rinstips 
Nowadays, there are so many products of liquid cooling lepa in the market and you are wondering to choose a best one. You have searched for liquid cooling lepa in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings liquid cooling lepa which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
LEPA Exllusion240 Intel/AMD 400W+ TDP Liquid CPU Cooler with Refillable Coolant Design,LPWEL240-HF (AM4 bracket included!)
- 400w+TDP cooling capacity ensuring CPU stability index extensive & prolonged over clocking operation .
- Rapid CPU Hot spot elimination . Large copper base with patented Dual-CDP ( Central Diffusing Passage) micro-fin structure accelerates the heat absorption and eliminate CPU hot spot efficiently.
- Large & transparent LED water block and tube. double the coolant circulation and easily monitor coolant flow & volume status.
- Enriching your coolant color. customize your own coolant color with 3 different colored R>
- G>
- B>
- dyes
- Dual Convex Blade Fan. Advance aerodynamic design boosts down-force air pressure and creates high-volume airflow.
The LEPA Exllusion 240 is a closed-loop water cooler, great for power users and overclockers seeking quiet and high performance liquid cooling for their extreme systems. Equipped with copper base with CDP (Central Diffusing Passage) cold plate, 240mm aluminum radiator, two 120mm Dual-Convex-Blades fans, this model delivers up to 400W+ TDP cooling capacity to handle the extremely overclocked processor. Great for DIY professionals, this semi-DIY water cooling solution features coolant refillable design, and included red, blue, green dyes allow users to customize the preferred coolant color. Thus users can customize the tone of their coolant to their wildest imagination.
Thermaltake Water 3.0 LGA 2011-3 AM4 Support 280 Riing RGB Edition 140mm RGB PWM Fan AIO Liquid Cooling System 3 Year Warranty CL-W138-PL14SW-A
- Supports AMD AM4/FM2/FM1/AM3+/AM3/AM2+/AM2
- Supports Intel LGA 2011-3/2011/1366/1156/1155/1151/1150
- Patented PWM Riing 14 RGB LED: 2 X 140mm RGB radiator fans. Thermaltake smart fan controller can play/pause 5 LED color modes and cycle through 256 colors
- 280mm High Efficiency Radiator with Push/Pull Mounting Support: 280mm large surface radiator not only doubles cooling surface, but also supports up to 4 x 140mm fans for additional heat dissipation
- Copper Cold Plate CPU block with Braded Sleeved Tubes: The high performance copper base plate accelerates the heat conductivity
- High Quality Pump with Easy Installation Maintenance-free Operation: Enables max water circulation, keeping copper plate cool.
- High Performance Waterblock and Durable Sleeved Cable
- Low evaporation tube (326mm) decreases coolant loss
- no refill needed
- Simple Setup
- Tt LCS Certified: Liquid Cooling Supported. Compatible with extreme liquid cooling configurations
Designed to exceed enthusiast’s expectations, the Thermaltake Water 3.0 Riing RGB 280 comes with dual 140mm high-static pressure patented LED fans with a large surface radiator, high performance waterblock and pump for ultimate CPU cooling. The built-in Riing fan adopted PWM fan, compression blades and hydraulic bearings that guarantee superior cooling performance and quiet operation. One simple upgrade allows users to enjoy better cooling performance and greater CPU protection!
Compatibility: Intel LGA 2066/2011-3/2011/1366/1156/1155/1151/1150, AMD TR4/AM4/FM2/FM1/AM3+/AM3/AM2+/AM2, *AIO Cooler bracket adapter comes in the AMD Threadripper CPU box.
Water Block: Material : Copper
Pump
Rated Voltage : 12 V
Rated Current : 175 mA
Fan
Dimension : 140 x 140 x 25 mm
Speed : 800 ~ 1500 R.P.M (PWM) , 400 ~ 1000 R.P.M (Low Noise Mode)
Noise Level : 18.5 ~ 26.4 dB-A
Rated Voltage : 12 V
Max. Air Flow : 22.14 ~ 40.6 CFM
Max. Pressure : 0.57 ~ 2.01 mm-H2O
Connector : 5 pin
Radiator: Dimension : 313 x 139 x 27 mm
Tube
Length : 326 mm
Material : Braided Tube
Weight: 1181g
Similar items with 4 stars and above
Thermaltake Pacific DIY LCS Black G1/4 PETG 16mm (5/8") OD Tube 45 Degree Compression Fitting Cooling – CL-W096-CA00BL-A
- High Flow Leak Free Design: The fittings allow proper connection to G1/4 ports, securing properly to cooling components while providing an even seal around the tubing
- Black Coating Brass Fitting
- G 1/4″ Port
- For PETG Tubes: Outer Diameter 5/8″ (16mm)
- 3 Pre-installed O-Ring: Prevent coolant from leaking
The Thermaltake Pacific PETG Fittings provides a complete solution for enthusiast and custom PC builders to meet the needs of setting up a complete water cooling system. With G1/4″ durable copper fittings, finished in black coatings, take every detail seriously. Make your system a showcase for all to see with high quality components from Thermaltake. 2 Year Warranty.
Thermaltake Pacific DIY LCS PR15-D5 200ml 5-Speed Adjustable D5 Pump/Reservoir Combo 3-Port G 1/4" Thread Tt LCS Certified POM PMMA CL-W080-PL00BL-A
- Sturdy and Durable Design: Featuring 6mm thick of the pipe wall, Pacific PR Series can sustain the maximum pressure up to 99 PSI (Pounds per square inch). Easily open out the top cap for cleaning
- Driven Performance: High-lift pumping can reach up to 15 feet high at the max speed. Gamers can build up liquid cooling loop, two GPUs, three radiators, or even more DIY components at the same time
- Ultimate Speed Controller: Designed with a manual speed control knob to provide five speeds. Maximum discharge up to 1135 L/hr provides high-performance cooling to your components
- Heat-resistant Acrylic Tank: Featuring reliable, light weighted POM and PMMA construction, crystal clear and highly durable. High quality acrylic (PMMA) tube maximum working temperature: 131℉ (55℃)
Thermaltake Pacific DIY LCS PR15-D5 200ml 5-Speed Adjustable D5 Pump/Reservoir Combo 3-Port G 1/4″ Thread Tt LCS Certified POM PMMA CL-W080-PL00BL-A
Thermaltake launches the Pacific PR Series tube reservoir and D5 pump for the ultimate in custom PC water cooling configurations. Featuring exceptional performance and unrivalled reliability, the PR15-D5 is manufactured from high quality POM and PMMA material to provide a crystal clear, high performance, durable solution. By giving users ideal mounting, fitting and flow, the PR22-D5 is the right choice for PC enthusiasts. Make your system a showcase for all to see with the Thermaltake Pacific PR Series.
Key Features:
- Featuring 6mm thick of the pipe wall, which can sustain the maximum pressure up to 99 PSI (Pounds per square inch).
- Heat-Resistant Acrylic Tank: Made of reliable, light weighted POM and PMMA construction, which is crystal clear and highly durable. High quality acrylic (PMMA) tube maximum working temperature: 131°F
- G ¼” Thread Ports
Specification:
- 2mm (L) x 87.4mm (W) x 228.1mm (H)
- Material: POM + PMMA
- Capacity: 200ml
- Maximum Head: 15 Feet
- Maximum Flow Rate: 1135 L/Hr
- Maximum Pressure: 50 PSI
- Connector: 4 Pin
- Pump Speed: 1800, 2550, 3300, 4050, 4800 RPM
- G ¼”
Support
Please visit our website or search “Thermaltake Support” for any assistance.
Similar items with 4 stars and above
Thermaltake 120mm Pacific DIY Liquid Cooling System R120 Radiator Cooling CL-W008-AL00BL-A
- Optimized Heat Dispatching: Thermaltake R Series Radiators deliver an average heating load of 32℃-35℃. After brazing, the fin and tube connect to form a joint, thereby creating uniform heat transfer.
- Slim Form Factor Design: R Series is a slim radiator with a 13-set flat tube design to increase heat transfer. Water flows down on one side, and then circulates back to the other side of the radiator.
- High-Density Fin Design: The cooling performance improves significantly with increased fan speed, offering exceptional cooling performance during operation. FPI (fin per inch): 17.
- German-Made Anti-Corrosion Materials: Designed with German aerospace-grade materials and constructed with zinc. Corrosion potentials of aluminum alloy with zinc can be reduced by 55.6% after brazing.
The Thermaltake Pacific R120 introduces high-quality radiators to deliver outstanding water cooling performance for the enthusiast’s PC. Manufactured from high-quality German aluminum alloy and aerospace-grade materials, configurations of 120mm to provide exceptional performance. Integrated G1/4″ threads make it easy to install, while rigid connections ensure leak-resistant measures are in place. With an ideal mounting, fitting and flow set-up, the Thermaltake Pacific R Series meets your cooling needs in every way. 2 Year Warranty.
Similar items with 4 stars and above
Thermaltake Pacific DIY LCS Chrome G1/4 45 & 90 Degree Adapter Fitting Cooling – CL-W053-CU00SL-A
- High Flow Leak Free Design: The fittings allow proper connection to G1/4″ ports, securing properly to any cooling components
- Chrome Plated Brass Fitting
- G 1/4″ Port
- 360 Degree Rotation Design: Delivers easier tube routing, working around obstacles in the system
- Pre-installed O-Ring: Prevent coolant from leaking
Thermaltake introduces the Pacific Series Adapter fittings for the ultimate in custom PC water cooling configurations. Finished in black-plated copper, the adapter fitting is in 360-degree revolvable design, and consists of two sealed O-rings with side printed Tt logo, allowing users to redirect the fittings at 45 and 90 degree angle for easier tube routing. Choose from: 45, 90, 45 & 45, 45 & 90 degree, and 4-way connector, Thermaltake fittings provide a complete solution for DIY enthusiasts and PC builders by giving users ideal mounting, fitting and flow. 2 Year Warranty.
Thermaltake Pacific DIY LCS Black G1/4 PETG 16mm (5/8") OD Tube 90 Degree Compression Fitting Cooling CL-W097-CA00BL-A
- High flow Leak free design: the fittings allow proper connection to G1/4 Ports, Securing properly to cooling components while providing an even seal around the tubing
- Black coating brass fitting
- G 1/4″ port
- For PETG tubes: outer Diameter 5/8″ (16mm)
- 3 pre-installed O-Ring: prevent coolant from leaking
The Thermaltake Pacific PETG fittings provides a complete solution for enthusiast and custom PC builders to meet the needs of setting up a complete water cooling system. With G1/4″ durable copper fittings, finished in Black coatings, take every detail seriously. Make your system a showcase for all to see with High quality components from Thermaltake. 2 Year Warranty.
Thermaltake Pacific DIY LCS 1/2" ID x 3/4" OD Compression Fitting Black Cooling CL-W030-CA00BL-A
- High Flow Leak Free Design: Fittings allow proper connection to G1/4” ports, securing properly to cooling components while providing an even seal around the tubing.
- Black Plated Brass Fitting
- Compatible with PVC Tubing: Inner diameter: 1/2” (13 mm)
- Outer diameter: 3/4” (19 mm)
- Pre-installed O-Ring
- 2 Year Warranty
Thermaltake introduces the Pacific Series Compression fittings for the ultimate in custom PC water cooling configurations. Finished in black-plated copper, the compression fitting includes a base barb and quality O-ring with side printed Tt logo. Choose from: 5/8” and 3/4″ OD compression size, Thermaltake fittings provide a complete solution for DIY enthusiasts and PC builders by giving users ideal mounting, fitting and flow. 2 Year Warranty.
Thermaltake Pacific DIY LCS Chrome G1/4 PETG 16mm (5/8") OD Tube 45 Degree Compression Fitting Cooling CL-W096-CA00SL-A
- High flow Leak free design: the fittings allow proper connection to G1/4 Ports, Securing properly to cooling components while providing an even seal around the tubing
- Chrome plated brass fitting
- G 1/4″ port
- For PETG tubes: outer Diameter 5/8″ (16mm)
- 3 pre-installed O-Ring: prevent coolant from leaking
The Thermaltake Pacific PETG fittings provides a complete solution for enthusiast and custom PC builders to meet the needs of setting up a complete water cooling system. With G1/4″ durable copper fittings, finished in Chrome coatings, take every detail seriously. Make your system a showcase for all to see with High quality components from Thermaltake. 2 Year Warranty.
Thermaltake Pacific DIY LCS Black G1/4 PETG 16mm (5/8") OD Tube 90 Degree Dual Compression Fitting Cooling – CL-W099-CA00BL-A
- High Flow Leak Free Design: The fittings allow proper connection to G1/4 ports, securing properly to cooling components while providing an even seal around the tubing
- Black Coating Brass Fitting
- G 1/4″ Port
- For PETG Tubes: Outer Diameter 5/8″ (16mm)
- 6 Pre-installed O-Ring: Prevent coolant from leaking
The Thermaltake Pacific PETG Fittings provides a complete solution for enthusiast and custom PC builders to meet the needs of setting up a complete water cooling system. With G1/4″ durable copper fittings, finished in black coatings, take every detail seriously. Make your system a showcase for all to see with high quality components from Thermaltake. 2 Year Warranty.
Conclusion
By our suggestions above, we hope that you can found liquid cooling lepa for you.Please don’t forget to share your experience by comment in this post. Thank you!
