Which Is The Best Gtx 1080 Water Cooling Kit

EK-FC1080 GTX Ti FTW3 RGB is a high-performance full-cover water block for EVGA GeForce GTX 1080 Ti FTW3 based graphics cards, based on NVIDIA Pascal architecture (GP102). The water block comes with pre-installed 4-pin 12V RGB LED strip. This water block directly cools the GPU, RAM, and VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it’s VRM to remain stable under high overclocks. EK-FC1080 GTX Ti FTW3 RGB water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. This kind of efficient cooling will allow your high-end graphics card to reach higher boost clocks, thus providing more performance during gaming or other GPU intense tasks. Moreover, such design offers great hydraulic performance allowing this product to be used in liquid cooling systems using weaker water pumps. The base of the block is CNC machined out of nickel-plated electrolytic copper while the top is CNC machined out of high-quality acrylic material. The sealing is ensured by quality rubber O-rings. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. This product is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 4-pin LED connector is to be aligned with the +12V marking on the RGB header. EKWB recommends the purchase of aesthetic retention backplate which improves the looks of your graphics cards and also provides some passive cooling to the circuit board VRM section. The EK-FC1080 GTX Ti FTW3 RGB water block is compatible with EK-FC1080 GTX Ti FTW3 Backplates and the factory EVGA backplate as well.

Model: 3830046996466

Powered by GeForce GTX 1080 Ti and integrated with 11GB GDDR5X 352-bit memory interface. Featuring WINDFORCE Water block with advanced copper back plate cooling.

Backplate is just for showcase and it is not included! This product should NOT be installed with any aluminum Fluid Gaming parts EK-FC1080 GTX Ti TF6 is a high-performance full-cover water block for MSI GEFORCE GTX 1080 Ti based graphics cards, based on NVIDIA Pascal architecture (GP102). Please check our Cooling Configurator online compatibility system for detailed compatibility list! This water block directly cools the GPU, RAM, and VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it’s VRM to remain stable under high overclocks. EK-FC1080 GTX Ti TF6 water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. This kind of efficient cooling will allow your high-end graphics card to reach higher boost clocks, thus providing more performance during gaming or other GPU intense tasks. Moreover, such design offers great hydraulic performance allowing this product to be used in liquid cooling systems using weaker water pumps. The top also features two pre-drilled slots for 3mm diodes. The sealing is ensured by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. The factory backplate of the MSI GeForce GTX 1080 Ti Gaming 11G and MSI GeForce GTX 1080 Ti Gaming X 11G graphics cards is compatible with this water block. G1/4″ threaded fittings can be used on both sides of the FC terminal. Up to four EK-FC1080 GTX Ti TF6 water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that the old EK-FC Bridge & Link system is not compatible with this water block.

The GeForce GTX 1080 Ti is NVIDIA’s new flagship gaming GPU, based on the NVIDIA Pascal architecture. The latest addition to the ultimate gaming platform, this card is packed with extreme gaming horsepower, next-gen 11 Gbps GDDR5X memory, and a massive 11 GB frame buffer.

Specification:
Model: T128010SU
Voltage: DC 12V
Current: 0.35AMP
Fan Dimension (L x W x H): approx. 78mm x 78mm x 10mm (±2mm)
Mounting holes distance: approx. 40mm x 40mm x 40mm (Center to Center)
Power Connector: 4-Pin Header ​
Application:
For Gigabyte GTX 980 TI G1 gaming (GV-N98TG1 GAMING-6GD )
GTX 1060 G1 ROCK 6G (GV-N1060G1 ROCK-6GD)
AORUS GTX 1060 6G (GV-N1060AORUS-6GD)
AORUS GTX 1060 6G 9Gbps (GV-N1060AORUS-6GD)
GTX 1070 G1 Gaming 8G (GV-N1070G1 GAMING-8GD)
GTX 1070 G1 ROCK 8G (GV-N1070G1 ROCK-8GD)
GTX 1070 Ti Gaming 8G (GV-N107TGAMING-8GD)
GTX 1080 Ti Gaming OC BLACK 11G (GV-N108TGAMINGOC BLACK-11GD)
GTX 1080 Ti Gaming 11G
GTX 1080 WINDFORCE OC 8G
GTX 1080 G1 ROCK 8G
GTX 1080 G1 Gaming 8G

Thermaltake Pacific v-gtx 10 series founders Edition transparent water block is a full cover water block including an aluminum alloy back plate. Compatible with NVIDIA GeForce GTX 1080/1070 fe models, deliver the ultimate in cooling performance. Featuring 0.5mm internal fin construction, the Pacific v-gtx 10 series is manufactured with cnc machined copper base, nickel plating for ideal protection and supporting G1/4 threaded fittings. Included hardware supports users for easy installation. See the true power of liquid cooling with the Thermaltake Pacific GTX 10 series GPU water block.

EK-FC GeForce GTX FE is a high-performance full-cover water block for multiple NVIDIA GeForc GTX and Titan X (Pascal) based graphics cards. This water block directly cools the GPU, RAM, and VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it’s VRM to remain stable under high overclocks. EK-FC GeFroce GTX FE water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. This kind of efficient cooling will allow your high-end graphics card to reach higher boost clocks, thus providing more performance during gaming or other GPU intense tasks. Moreover, such design offers great hydraulic performance allowing this product to be used in liquid cooling systems using weaker water pumps. The base of the block is made of nickel-plated electrolytic copper while the top is made of quality acrylic material. The top also features two pre-drilled slots for 3mm LEDs. The sealing is ensured by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. The EK-FC GeForce GTX FE water block is backward compatible with all EK-FC1080 GTX Backplates, EK-FC1080 GTX Ti Backplates, and EK-FC Titan X Pascal Backplates. G1/4″ threaded fittings can be used on both sides of the FC terminal. Up to four EK-FC GeForce GTX FE water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that EK-FC Bridge & Link system is not compatible with this water block. The EK-FC GeForce GTX FE water block is compatible with all reference design GeForce GTX 1060, GeForce GTX 1070, GeForce GTX 1080, GeForce GTX 1080 Ti, GeForce Titan X Pascal and GeForce Titan Xp based graphics cards.

Model: 3831109831977

Conclusion

By our suggestions above, we hope that you can found gtx 1080 water cooling kit for you.Please don’t forget to share your experience by comment in this post. Thank you!