rinstips 
Nowadays, there are so many products of heating metal tape in the market and you are wondering to choose a best one. You have searched for heating metal tape in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings heating metal tape which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
3M 3311 Silver Aluminum Foil Tape – 2 in. x 5 yd. Vapor Resistant Rubber Adhesive Foil Tape Roll. Adhesives and Tapes
- Adhesive Tape: this foil tape with aggressive rubber adhesive sticks well to most surfaces. The vapor shielding tape also adheres to irregular surfaces, irrespective of the weather conditions
- Applications: the silver aluminum tape can be used for shielding, patching, seaming, and sealing to protect the materials from moisture, heat, odor, and chemical transmission. It is ideal for use in repair tasks
- Temperature Friendly: the odor resistant tape meets American UL-723 standards for flame spread and smoke. The rubber adhesive tape dissipates excess heat and ensures heating and cooling efficiency of sensitive materials
- Multipurpose Tape: this adhesive foil tape works suitably well in general, commercial, and industrial applications. It can be used for aluminum seams and joints, sheet metals, fibrous and metal ducts, and aluminum backed duct boards
- Specifications: this silver foil tape measures 2 in. in width, 5 yd. in length, and weighs 0.32 oz. The paper-lined tape can sustain -10 deg. – 180 deg. temperature
3M Silver Tape is backed with aluminum foil and rubber adhesive for sticking perfectly to the surfaces. The aluminum backed tape features a high-tack, pressure sensitive adhesive that bonds equally with regular, irregular, smooth and powder-painted surfaces. This silver tape is ideally used for patching and seaming tears in sheet metals, metal ducts, aluminum backed fiberglass and thermal insulation systems. Insulation tape has high heat reflectivity and thermal conductivity features to protect heat-sensitive apparatus from vermin, high and low temperatures, moisture, and fire smoke. The 5 yd. long and 2 in. wide heat-reflective tape can be used in all weather conditions.
3M Silver Foil Tape 3340, 2-1/2" x 50 yd, 4.0 mil
3M High Temperature Flue Tape, 15-Foot Roll
Product Description
3M High Temperature Flue Tape, 15-Foot Roll
From the Manufacturer
3M High-Temperature Flue Tape is easily installed around seams in hot air ducts. It stops hot air leaks and may be used on surfaces up to 600 degrees F (315 C). Measures 1-1/2 inch by 15 foot
Duck Brand HVAC Duct Sealing Tape, Silver, 1.88 Inches x 30 Yards, 1 Roll (1404523)
- Heavy-duty tape that works on both rigid and flexible ductwork
- Easy to tear and UL181A-P listed
- For use with a temperature range of -20 to 200 degree (Fahrenheit)
- Indoor/outdoor use
- Ideal for sealing both cold and hot air ducts
- Rated for flame spread and smoke development
HEATIT HISD 18-feet Pipe Heating Cable with Built-in Thermostat
- Use for water filled plastic (including PEX) or metal pipes. Not use for anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines and so on. Two year limited quality . If you are not completely satisfied with HEATIT heating cable, please don’t hesitate to contact our customer service in any time, we’ll try our best to solve your issues.
- Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 37F on 50F off. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid.
- Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket.
- Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8” and less than 1 1/2” in. diameter. No crossing. No spiral. No overlap itself. Only straight.
- Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don’t plug in the cable for a long time for testing. When you feel the slight warm, please turn it off.
Similar items with 4 stars and above
Grip Clip Heat Tape Pro for Ice Dam Prevention Heavy Duty – Self-Regulating – Plug-in Ready Heat Cable – 120V, 6 watts/FT (37 Feet + 10 Foot Cold Lead)
- AMERICAN SUPPORT: Knowledgeable, Minnesota-based company with expert support staff you can actually speak to about ice dam prevention. We are excited to help! Email us at [email protected]
- USES: For use on flat roofs, metal roofs, asphalt roofs, rubber roofs and more.
- HEAVY DUTY: Heat Tape Pro is a commercial-grade self-regulating heat cable that substantially outperforms cheap cables such as EasyHeat and FrostKing.
- WARRANTY: Best-in-Industry 5 year warranty – ETL Listed – WILL NOT short or burnout if cable is overlapped and can be used on flat roofs and metal roofs, unlike cheap cables.
- HEADS UP! Please don’t forget to order Radiant Solutions Company Roof Clips with this product – visit www.heattapecalculator.com for cable length and accessory recommendations.
We have actual humans available by phone. Heat cable is technical stuff and it’s great to have solid advice on how to install it for your ice dam prevention project. We are the only heat cable seller on Amazon who is a simple phone call away. Eat that impersonal, off shore competitors! Our cables are bad ass and so is our customer service. We’re not sure if we can swear on Amazon, but we just did. Radiant Solutions Company is a direct-to-consumer manufacturer with over 25 years in the business of ice dam prevention. Unlike cheap cables, Heat Tape Pro can be overlapped during installation, can be installed on flat roofs, metal roofs and rubber roofs, will not light leaves on fire under any circumstance and operates effectively when it’s 15 degrees or colder outside. Oh, and Heat Tape Pro is self-regulating, meaning it ‘asks’ for more energy as it gets colder outside and less energy when it’s warmer. The entire length of the cable is temperature sensitive such that colder areas demand more power than warmer areas. Hence the term “Self-Regulating”. Heat Tape Pro is serious stuff and holding it in your hand will tell you as much. It’s a worry-free, long term solution to your ice dam problems. Our cable creates melted pathways through ice or snow on your roof that allow water to escape instead of backing up through your roof system. Problem solved. Heat Tape Pro can be used for roof and gutter de-icing as well as pipe freeze protection. It’s suitable on pipes as small as ½” in diameter and can be used on both metal and plastic pipes. Be sure to order recommended installation accessories including Roof Clips and Downspout Hangers if needed.
Prime Wire & Cable RHC150W30 Roof & Gutter De-Icing Kit Roof Heating Cable
- 30 ft. Black roof & gutter de-icing kit, 150 watts, 2 ft. 18/3 SJTW blue power cord
- Promotes water flow in gutters and downspouts
- Helps prevent water damage caused by ice dams
- Includes roof cable, shingle clips, spacers, owner’s manual & labeling for breaker & on/off switch
- Total Outlet: 1
Roof and gutter De-Icing cables help prevent costly damage from ice Dam formation by preventing freezing of un-insulated roof eaves, Valleys, gutters and downspouts, and allows water to drain freely. This product is for use on inclined, tab-shingle roofs and in downspouts and gutters only. To ensure water can flow to the ground, cable should be installed on Unheated portions of the roof (usually the overhang) as well as in Valleys, gutter and downspouts. Roof and gutter De-Icing kits are available in lengths from 30 ft to 240 ft. These products are found as De-Icing and snow melting sets primarily in northern markets beginning in early October.
Frost King RC60 60 Feet, 120V, 5 Watts Per Foot, Electric Roof Cable
Frost King roof and gutter cables. Prevents ice build up in gutters and ice dams getting under the shingles. Kit comes complete with cable spacers and shingle clips. Complete installation instructions. Available in lengths from 30′ – 200′.
PHOENIX CABLES USA Pro Cold Weather Valve and Water Pipe Heating Cable/Multi-use for rigid plastic or metal pipes, preventing RV hose freezing or down a gutter downspout (15 Feet)
- NO WRAPPING AROUND PIPE MEANS EASY INSTALL AND LONGER COVERAGE – Other heat tape for water pipes are HARD to wrap and offer LESS coverage. Our pipe wrap heat tape is powerful and easy enough to install in a straight line to keep your pipes from freezing. The indicator light on our heat cable for water pipes lets you know your pipe warmer is on and ready to take on the harshest seasons.
- SAVE THOUSANDS ON COSTLY PLUMBING REPAIRS – Don’t wait before it’s too late and get stuck paying thousands of dollars on unexpected repairs that could be avoided. Our high-grade pipe heater is tough and durable enough for rigid plastic and metal pipes up to 2. 5” (58mm) in diameter. Our trace cables have a built in heat tape thermostat so you’ll always stay prepared for the unexpected.
- OUR HEAT STRIP SAVES MONEY ON ENERGY AND IS ECO-FRIENDLY – 120 Volt, 7 watts/ft. and only use 5 amps or less of electricity making our heat tapes for water pipes environmentally friendly for a low economical footprint. Save money with our electric heat cable by using less energy by powering the self regulating heat trace cable only when needed by automatically turning on below 38° F (3° C) and above 45° F (7 ° C).
- SAFETY TESTED HEATED PIPE WRAP FOR ALL SEASONS – When it comes to water pipe tape, compromise elsewhere for the safety of your home. Get peace of mind with our safety rated heat trace for pipes constructed with a continuous ground braid with a tough and durable polyurethane inner insulation and weather resistant PVC (high-low temperature) for outer protective jacket. Our heat tape with thermostat is approved for water filled plastic (including PEX) and metal pipes only.
- UL APPROVED, CSA CERTIFIED – Our heat trace for pipes are made of superior industrial grade heat shrinkage tube for connection. This pipe warmer heating cable is considered to be the safest per industry standards. Heating tape set-up includes: water pipe heat tape, grounded plug, built-in automatic thermostat and easy to understand instructions. Our plumbing heat tape plug into a standard 120 VAC outlet.
NO MORE FROZEN PIPES EVER AGAIN
What so special about our water pipe heating cable? Our energy efficient cables save on costly repairs by keeping your pipes flowing – no matter how cold it gets by turning on and off automatically.
No more complicated install instructions! You get our easy BONUS eBOOK to help with your one time simple and easy install for peace of mind all year long. OTHER KEY BENEFITS:
Once installed – set it and forget it. The self monitoring cable turns on below 38 degrees F and off above 45 degrees F
Use on your RV water hose or down a gutter downspout; wherever you need flowing water, just install our Phoenix Heat Cable
Uses power only when needed and consumes less than 5 amps that saves you money
Our package includes cable, grounded LED plug that indicates that the cable is working, thermostat and an instruction manual for easy install
THE FINE PRINT – 100% MONEY-BACK GUARANTEE
Our Phoenix pipe heating cable is made with high quality materials for lasting usage. We’re certain you’ll love our product or you’ll get your money back.
Our cables MAKE THE PERFECT GIFT for anyone that loves the outdoors and uses RV’s so ORDER NOW! Simply click “ADD TO CART” at the top of this page to order yours today!
HEATIT Aluminum Foil Tape Professional Grade – 2 inch x 150 feet 4.85 mil Thick(1.7 mil foil Thick and 3.15 mil Backing Thick) for HVAC, Ducts, Pipes, Metal Repair, Pipe Heating Cable Application etc
- HEATIT aluminum foil tape provide a tough, strong bond at low and high temperatures from -22 F to 248 F
- 2.0 inches wide x 150 feet (50 yards) length. 1.7 mil foil thick and 3.15 mil backing paper thick
- HEATIT aluminum foil tape can stick well to most surfaces by its high quality acrylic pressure sensitive adhesive. A clean, dry and free of oil or grease surface is necessary before applying HEATIT aluminum foil tape
- Flame retardant, UV resistant, Chemically resistant. Perform well in thermally conductive. Improving the heating and cooling efficiency
- Idea for Indoor and outdoor applications: pipe heating cable attachment, duct insulation, general repair, cold and hot air ducts, HVAC, aluminum sealing, copper pipe fixing etc
Conclusion
By our suggestions above, we hope that you can found heating metal tape for you.Please don’t forget to share your experience by comment in this post. Thank you!
