rinstips 
Nowadays, there are so many products of ninja kitchen system replacement parts in the market and you are wondering to choose a best one. You have searched for ninja kitchen system replacement parts in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings ninja kitchen system replacement parts which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
29,908 Reviews Scanned
Ninja Blender Replacement Parts 7 Fins Replacement Extractor Blade Parts for Nutri Ninja Blender Blade Assembly Fits 1000w Nutri Ninja Auto-iQ BL480-30 BL482-30 BL682 BL640
- 【Ninja Blade Apply to】7 fins Nutri Ninja Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012 (Please confirm your blender need 7 fins replacement blade before purchasing).
- 【Nutri Ninja Replacement Parts】 Pro Extractor Replacement Blade by Best Potok. 7 Fins, 4″/10CM diameter, 165g, made of food grade PP and stainless steel.
- 【Important Tips】Note1: The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the replacement bottom blade.Note2: Please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade, if you’re going to use this replacement gasket.
- 【Packing Include】 1x 7 Fins Bottom Blade Replacement, 2 x Replacement Gasket Rubber ( One Gasket Rubber already on the 7 fins replacement blade). Please check your existing blade by counting the fins before purchase. It Should Be 7fin.
- 【100% SATISFACTION GUARANTEE】 If you are buying before or after purchase any questions, please feel free to contact us, we’ll issue you a full refund or replacement.
One Ninja replacement blade assembly (7-fin as pictured) for Nutri Ninja Blender. Fits NUTRI NINJA r BL487 BL487QPL BL488W BL490 BL491 BL492 BL492W BL640 BL641 BL642 BL642W BL642Z BL680 BL680A BL682 BL450-30, BL451-30, BL454-30 & BL456-30.
KIND REMINDER BEFORE PURCHASE:
1: Your original motor base must be 7 fins. The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base: there are too many models of ninja blender blade, if the last two digitals(not part of model #) or any character is difference, please don’t purchase it
2: Your blender model must be identical with our stated model.”ONLY COMPATABLE WITH” 7 fins model Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012.
NOT FIT FOR BL660, BL663, BL740, BL770, BL771,BL773CO, BL780, BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.
TIPS FOR USAGE
1. You are recommended to replace your ninja blender every 6 months or as needed for optimal performance
2. Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it
3. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding leakage）
4. Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line
5. Place the replacement blade onto the cup and screw it tightly until you have a good seal
6. Please make sure it in right place and locked tightly
7. Do not run your blender over 4 minutes at a time to prevent overheating of the blender
Ninja Blender System with Auto-IQ Technology, 72 oz. Replacement Pitcher
72 Oz / 9 cup pitcherbpa free , dishwasher safe works with bl640, bl641, bl642, bl642w, bl642z, bl680a, bl682please check the photo of the bottom of the pitcher to make sure it is compatible with your power base.
BL770 Replacement Parts, Single Serve Blade Compatible with Nutri Ninja Mega Kitchen System BL660 BL771 BL773co Blender By Wadoy (6 fins)
- PREFECT FIT – 6 fins Blade for Nutri Ninja Blender Replacement Parts Accessories Fit for BL660 BL770 BL740 BL771 BL773CO
- HIGH QUALITY – Made of Food Grade BPA Free Plastic and High-strength stainless steel blade. No leakage,Durable usely and Material safety.
- EASY TO SMASH – Effortlessly Pulverizes Fruits, Vegetables, Superfoods and Protein Shakes into a Delicious, Smooth Texture. Dishwasher Safe.
- GREAT FUNCTION -Turn over and stir the food, Rolled cutting, retaining food nutrition
- MONEY-BACK GUARANTEE – This is not original part, But it works better than Nutri Ninja Blender.
Description:
– Item Name: Replacement Parts for Nutri Ninja Blender Blade Assembly
– Blade material: stainless steel
– Blade shape: Cross blade
– This Replacement Ninja Blender Accessories Suit for: Nutri Ninja BL770, BL771, BL772, BL773CO ,BL780, BL660, BL740.(Please check your model carefully before purchasing.)
Two conditions must be met at the same time before purchase:
1: Your original motor base must be 6 fins;
2: Your blender model must identity with our stated model.
Our Blade for Nutra Ninja Blender can’t fit all the 6 fins blender’s motor base:
There are too many models of ninja blender blade, if any character is difference, please don’t purchase it.
Warm Tips: You are recommended to replace your ninja blender every 6 months or as needed for optimal performance.
Pay attention to before use :
– Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it.
– Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding a leak)
– Do not overfill! To avoid spilling, do not add ingredients past the Max fill line.
– Place the replacement blade onto the cup and screw it tightly until you have a good seal.
– Please make sure it in right place and locked tightly.
– Do not run your blender over 4 minutes at a time to prevent overheating of the blender.
Warranty Policy:
For any reason you’re not completely satisfied, you can ask for a replacement or full refund, no questions asked.
NEW Ninja Ultra XL 72oz Pitcher for BL770 BL771 BL780 Mega Kitchen Blender
- Please check your blender’s model # before purchase.- The model number can be found on the bottom of blender.
- Package includes: 1x 72oz pitcher, no lid, no blade.
- Does NOT work with BL773CO, Auto-iQ, Ultima or Duo series.
- All items are Genuine Ninja parts.
- This package Only works with Ninja BL770 BL771 BL780 BL780CO !!!!
!!! IMPORTANT !!! — Old model pitcher, with regular rim . Please check pictures and selection guide to make sure you select the correct pitcher as there are 2 versions available
Replacement Parts Ninja Bottom suitable for Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 Nutri Ninja Blender Auto iQ Blade (Black)
- ♠ Ninja Blade Apply to BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012,Please confirm your blender need 7 fins replacement blade before purchasing
- ♠Ninja Replacement Blade –7 Fins, 4″/10CM diameter, 165g, made of food grade PP and stainless steel (Should you have any question about this item, feel free to contact us! )
- ♠Easy installation -It can be well loaded and easily removed. Just replace your bad blade and juicer can be reused.
- ♠Note1: The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the replacement bottom blade
- ♠Note2: Be careful of the blade when open the package
Color:Blade 7 Fins
Description:
Item Type: Ninja Blender Replacement Parts for blender
Blade material: stainless steel
Blade shape: Cross blade
＊This Ninja Blender Accessories Suit for:
BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012.
＊Not fit for :
BL660,BL663,BL740,BL770,BL771,BL773CO,BL780,BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.
NOTE:
Two conditions must be met at the same time before purchase:
1: Your original motor base must be 7 fins;
2: Your blender model must identity with our stated model.
The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base:
There are too many models of ninja blender blade, if any character is difference, please don’t purchase it.
Note: You are recommended to replace your ninja blender every 6 months or as needed for optimal performance.
Pay attention to before use :
Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it.
Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding a leak)
Do not overfill! To avoid spilling, do not add ingredients past the Max fill line.
Place the replacement blade onto the cup and screw it tightly until you have a good seal.
Please make sure it in right place and locked tightly.
Do not run your blender over 4 minutes at a time to prevent overheating of the blender.
Packing including:
1 x Ninja blade Replacement
Replacement Extractor Blade for Nutri Ninja，Premium Bottom Blade for 1000W/1500W Ninja Auto iQ BL482 BL642 BL682 Blenders, Blender Spare Parts and Accessories, Auto iQ 7 Fins Blade Assembly
- ★★★★★ Good replacement part for blender, make your juicer reuse again and perfect for all your blending and mixing needs
- ★★★★★ 7 fins bottom stainless steel blade, brings qualified anti-corrosion performance
- ★★★★★ BPA Free, effortlessly pulverizes fruits, vegetables, and shakes into a delicious, smooth texture
- ★★★★★ Great replacement, easy to change, perfectly fit for your blender/juicer.
- ★★★★★ Suitable for BL2012/BL2013/BL480/BL480D/BL481/BL482/BL486CO/BL487/BL487A/BL488W/BL490/BL491/BL492/BL492W/BL640/BL641/BL642/BL642W/BL642Z/BL680A/BL682/NN100A/NN101/NN102
Features:
Good replacement part for blender, make your juicer reuse again and perfect for all your blending and mixing needs. 7 fins bottom stainless steel blade, brings qualified anti-corrosion performance. BPA Free, effortlessly pulverizes fruits, vegetables, and shakes into a delicious, smooth texture. Great replacement, easy to change, perfectly fit for your blender/juicer. Suitable for BL2012/BL2013/BL480/BL480D/BL481/BL482/BL486CO/BL487/BL487A/BL488W/BL490/BL491/BL492/BL492W/BL640/BL641/BL642/BL642W/BL642Z/BL680A/BL682/NN100A/NN101/NN102.
Specification:
Condiiton: 100% Brand New
Material: Plastic + Metal
Color: Black
Applicable Model: For BL2012/BL2013/BL480/BL480D/BL481/BL482/BL486CO/BL487/BL487A/BL488W/BL490/BL491/BL492/BL492W/BL640/BL641/BL642/BL642W/BL642Z/BL680A/BL682/NN100A/NN101/NN102
Product Size: Approx. 10 * 8cm / 3.9 * 3.1inch
Package Weight: Approx. 214g
Package Included:
1 * Juicer Bottom Blade
Ninja Kitchen Systems Blenders 6 Blade Assembly 1100 Watt 1200 Watt Authentic Replacement
Ninja Pro Extractor Blades Assembly for BL642 Blender DUO with Auto-iQ Replacement ( 7 Fin )
Ninja Blade Apply to BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012,Please confirm your blender need 7 fins replacement blade before purchasing
Replacement 6-Blade Attachment for Ninja Kitchen System 1100
Fits NJ600 NJ602 BL700 BL770 BL771 BL780 BL660 BL682 BL640 BL641 BL642 BL773CO and others
Blade 7 Fins Replacement Parts Ninja Bottom suitable for Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 Nutri Ninja Blender Auto iQ Blade
- ♠ Ninja Blade Apply to BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012,Please confirm your blender need 7 fins replacement blade before purchasing
- ♠Ninja Replacement Blade –7 Fins, 4″/10CM diameter, 165g, made of food grade PP and stainless steel (Should you have any question about this item, feel free to contact us! )
- ♠Easy installation -It can be well loaded and easily removed. Just replace your bad blade and juicer can be reused.
- ♠Note1: The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the replacement bottom blade
- ♠Note2: Be careful of the blade when open the package
Color:Blade 7 Fins
Description:
Item Type: Ninja Blender Replacement Parts for blender
Blade material: stainless steel
Blade shape: Cross blade
＊This Ninja Blender Accessories Suit for:
BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012.
＊Not fit for :
BL660,BL663,BL740,BL770,BL771,BL773CO,BL780,BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.
NOTE:
Two conditions must be met at the same time before purchase:
1: Your original motor base must be 7 fins;
2: Your blender model must identity with our stated model.
The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base:
There are too many models of ninja blender blade, if any character is difference, please don’t purchase it.
Note: You are recommended to replace your ninja blender every 6 months or as needed for optimal performance.
Pay attention to before use :
Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it.
Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding a leak)
Do not overfill! To avoid spilling, do not add ingredients past the Max fill line.
Place the replacement blade onto the cup and screw it tightly until you have a good seal.
Please make sure it in right place and locked tightly.
Do not run your blender over 4 minutes at a time to prevent overheating of the blender.
Packing including:
1 x Ninja blade Replacement
1x Extra Gasket Rubber
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy ninja kitchen system replacement parts, eg:
- What are Top 10 ninja kitchen system replacement parts for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 ninja kitchen system replacement parts to buy?
- What are Top Rated ninja kitchen system replacement parts to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) ninja kitchen system replacement parts?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for ninja kitchen system replacement parts.
- Before deciding to buy any ninja kitchen system replacement parts, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose ninja kitchen system replacement parts and What you should consider when buying the ninja kitchen system replacement parts and Where to Buy or Purchase the ninja kitchen system replacement parts. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 ninja kitchen system replacement parts of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about ninja kitchen system replacement parts.
Conclusion
By our suggestions above, we hope that you can found ninja kitchen system replacement parts for you.Please don’t forget to share your experience by comment in this post. Thank you!
