Which Is The Best Gas Hot Water Heater Installation Kit

The Eastman 048280 Gas Water Heater Installation Kit is a complete package which consists of 2 corrugated stainless steel flexible water heater connectors with corrosion resistance properties. It also includes a 24-inch gas connector which is made of sturdy corrugated stainless steel and has a yellow epoxy coating. It contains 2 compression adapters for a solder-free connection. The package consists of a roll of sealing Teflon tape which makes installation easy. This kit has a 1-year limited warranty. EASTMAN’s certified appliance connectors are a premium quality that provides a reliable installation every time. This water heater installation kit is used to install a new gas water heater or replace the existing connectors. Use this kit for reliable installation.

Product Description

Features ENERGY STAR Qualified Energy Factor of .82 for Natural Gas and Propane Certified for Installation in Manufactured (Mobile) Homes Leak detection shuts off water to unit to limit property damage Enhanced scale detection lessens possibility of serious, long-term damage to unit Temperature lock prevents accidental or unauthorized changes to water temperature Complies with South Coast Air Quality Management District 14 ng/J or 20 ppm NOx emission levels Rinnai Value Series Tankless Water Heater Product Warranty Dimensions Width: 14 Inches Height: 23 Inches Depth: 9 Inches Weight 45.6 Pounds Ignition Direct Electronic Hot Water Capacity 0.26 to 6.6 GPM Minimum Activation Rate 0.4 GPM Minimum/Maximum Gas Rate (Input BTUs ) 10,300 150,000 Energy Factor 0.82 for Natural Gas and Propane Energy Star Yes Approved Gas Types Natural Gas or Propane Temperature Settings 98F – 140F with MC-91-2US 98F – 160F with MCC-91-2US Type of Controller MC-91-2US (included) MCC-91-2US (optional for Hydronic Applications) MC-100V-1US Deluxe Controller (optional) BC-100V-1US Bathroom Controller (optional) Ultra Lox NOx Yes Electrical AC 120 Volts, 60 Hz Electrical Consumption Normal: 76 Watts Standby: 2 Watts Anti-Frost Protection: 120 Watts Service Connections Gas Supply: 3/4 Inch MNPT Cold Water Inlet: 3/4 Inch MNPT Hot Water Outlet: 3/4 Inch MNPT. Turn off gas supply and 120 V power supply

From the Manufacturer

Features ENERGY STAR Qualified Energy Factor of .82 for Natural Gas and Propane Certified for Installation in Manufactured (Mobile) Homes Leak detection shuts off water to unit to limit property damage Enhanced scale detection lessens possibility of serious, long-term damage to unit Temperature lock prevents accidental or unauthorized changes to water temperature Complies with South Coast Air Quality Management District 14 ng/J or 20 ppm NOx emission levels Rinnai Value Series Tankless Water Heater Product Warranty Dimensions Width: 14 Inches Height: 23 Inches Depth: 9 Inches Weight 45.6 Pounds Ignition Direct Electronic Hot Water Capacity 0.26 to 6.6 GPM Minimum Activation Rate 0.4 GPM Minimum/Maximum Gas Rate (Input BTUs ) 10,300 150,000 Energy Factor 0.82 for Natural Gas and Propane Energy Star Yes Approved Gas Types Natural Gas or Propane Temperature Settings 98F – 140F with MC-91-2US 98F – 160F with MCC-91-2US Type of Controller MC-91-2US (included) MCC-91-2US (optional for Hydronic Applications) MC-100V-1US Deluxe Controller (optional) BC-100V-1US Bathroom Controller (optional) Ultra Lox NOx Yes Electrical AC 120 Volts, 60 Hz Electrical Consumption Normal: 76 Watts Standby: 2 Watts Anti-Frost Protection: 120 Watts Service Connections Gas Supply: 3/4 Inch MNPT Cold Water Inlet: 3/4 Inch MNPT Hot Water Outlet: 3/4 Inch MNPT

• INCLUDES: (1) Cold side 18″ Corrugated Stainless Steel Flex Hose with 3/4″ Ball Valve, (1) Hot side 18″ Corrugated Stainless Steel Flex Hose, (1) 3/4″ Disconnect Clip, and (1) Push-Fit Installation Tips.
• Water Heater connection ends are 3/4″ FIP for 1″ OD water heater pipe, and Supply Line end s are 3/4″ Push-Fit for 7/8″ OD supply connection.
• Integral tube liner for PEX installations which means no loose connections.
• Made of Lead Free DZR (dezincification resistant) brass which provides a strong, durable fitting that is corrosion resistant.
• It’s the easiest way to join copper, CPVC or PEX pipe in any combination. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. These fittings are lead free and meet all requirements for plumbing in California and Vermont.
• Lifetime Warranty.

Helpful Hints:
Do not attempt to insert the tubing into the stiffener while the stiffener is inside the fitting because the stiffener will not properly seat into the PEX. Remove the stiffener (using the disconnect clip and needle-nose pliers), and insert it into the PEX and then insert the PEX into the fitting. (Most people get a water tight seal without the stiffener so they elect not to use it.)

Complete kit: 2 brass nipples (3/4″), 1 gas line hose 3/4″ flip x 3/4″ flip x 24″, 2 water line hoses: 3/4″ flip x 3/4″ flip x 18″: .

Product Description

Our high-efficiency plus RL models, offer Rinnai’s most advanced technology in non-condensing tankless water heaters. You’ll enjoy the endless hot water and energy savings you expect, with the addition of Wi-Fi monitoring and recirculation technology for faster hot water delivery.

From the Manufacturer

The R94LSi lets you enjoy continuous hot water for up to five plumbing and appliance outlets simultaneously and always at a consistent, pre-set temperature. With a capacity of up to 9.4 gallons of hot water per minute (GPM), the R94LSi still delivers up to 40% energy savings and significant space savings. This compact, interior-mount unit vents directly to the outside with a concentric venting system.

Product Description

Electric water heater installation kit, includes: two 15″ flexible water connectors, two 3/4″, 2″ long pipe nipples, two 3/4″ pipe connectors, two 1/2″ pipe connectors, two 3/4″ x 1/2″ REDUCER bushings, one 5′ roll of Teflon tape, 1 wire clamp & 2 wire nuts. This product adds a great value. Product is highly durable and very easy to use. This product is manufactured in china.

From the Manufacturer

Electric water heater installation kits include all connectors, fittings, nipples and teflon tape for installation of a electric water heater.

Water heaters parameter：

Gas type: Liquefied Petroleum Gas 

Water flow rate: 6 L/min

Power: 12KW

Rate gas pressure: 2000 Pa

Suitable Water Pressure: 0.02-1.0MPa

Ignition mode: 2 qualified 1.5V batteries (No included batteries).

Gas Pipes：1/2” iron thread

WARM TIPS

1.This type of water heater needs to be installed outside the bathroom.

2. Different gas sources must use specific water heaters, which cannot be mixed with each other, and cannot be modified privately.

3.In order to prevent be scalded, firstly we should check the water temperature with hand whether it is suitable for washing or bathing.

4. Inlet/exhaust pipes are in high temperature when used. In order to prevent be scalded, do not touch them with your hands, especially in families with children.

DAILY MAINTENANCE

Pay attention to whether there is water leakage in the water heater and find that it should be disposed of in time.

The Liquefied Petroleum Gas must be turned off if the water heater do not need to be used for a long time. Meanwhile,the flue machine should remove the battery.

And open the anti-freeze device to drain the water. 

Kozyard Tankless water heater valves are designed to simplify the installation and maintenance of tankless water heaters. Available in two valve sets for both hot and cold water with 3/4-inch female threaded union brass fittings, Pressure Relief Valve is included as well. It designed for efficiently and effectively flushing out any possible mineral scale build-up, periodically flushing out our tankless water heater easily.

Product Description

Webstone service valves. Includes relief valve. These hot and cold water service valves simplify installation and service by combining multiple valves and connections in a single part. Clean Brass for California Low Lead Code. Includes: Tankless Service Clean Brass Valve Kit with Relief Valve.

From the Manufacturer

Webstone service valves. Includes relief valve. These hot and cold water service valves simplify installation and service by combining multiple valves and connections in a single part. Clean Brass for California Low Lead Code. Includes: Tankless Service Clean Brass Valve Kit with Relief Valve

Conclusion

By our suggestions above, we hope that you can found gas hot water heater installation kit for you.Please don’t forget to share your experience by comment in this post. Thank you!