rinstips 
Nowadays, there are so many products of liquid cooling fitting in the market and you are wondering to choose a best one. You have searched for liquid cooling fitting in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings liquid cooling fitting which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Corsair Hydro X Series Xf Compression 10/13mm (3/8"/ 1/2") ID/OD Fittings Four Pack
- Dual 140mm fan mounts on either side of the radiator are ready for your most ambitious custom Liquid Cooling build.
- 30mm radiator thickness delivers extreme cooling performance with high-airflow and low-noise fans.
- A premium COPPER radiator core and 25 micron thick cooling fins provide a high thermal transfer rate optimized for CORSAIR’s performance copper water blocks.
- High-quality matte Black polyurethane coating delivers a flawless finish to match your system.
- Integrated fan screw guides make it easy to install fans even when the radiator is fitted into a case.
Corsair Hydro x series XF compression fittings are the perfect fit for your soft tubing custom cooling system, Machined from solid brass and clad in a range of durable finishes. Compatible with 10/13mm (3/8″/ 1/2″) ID/OD soft tubing and equipped with a ultra-tight compression compression fitting to securely seal your loop. Tech Support # 1-888-222-4346 opt #1
Similar items with 4 stars and above
Thermaltake Pacific DIY LCS Black G1/4 PETG 16mm (5/8") OD Tube 45 Degree Compression Fitting Cooling – CL-W096-CA00BL-A
- High Flow Leak Free Design: The fittings allow proper connection to G1/4 ports, securing properly to cooling components while providing an even seal around the tubing
- Black Coating Brass Fitting
- G 1/4″ Port
- For PETG Tubes: Outer Diameter 5/8″ (16mm)
- 3 Pre-installed O-Ring: Prevent coolant from leaking
The Thermaltake Pacific PETG Fittings provides a complete solution for enthusiast and custom PC builders to meet the needs of setting up a complete water cooling system. With G1/4″ durable copper fittings, finished in black coatings, take every detail seriously. Make your system a showcase for all to see with high quality components from Thermaltake. 2 Year Warranty.
Thermaltake Pacific Black 4 Build-in O-Rings C-Pro G1/4 PETG 16mm OD Compression Fitting 6 Pack CL-W214-CU00BL-B
- Fitment Reimagined: This new concept makes it easier than ever to install custom hard tube liquid cooling loops
- Four Built in O rings: Maximum leak prevention, secure compression seal, and peace of mind
- Protection You Expect: Surface treated and a special coating finish provides increased durability and protection from corrosion
- Build It Your Way: Compatible with liquid cooling components that utilize G1/4 thread ports and 16mm OD PETG, Acrylic, and Copper hard tubing
- Exclusively Designed Open End Wrench is Included
The Pacific C-Pro Series is a revolution in fitment design. It simplifies the process of setting up a custom liquid-cooling loop and provides a seal that outperforms traditional compression fittings. By using 4 preinstalled O-rings and an overhauled design, the C-Pro Series is the new standard in fitment technology and it is exclusive to Thermaltake.
P/N: CL-W214-CU00BL-B
Model: Pacific C-Pro G1/4 PETG 16mm OD 6 Pack – Black
Dimension: D26 x 21 (H) (mm)
Applicable: OD : 16 mm
Weight : 320 g
Material: CU + AL
Screw Thread: G 1/4
Note: PETG Tube to G1/4
Similar items with 4 stars and above
Thermaltake Pacific DIY OD 16mm (5/8") x ID 12mm (1/2") Water Cooling PETG Hard Tube Bending Kit CL-W093-AL00BL-A
- Near Perfect Bends: Essential for making precise bends when using 16mm OD PETG tube
- Mandrels: Includes Mandrels for 45/90/180/360 degree bends
- Pipe Cutter: Professional Grade Pip Cutter provides perfect beveled edge cuts
- Insert: Silicone Tube insert prevents kinks and help promote smooth bends while keeping inner wall diameter
- Mounting: Pre-drilled holes allow easy mounting of mandrels to flat surface
- Recommended use of soapy water assists with tube insertion and tube heating
- Warranty: 2 Years
Thermaltake Pacific DIY LCS Chrome G1/4 45 & 90 Degree Adapter Fitting Cooling – CL-W053-CU00SL-A
- High Flow Leak Free Design: The fittings allow proper connection to G1/4″ ports, securing properly to any cooling components
- Chrome Plated Brass Fitting
- G 1/4″ Port
- 360 Degree Rotation Design: Delivers easier tube routing, working around obstacles in the system
- Pre-installed O-Ring: Prevent coolant from leaking
Thermaltake introduces the Pacific Series Adapter fittings for the ultimate in custom PC water cooling configurations. Finished in black-plated copper, the adapter fitting is in 360-degree revolvable design, and consists of two sealed O-rings with side printed Tt logo, allowing users to redirect the fittings at 45 and 90 degree angle for easier tube routing. Choose from: 45, 90, 45 & 45, 45 & 90 degree, and 4-way connector, Thermaltake fittings provide a complete solution for DIY enthusiasts and PC builders by giving users ideal mounting, fitting and flow. 2 Year Warranty.
Thermaltake Pacific C360 Ddc Res/Pump 5V Motherboard Sync Copper Radiator Soft Tube Water Cooling Kit CL-W253-CU12SW-A
- Analog/digital lighting – Analog lighting allows a selection of 7 lighting effects with the included a RGB Controller. Connect lights to select 5V RGB Capable motherboards TO utilize digital lighting schemes from as US aura Sync, Gigabyte RGB FUSION, MSI Mystic Light Sync, and ASROCK polychrome Sync
- All includded – the C360 soft tube Kit contains a CPU water block, pump/reservoir, radiator, fans, fittings, tubing, and coolant, which are components necessary to complete a CPU water cooling loop
- Slim copper radiator – the C360 is engineered with 12 copper flat tubes and 17 fins per Inch. This radiator’s 27mm thick design assures fitment compatibility with most form Factor chassis
- Exclusive components – W4 a RGB Edition water block, T1000 pure Clear Coolant, and a new pr15-ddc pump/reservoir combo
- 2 years
Thermaltake Pacific C360 DDC soft tube Water cooling kit is designed for users who likes an efficient and high-quality Combo kit that is ready to sync with 5V RGB Capable motherboards from Asus, Gigabyte, MSI and as rock. The kit includes three pure 12 a RGB sync radiator fans, a Pacific W4 a RGB CPU water block, Pacific pr15-ddc pump/reservoir Combo, Pacific C360 radiator, a bottle of T1000 transparent coolant pure Clear, six Pacific 1/2” Id x 3/4” Od compressions, two meters of V-Tumbler 4T 1/2’‘(12. 7mm) ID x 3/4’‘(19mm) OD transparent tube, an a RGB LED controller, and other accessories. dimension: 520 (L) x 200 (W) x 232 (h)compatibility: intel LGA 2066/2011/1366/1156/1155/1151/1150/775amd AM4/FM2/FM1/AM3+/AM3/AM2+/am2(cpu socket)components Dimension: pump & reservoir: 86. 54 (L) x 62 (W) x 140. 1 (H) mm copper radiator: 29. 5 (H) x 119 (W) x 399 (l) mm tube Dimension: od: 16mm, ID: 12mmfan spec: pwm 5001500 RPM, ( a RGB Controller or 5V MB a RGB sync )coolant: T1000 coolant pure clear kit contents: cpu water block – Pacific W4 a RGB CPU water block x1pump/reservoir- Pacific pr15-ddc pump/reservoir Combo x1copper radiator- Pacific C360 radiator 29. 5 (H) x 119 (W) x 399 (l) mm x1argb fan- pure 12 a RGB sync radiator fan TT Premium Edition x3- a RGB LED controller fittings – Pacific 1/2” Id x 3/4” Od compression – Black x6- Pacific G1/4 90 degree adapter – Black x2coolant- Thermaltake T1000 coolant pure Clear x1 tube- V-Tumbler 4T 1/2’‘(12. 7mm) ID x 3/4’‘(19mm) transparent tube x2 meters accessory- Intel and AMD universal Back Plated & mounting kit- 24pin ATX bridge tool x1- Thermaltake thermal grease x1
Similar items with 4 stars and above
IronBuddy 4Pcs G1/4" Barb Fitting Adapter OD 11mm Soft Tubing Hose Barb Fitting for Computer Water Cooling System, Silver
- ✬The barb fitting is made of brass material, chromed surface, prevent rust and durable to use.
- ✬Thread size: G1/4 (International General).
- ✬With hidden silicone ring, perfect for connection and seal. Effectively prevent water and liquid from flowing out.
- ✬11mm OD, Suitable for 9.5-10.1mm (about 3/8”) ID hose pipe soft tubing. Perfect for connection between water blocks, radiators, water pumps, reservoir and other water cooling system kit.
- ✬Package Contain: 4Pcs OD 11mm G1/4″ Barb fitting.
IronBuddy 4Pcs OD 11mm G1/4″ barb fitting suitable for 9.5-10.1mm (about 3/8”) ID hose pipe soft tubing. Perfect for connection between water blocks, radiators, water pumps, reservoir and other water cooling system kit.
Material: Brass.
Color: Silver.
Thread size: G1/4 (International General).
Barb Fitting OD: 11mm
Package included: 4Pcs OD 11mm G1/4″ Hose Barb fitting.
Similar items with 4 stars and above
XSPC G1/4" 5mm Male to Male Fitting, Chrome, 4-Pack
XSPC fitting for water cooling systems with easy tool-free installation.
Model: TR-5060175581891-4P
Similar items with 4 stars and above
XSPC G1/4" Plug V2, Black Chrome, 4-pack
XSPC plug fitting for water cooling systems with easy tool-free installation.
Model: TR-5060175587015-4P
Similar items with 4 stars and above
Conclusion
By our suggestions above, we hope that you can found liquid cooling fitting for you.Please don’t forget to share your experience by comment in this post. Thank you!
