Which Is The Best Gpu Cooling Block 1060

Note: Please be sure to contact us before purchasing. Because there are several versions of the sapphire graphics card, our domestic sapphire graphics card version is completely different from the foreign sapphire graphics card version. If you do not contact us before purchase, it will easily lead to GPU BLOCK not compatible with your graphics card, thank you.
100% new, fine workmanship, simple sense is very strong!
Bykski A-SP58PLAT-X for Pcasl Sapphire RX580 Graphics design,please confirm before buying graphics specific specifications, to ensure the compatibility of water cooling block.
Water cooling block is designed using 0.2 MM micro channel injection, all designed for performance! Core (GPU), direct cooling graphics memory (RAM), as well as the graphics card power supply (VRM) these hot key parts of the graphics card, to ensure that the players and the stability of the overclocking, maintain a good temperature.
Graphics using large water flow design, even if the hm weaker pump can meet the demand.
Water cooling block at the bottom of the use of high purity copper manufacturing, and electroplating processing to prevent oxidation, more make water head of delicate and beautiful. Cover the use of high-quality POM material or imported acrylic materials, ensure the service life of water head and durability. Sealing material using a high standard of sealing ring resistance to ageing of fatigue, ensure the sealing water cooling block.
Video card water cooling block is free to change direction, convenient players form a SLI&CF firefight system, can be in series or in parallel.
parts list:
fast twist X 2
plugs X 2
thermal paste X 1
mounting screws X 1
With RGB LED X 1
Compatible graphics card type: Sapphire RX580 8G D5
Compatible graphics card type: Sapphire RX580 8G D5 OC
Compatible graphics card type: Sapphire RX580 4G D5 OC

The Thermosphere cooling engine uses similar, yet refined as per needs of modern microprocessors, fin design as its ancestor. The cooling liquid accelerates through jet plate’s nozzle and turbulently continues its path through numerous very thin channels which provide extreme cooling surface area. EK-Thermosphere can also work flawlessly with reversed water flow which does not affect the cooling performance. Base is made of nickel plated electrolytic copper, backbone is made from laser cut brushed stainless steel plate while the top is made of quality cast acrylic material. The sealing is ensured by quality rubber washers. Screw-in brass standoffs are pre-installed in each exchangeable mounting plate and allow for safe, painless installation procedure. Block is mounted with enclosed M3x4 DIN7985 screws. G1/4″ threaded fittings can be used on both sides of the FC terminal. Up to four EK-Thermosphere water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that EK-FC Bridge & Link system is not compatible with this water block. GPU compatibility: EK-Thermosphere series waterblocks supports majority of modern nVidia and AMD high-end graphics cards via exchangeable mounting plates. The product however comes factory pre-fitted with mounting plate G80 (mounting pattern 58x58mm) and ready for use on modern nVidia GeForce GTX graphics cards only. Please check compatibility at EK’s CoolingConfigurator. To use this product on AMD and other nVidia graphics cards it is mandatory to purchase additional mounting plates: – G92: 53x53mm – R600: 54x54mm – GF560: 51x61mm – G200: 61x61mm Enclosed in the box: – EK-Thermosphere series water block /w pre-installed G80 mounting plate – mounting mechanism – thermal grease (TIM) EK-Ectotherm (1g)

Quickly mount any Kraken Series liquid cooler onto graphics cards with the Kraken G12 mounting kit. It delivers a 40% increase in cooling capacity over stock cooling, and features a newly designed bracket with an easier installation process versus the Kraken G10. Plus, the G12 is compatible with more than 30 liquid coolers on the market.

Compatibility – Graphic Cards
Nvidia
Titan X, Titan, Geforce GTX 1080 Ti, 1080, 1070, 1060, 980 Ti, 980, 970, 960, 780 Ti, 780, 770, 760, 680, 670, 660Ti, 660, 580, 570
\AMD
RX 480, 470, R9 390X*, 390*, 380X*, 380, 290X*, 290*, 285*, 280X*, 280*, 270X, 270, R7 370, HD7970*, 7950*, 7870, 7850, 6970, 6950, 6870, 6850, 6790, 6770, 5870, 5850, 5830
* Some variations in AMD die height may require the use of a copper shim which is not included.

Compatibility – AIO Liquid Coolers
NZXT
Kraken X72, X62, X52, X42, X61, X41, X31, X60, X40

Corsair
H105, H110, H90, H75, H55, H50 (CW-906006-WW only)

Thermaltake
Water 3.0 Riing RGB 360, 280, 240, Red 280, 140,
Water 3.0 Ultimate, Extreme S, Extreme, Pro, Performer
Water 2.0 Extreme, Pro, Performer

Antec
KUHLER H2O 920V4, 620V4, 920, 620

Zalman
LQ-320, LQ-315, LQ-310

EK-FC1080 GTX Ti FTW3 RGB is a high-performance full-cover water block for EVGA GeForce GTX 1080 Ti FTW3 based graphics cards, based on NVIDIA Pascal architecture (GP102). The water block comes with pre-installed 4-pin 12V RGB LED strip. This water block directly cools the GPU, RAM, and VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it’s VRM to remain stable under high overclocks. EK-FC1080 GTX Ti FTW3 RGB water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. This kind of efficient cooling will allow your high-end graphics card to reach higher boost clocks, thus providing more performance during gaming or other GPU intense tasks. Moreover, such design offers great hydraulic performance allowing this product to be used in liquid cooling systems using weaker water pumps. The base of the block is CNC machined out of nickel-plated electrolytic copper while the top is CNC machined out of high-quality acrylic material. The sealing is ensured by quality rubber O-rings. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. This product is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 4-pin LED connector is to be aligned with the +12V marking on the RGB header. EKWB recommends the purchase of aesthetic retention backplate which improves the looks of your graphics cards and also provides some passive cooling to the circuit board VRM section. The EK-FC1080 GTX Ti FTW3 RGB water block is compatible with EK-FC1080 GTX Ti FTW3 Backplates and the factory EVGA backplate as well.

Model: 3830046996466

EK-FC GeForce GTX FE RGB is a high-performance full-cover water block for multiple NVIDIA GeForce GTX and Titan Pascal series graphics cards that comes with pre-installed 4-pin 12V RGB LED strip. This water block directly cools the GPU, RAM, and VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it’s VRM to remain stable under high overclocks. EK-FC GeForce GTX FE water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. This kind of efficient cooling will allow your high-end graphics card to reach higher boost clocks, thus providing more performance during gaming or other GPU intense tasks. Moreover, such design offers great hydraulic performance allowing this product to be used in liquid cooling systems using weaker water pumps. This product is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 4-pin LED connector is to be aligned with the +12V marking on the RGB header. You can easily remove the LED strip cover which is mounted with two screws to replace the LED strip with some other type LED strip. The base of the block is CNC machined out of nickel-plated electrolytic copper while the top is CNC machined out of high-quality acrylic material. The sealing is ensured by quality rubber O-rings. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure.See EKWB site for full video card compatibility list.

Model: 3830046995780

The glacier G1080 founders Edition is made from premium materials and finest standards of craftsmanship from Phanteks. From military standard Viton O-ring to the RGB LED lighting, all of our exceptionally high-quality materials are carefully selected. The water block features a nickel-plated copper cold plate, Acrylic top and sandblasted cover plates for an elegant look. Glacier G1080 founders Edition is a full cover water block. The G1080 founders Edition water block covers the entire PCB of the card allowing the graphics card and its VRM to remain cool and stable. The G1080 founders Edition water block has a 9mm copper base for higher level of heat dissipation and heat transfer. The sealing is ensured by DuPont Viton rubber washers. The military-grade Viton increase temperature capability and stands up to aggressive fluids. The Viton rubber washers offers ruggedness so seals and components resist damage during installation and use. The Viton retains sealing force to prevent leaks even after compression for long periods. Glacier G1080 founders Edition uses the same RGB connector as our Phanteks cases so installation will be a breeze. With the RGB control of our compatible Phanteks cases, the G1080 founders Edition can synchronize with the case. Use the included RGB adapter (ph-cb4rgb) and you can sync with motherboards’ that support the 4pin RGB header including the ROG aura/MSI mystic light. The water block features a connection terminal that has a significantly Reduced flow resistance for an outstanding cooling performance.

Conclusion

By our suggestions above, we hope that you can found gpu cooling block 1060 for you.Please don’t forget to share your experience by comment in this post. Thank you!