cleaner
Scroll up and Click Add to Cart for your 3D Printer Bro!
Dual Extruder Throat Aluminum Mount Heating Nozzle Block Fits for CTC/Makerbot
Specification:
Product name: Fits For CTC/Makerbot Dual Extruder Throat Aluminum Mount Heating Nozzle Block
Size: 87x16x13mm
Material: aluminum
Nozzle type: two heads
Polished surface
Package Including:
Fits For CTC/Makerbot Dual Extruder Throat Aluminum Mount Heating Nozzle Block x 1pcs
DIYhz Aluminum Water Cooling Block, Liquid Water Cooler Heat Sink System for PC Computer CPU Graphics Radiator Heatsink Endothermic Head Silver 2pcs(40mm x 80mm x 12mm)
- ★ Water cooling block size: 40 x 80 x 12mm
- Material: aluminum alloy.
- ★ The surface of the water cooling block is polished, the inner flow channel is extruded into an M-shaped flow channel, brazing parts into a whole.
- ★ The pagoda nozzle has a minimum outer diameter of 7mm and can be connected to an inner diameter of 7-8mm Water pipe.
- ★ This water cooling block applicable to computer CPU, graphics gpu heat, motherboard, xbox consoles cpu, graphics, semiconductor cooling piece, industrial inverter driver, laser head cooling and industrial control cabinet cooling.
- ★ Package Content: 2 x Aluminum Water Cooling Block.
Aluminum Water Cooling Block:
Specifications:
– Product Size: 40 x 80 x 12mm
– Processing: Vacuum Aluminum Brazing
– Polishing working surface and better heat absorption
Features:
❃ The internal flow channel is extruded into an M-shaped flow channel to maximize the hot and cold exchange area.
❃ The pagoda nozzle has a minimum outer diameter of 7mm and can be connected to an inner diameter of 7-8mm Water pipe.
❃ Applicable to computer CPU, graphics gpu heat, motherboard, xbox consoles cpu, graphics, semiconductor cooling piece, industrial inverter driver, laser head cooling and industrial control cabinet cooling.
Package Content:
2 X CPU Water Cooling Block
DIYhz Aluminum Water Cooling Block, Liquid Water Cooler Heat Sink System for PC Computer CPU Graphics Radiator Heatsink Endothermic Head Silver 2pcs(40mm x 40mm x 12mm)
- ★ Water cooling block size: 40 x 40 x 12mm
- Material: aluminum alloy.
- ★ The surface of the water cooling block is polished, the inner flow channel is extruded into an M-shaped flow channel, brazing parts into a whole.
- ★ The pagoda nozzle has a minimum outer diameter of 7mm and can be connected to an inner diameter of 7-8mm Water pipe.
- ★ This water cooling block applicable to computer CPU, graphics gpu heat, motherboard, xbox consoles cpu, graphics, semiconductor cooling piece, industrial inverter driver, laser head cooling and industrial control cabinet cooling.
- ★ Package Content: 2 x Aluminum Water Cooling Block.
Aluminum Water Cooling Block:
Specifications:
– Product Size: 40 x 40 x 12mm
– Processing: Vacuum Aluminum Brazing
– Polishing working surface and better heat absorption
Features:
❃ The internal flow channel is extruded into an M-shaped flow channel to maximize the hot and cold exchange area.
❃ The pagoda nozzle has a minimum outer diameter of 7mm and can be connected to an inner diameter of 7-8mm Water pipe.
❃ Applicable to computer CPU, graphics gpu heat, motherboard, xbox consoles cpu, graphics, semiconductor cooling piece, industrial inverter driver, laser head cooling and industrial control cabinet cooling.
Package Content:
2 X CPU Water Cooling Block
MooMmax Aluminum Water Cooling Block 41122 Purple Water Cooling Heatsink Block Waterblock Liquid Cooler Support CPU
- Brand new and high quality!
- The external diameter of the connector is 9.5mm，The inner diameter of the connector is 6-8mm.
- The inner diameter of the connector is 6-8mm，Internal flow channel extrusion forming.
- Leak rate of less than 5X10-6 mbar.l/s parts，Internal fin thickness 0.5mm.
- Applicable to computer CPU water, industrial inverter driver, laser head cooling, industrial control cabinet cooling.
Features:
Brand new and high quality
The external diameter of the connector is 9.5mm
The inner diameter of the connector is 6-8mm
Internal flow channel extrusion forming
Brazing parts into a whole
Leak rate of less than 5X10-6 mbar.l/s parts
Internal fin thickness 0.5mm
Applicable to computer CPU water, industrial inverter driver, laser head cooling, industrial control cabinet cooling
Product properties:
Brand Name: None
Model Number: None
Type: Water Cooling
Heatsink Material: Aluminum
Application: Processor
Noise: QUIET
Package: No
Specifications:
Size: 41 x 122 x 12mm
Spacing: 1mm
Processing: Vacuum aluminum brazing
Surface treatment: Purple oxidation
Package Includes: 1 x Water Cooling Heatsink Block Liquid Cooler
Usongshine Bowden Extruder BMG extruder Cloned Btech Dual Drive Extruder for 3D Printer High Performance CR10 MK8
- BMG extruders are suitable for a wide range of materials , from nylon and soft TPU/TPE. Suitable for 1.75mm Filament.It is compatible with many printers on the market (For CR-10, For Ender3, etc.)
- The unique Dual-Drive technology delivers uninterrupted material flow without fear of grinding or slipping in even the most demanding conditions.
- The BMG utilizes an internal gearing ratio of 3:1 together with precision cnc-machined hardened steel drive gears to give you a compact powerhouse for all your applications.
- The tightening spring arrangement allows fine adjustment of the pressure applied by the feed dual drive gear to the consumable. The tightness can be adjusted freely according to the characteristics of the consumables.
- The reduction gear unit also imparts greater torque to the extrusion, while reducing the burden on the motor and extending the life of the motor.
HEASEN Flashforge Extruder Assembly to Creator Pro Bar Mount Assembly for Flashforge Creator Pro 3D Printer
Zamtac Replicator 2 3D Printer MK8 Single extruder Bar Mount hotend bar Aluminum Alloy Metal Bar Mount Heater Block
This is for Makerbot Replicator 2 3D printer single extruder
.
Item specifics:
Item type: Heated Block
Flexion Retrofit Kit for Dual Extruder (Flashforge Creator Pro and Others)
The Flexion Extruder upgrade for single-extruder printers will drastically improve your prints, especially with flexible filament. The extruder uses precision-machined metal components to apply adjustable, precise tension on the filament to convert the rotation of the motor to axial filament movement much more reliably than your stock extruder. The filament path is better supported than any other extruder, and is optimized for flexible filaments. The Flexion Extruder allows printing down to 60 Shore A durometer material – softer than anything on the market today. This model is a drop-in replacement for Flashforge Creator Pro, QiDi Tech, PowerSpec Ultra, Wanhao Duplicator 4S, and others.
3D Printer Repairing Dual Head Extruder Mount Plate Fixed Bracket for MK8
Description:
– 100% new and high quality.
– Hard Steel material,durable and portable.
– Motor mounting fixed bracket.
Package Includes:
1x Double Head Motor Mount Bracket
Conclusion
By our suggestions above, we hope that you can found dual extruder mount bar aluminum cooling block for you.Please don’t forget to share your experience by comment in this post. Thank you!
