rinstips 
Nowadays, there are so many products of thermal cooling adhesive in the market and you are wondering to choose a best one. You have searched for thermal cooling adhesive in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings thermal cooling adhesive which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
25Mx20mmx0.15mm Thermal Adhesive Tape,High Performance Thermally Double Side Tapes Cooling Pad Apply To Laptop Heatsink,LED,IGBT,Computer CPU Fan,GPU Cooler,Modules,MOS Tube,SSD Drives
- Aikenuo thermal adhesive Tape is a simple and practical tape, easy to install, easy to use, easy to eliminate.
- Aikenuo thermal tape with the high thermal conductivity, insulation, strong stickiness, softness, compression.
- Widely used in most electronic devices,High tensile strength and strong adhesion hold the device firmly in place, to achieve the most effective thermal dissipation.
- Used for fill the uneven surface,Can be tightly and firmly fit the heat source devices and heat sink,heat sink and IC chip bonding, high power LED and heat aluminum bonding.
- Thermal double-sided tape has a thermal conductivity of only 1.5 W/mk, Can’t provide good cooling results, If you need high thermal conductivity products, Please search (B074W99H6R), This is our highest thermal conductivity product, Its thermal conductivity is 6.0 W/mk, It is the highest specification thermal pad on the market, but it is not very sticky, You can use these two different items together.Our products also include Silver Thermal Compound Grease Paste.
Specification:
Dimension: 20mm x 25m (Width x Length)
Glass fiber thickness: 0.15mm
Thermal Conductivity:1.5 W/m-k
Breakdown Voltage: 5KVAC
Thermal impedance : 0.3℃in2/w
Initial Adhesion: 1.5kg/inch
180°Adhesion power: >18 N/25mm
Applicable temperature range:-30~+150 °C
Features:
Thermal conductivity and high stability, its life than the general heat double-sided stickers long,
normal temperature (30~+150 °C ) can work for a minimum of 5 years.
Notes For Attention:
1.When using thermal conductive double-sided tape, keep the adhesive surface clean and dry.
2.After tearing off the heat-conductive double-sided tape to peel the paper, double-sided thermal tape is evenly pressed with your fingers (just a little strength).
3.The viscosity of the heat-conductive double-sided adhesive tape have initial viscosity and persistent viscosity, and at room temperature, it takes 72 hours
to achieve the maximum adhesive strength,
That is, at the beginning of the sticky adhesive that is the initial viscosity to 40% of its maximum viscosity, persistent stickiness is stable over time.
4.In the paste process, the appropriate heating (60 ~ 70 ℃), will greatly contribute to the effective increase in the area of adhesive, and as soon as possible to achieve maximum adhesion,
In the lower temperature of the winter, it's little tips that heating to increase the viscosity of the heat-conductive double-sided tape when using the thermal conductive tape.
Package included:
1 Roll Thermal Conductive Double-sided Tape
AIYUNNI Double Sided Tape 10mm x 25M x 0.25mm Thermal Adhesive Tape Cooling Pad Double Side Tapes Apply to Heatsink LED IGBT IC Chip Computer CPU GPU Modules MOS Tube SSD Drives
- High Durability–Compared to other thermal item, this cooling tape is with much longer lifetime, it will last at least for 5 years.Long term heat resistant 120°C, short term heat resistant 180°C.
- With the features of high thermal conductivity, insulation, strong stickiness, softness, compression, thermal double conductive tape is great helper to solve heat dissipation for many electronics products.
- Professional—Excellent thermal conductivity, ideal thermal adhesive tape for attaching heatsinks, chipset, high power LED, Video Card RAM, SSD drives etc.
- Safe Application—The cooling tape is metal-free and non-electrical conductive which eliminates any risks of causing short circuit, adding more protection to the CPU and other devices
- Easy to use – Just stick on surface of any object and tear the blue release paper, which can be tightly and firmly conglutinate on the heat source devices and heat sink to speed the heat dissipation
Specification:
Dimension: 10mm x 25m (Width x Length)
Glass fiber thickness: 0.25mm
Thermal Conductivity:1.5 W/m-k
Breakdown Voltage: 4KVAC
Thermal impedance : 0.3℃in2/w
Initial Adhesion: 1.3kg/inch
180°Adhesion power: >16 N/25mm
Heat Resistance: 120°C (long time), 180°C ( short time)
Applicable temperature range:-20~+120 °C
Notes For Attention:
1.When using thermal conductive double-sided tape, keep the adhesive surface clean and dry.
2.After tearing off the heat-conductive double-sided tape to peel the paper, double-sided thermal tape is evenly pressed with your fingers (just a little strength).
3.The viscosity of the heat-conductive double-sided adhesive tape have initial viscosity and persistent viscosity, and at room temperature, it takes 72 hours
to achieve the maximum adhesive strength. That is, at the beginning of the sticky adhesive that is the initial viscosity to 40% of its maximum viscosity, persistent stickiness is stable over time.
4.In the paste process, the appropriate heating (60 ~ 70 ℃), will greatly contribute to the effective increase in the area of adhesive, and as soon as possible to achieve maximum adhesion.
In the lower temperature of the winter, it's little tips that heating to increase the viscosity of the heat-conductive double-sided tape when using the thermal conductive tape.
Package included:
1 Roll Thermal Conductive Double-sided Tape
25M x 20mm x 0.25mm Thermal Adhesive Tape,High Performance Thermal Double Side Tapes Cooling Pad Apply to Heatsink,LED,IGBT, IC Chip,Computer CPU,GPU,Modules, MOS Tube,SSD Drives
- ★thermal conductivity double-sided adhesive With high thermal conductivity and insulation properties and compression, adhesion,Can fill the uneven surface,Can be tightly and firmly fit the heat source devices and heat sink,Has strong adhesive strength,and thermal resistance is small,effectively replace the grease and mechanical fixation,A large number of applications in the bonding heat sink to the microprocessor and other power consumption of the semiconductor.
- ★Widely applied: high power LED,High power power supply, automotive electronic heating module, motor controller, communication equipment, power semiconductor, MOS tube, power tube, IGBT chip, high voltage, high temperature, high power welder, display, computer, Video Card RAM, DDR Memory Modules, SSD drives,solar , New energy heating power devices.
- ★Features: With the features of high thermal conductivity, insulation, strong stickiness, softness, compression, thermal double conductive tape is great helper to solve heat dissipation for many electronics products.
- ★Easy to use: Just stick on surface of any object and tear the blue release paper, which can be tightly and firmly conglutinate on the heat source devices and heat sink to speed the heat dissipation.
- ★Double-sided thermal adhesive tape at low cost solve the problem of both good heat dissipation and strong stickness, while improving the work efficiency. Which make the heat sink and IC chip bonding, make high power LED and heat aluminum bonding, replaced with a screw fixed, to achieve the most effective thermal dissipation.
★WELCOME TO THE ANGEL MALL★
★Features:
– Thermal conductivity and high stability, its life than the general heat double-sided stickers long，normal temperature (30~+150 °C ) can work for a minimum of 5 years.
★Specification:
➤Dimension: 25m x 20mm (Length x Width)
➤Glass fiber thickness: 0.25mm
➤Thermal Conductivity:1.5 W/m-k
➤Breakdown Voltage: 5KVAC
➤Thermal impedance : 0.3℃in2/w
➤Initial Adhesion: 1.5kg/inch
➤Applicable temperature range:-30~+150 °C
★Notes For Attention:
1.When using thermal conductive double-sided tape, keep the adhesive surface clean and dry.
2.After tearing off the heat-conductive double-sided tape to peel the paper, double-sided thermal tape is evenly pressed with your fingers (just a little strength).
3.The viscosity of the heat-conductive double-sided adhesive tape have initial viscosity and persistent viscosity, and at room temperature, it takes 72 hours to achieve the maximum adhesive strength.
4.In the paste process, the appropriate heating (60 ~ 70 ℃), will greatly contribute to the effective increase in the area of adhesive, and as soon as possible to achieve maximum adhesion.
★Package Contents
1 Roll Thermal Conductive Double-sided Tape
★ We are very confident that you will love our Products
(1) Strict Quality Control (100% Tested): In order to provide buyers with a pleasant shopping experience, each item has been carefully inspected and properly packed before sending out.
(2) Fast and Professional Service: We have professional after-sale service team, any questions or problems from buyers will be answered within 24 hours (Including holidays).
★We have professional R&D team, will continue to launch new products to meet customer needs and, thank you for your supporting!
Similar items with 4 stars and above
Zer one 8MM x 25M Double-Sided Thermal Adhesive Tape Conductive Cooling Tape for IC Chipset LED Lighting and LED TV
- Professional thermal adhesive tape-low cost solution for many applications, and improved working efficiency, it is widely used for IC chipset, LED lighting, LED TV etc
- Features-With electrical insulation, high thermal conductivity, easy peeling, uniform thickness, excellent heat dissipation, it is the best solution for heat dissipation of many electronic products.
- Easy to use-Blue lining removed, fast and steady adhesion to the ground, strong initial tack and long lasting fit
- Dimensions: Width 8 mm × length 25 m, thickness 0.2 mm
- Note-When using double-sided thermal adhesive tape, keep the adhesive side clean and dry
Features: Very durable and durable, with excellent shock absorption.High thermal conductivity ultra thin film with excellent thermal insulation.Adhesive force is strong and adhesive force is stable.It has excellent elasticity and is very easy to punch and insulate.
Low cost solution suitable for many applications such as LED IC lighting and LED TV.
Specification:
Condition: 100% new brand
Color: Blue (as shown)
Total length: about 25 meters / 82 feet
Size (W x T): 8 x 0.2 mm / 0.03 x 0.008 inch
Package weight: about 80g
packages included:
1 x thermal adhesive tape
Easycargo 10pcs 14mm Heatsink + pre Applied 3M 8810 Thermal Conductive Adhesive Tape for Cooling VRAM VGA RAM 3D Printer Stepper Motor Driver Module TMC2100 LV8729 DRV8825 (10pcs 14x14x13mm Black)
- Includes 10 pieces black anodized aluminum heatsink.
- Pre applied thermal conductive adhesive tape backing
- Dimension: 0.55 x 0.55 x 0.51 inch / 14 x 14 x 13mm (L*W*H).
- Can be applied for passive cooling cooling VRAM VGA RAM 3D Printer Stepper Motor Driver Module TMC2100 LV8729 DRV8825
- Wieght: 0.1 oz, 2.7 gr per piece.
10 pieces 14x14x13mm anodized black aluminum heatsink include pre applied heat conductive adhesive tape for optimum heat transfer. These heat sinks kit can be applied for cooling RAM VGA VRAM 3D Printer Stepper Motor Driver Module TMC2100 LV8729 DRV8825 etc. Material: aluminum Package includes:10 pcs anodized aluminum heat sinks: 0.55 x 0.55 x 0.28 inch / 14 x 14 x 13mm (L*W*H)
Similar items with 4 stars and above
icepc-DIY mSATA SSD Pure Copper Heatsink PCIe Cooler with High Performance Thermal Conductivity Adhesive for Cooling Mini-SATA Solid State Disk SSD Radiator(40x26x4mm)
- Universal Fit: for 50×30 size (50x30mm) mSATA SSD, such as PM830, PM851, SL700, etc.
- Pure copper：copper (401W/mk) has higher thermal conductivity than pure aluminum (237W/mk). High Performance thermal conductivity brings better heat dissipation effect, which makes the SSD run more smoothly.
- Broken groove design：Greatly increase the Heat Dissipation Area,heat exchanger can exude heat faster by heat exchange through contact with air, with 10°C- 25°C Cooling Effect(Varies depending on the environment).
- Tool free installation：The adhesive backing with high thermal conductivity helps you fix the radiator on SSD easily without any tools, stable and durable,will not cause any damage to SSD.Simple but practical solution for M.2 NVME SSD heat dissipation.
- Note：Please remove the blue protective films of Silica Gel Pad before using，otherwise it will reduce the heat conduction effect.
Features:
The mini-SATA solid state drive has higher performance and faster read and write speeds, but it’s also very hot when it’s running, so you need a high-performance copper radiator to protect your hard disk, icepc must be a good choice for you.
Pure copper (401W/mk) has higher thermal conductivity than pure aluminum (237W/mk).
High Performance thermal conductivity brings better heat dissipation effect, which makes the hard disk run more smoothly.
Heat exchanger can exude heat faster by heat exchange through contact with air.
Before purchase:
1. Please first measure the length and width of the chip of the M.2 solid state hard disk whether matches the 40mmx26mm almost. (Applicable to all kinds of MSATA SSD)
2. The space above the hard disk also needs to be measured enough. The thickness of the heat sink is 4mm thickness, and if the heat sink is attached to other parts.
3. It can also be used as a radiator for other equipment if the size is right.
Specifications:
Fit: mSATA solid state drive
Material: Pure copper (401W/mk)
Color: Shown as pictures
Size:40x26x4mm (Approx.)
Thickness: 4mm
Quantity: 1 pc
Note:
1.Transition: 1cm=10mm=0.39inch.
2.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before purchase.
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package included: (No retail package)
1 X Heatsink
Similar items with 4 stars and above
Lependor 15mm x 25m Thermal Conductive Tape Double-Sided Adhesive Cooling Tape for Heat Sink LED Strips, LED Tube, IC Chip-Set (0.59 in x 82 ft)
- Double-sided thermal adhesive tape at low cost solve the problem of both good heat dissipation and strong stickiness, while improving the work efficiency. Which make the heat sink and IC chip bonding, make high power LED and heat aluminum bonding, replaced with a screw fixed, to achieve the most effective thermal dissipation.
- With the features of high thermal conductivity, insulation, strong stickiness, softness, compression, thermal double conductive tape is great helper to solve heat dissipation for many electronics products , like for LED strip, CPU, GPU, Modules, SSD Drives.
- Easy to use – Just stick on surface of any object and tear the blue release paper, which can be tightly and firmly conglutinate on the heat source devices and heat sink to speed the heat dissipation.
- Thermal Conductivity:1.5 W/m-k. Long term heat resistant 120°C, short term heat resistant 180°C
- Size – Width15mm xLength 25m (0.59 in x 82 ft). Material – fiber glass + blue rubber, strong adhesive.
Specification:
Dimension: Width15mm xLength 25m (0.59 in x 82 ft)
Glass fiber thickness: 0.2mm
Thermal Conductivity:1.5 W/m-k
Breakdown Voltage: 4KVAC
Thermal impedance : 0.3℃in2/w
Initial Adhesion: 1.3kg/inch
180°Adhesion power: >16 N/25mm
Heat Resistance: 120°C (long time), 180°C ( short time)
Applicable temperature range:-20~+120 °C
Features:
Thermal conductivity and high stability, its life than the general heat double-sided stickers long,
normal temperature (80-120℃ ) can work for a minimum of 5 years.
Notes For Attention:
1.When using thermal conductive double-sided tape, keep the adhesive surface clean and dry.
2.After tearing off the heat-conductive double-sided tape to peel the paper, double-sided thermal tape is evenly pressed with your fingers (just a little strength).
3.The viscosity of the heat-conductive double-sided adhesive tape have initial viscosity and persistent viscosity, and at room temperature, it takes 72 hours to achieve the maximum adhesive strength. That is, at the beginning of the sticky adhesive that is the initial viscosity to 40% of its maximum viscosity, persistent stickiness is stable over time. 4.In the paste process, the appropriate heating (60 ~ 70 ℃), will greatly contribute to the effective increase in the area of adhesive, and as soon as possible to achieve maximum adhesion. In the lower temperature of the winter, it’s little tips that heating to increase the viscosity of the heat-conductive double-sided tape when using the thermal conductive tape.
Package included:
1 Roll Thermal Conductive Double-sided Tape.
Similar items with 4 stars and above
GENNEL 10gram Thermal Conductive Glue Silicone Plaster Viscous Adhesive Cooling Compound For LED GPU Chipset Heatsink
* 100% New Heatsink plaster.
* Application: apply to all heatsinkf no fixed clip thermal paste. Idea for MOSFET Heatsink，VGA CARD Northbridge Southbridge Heatsink.
* Features: thermal properties, strong adhesion
* Melting capacity: 0 (200 ℃ / 24Hours)
* Evaporation: 0.001% (200 ℃ / 24Hours)
* Thermal conductivity:> 1.2W/m-K
* Thermal Impedance: <0.06>
* Clotting time: 3min (25 ℃)
* Strength of connected buildings: 25Kg
* Insulation coefficient> 5.1
* Dissipation coefficient <0.005>
* Temperature resistance: 200 ℃
* Net Weight: 10g
Do not use thermal glue between CPU Chip and heatsink
Package Includes:
1 x Thermal Heatsink Plaster Glue.
DGZZI Heatsink 10PCS 14x14x7mm Aluminium Radiator Cooling Fin with 3M-8810 Thermal Adhesive for Raspberry Pi,VGA RAM,IC Chips,Mosfet SCR
- Made of high quality aluminum, fast heat conduction, good heat dissipation effect, long service life.
- Reduce the risk of hardware failure due to overheating.
- Designed to maximise its surface area in contact with the cooling air.
- Used for IC, Diode, Dynatron, Electronic, LED, RAM, CHIP computer’s component heat dissipation, or anywhere you need a efficient heatsink.
- Size : 14x14x7mm/0.55×0.55×0.28Inch.Color : Black.Package Include : 10PCS.
Product Description
Specification :
Product Name : Cooling Fin.
Material:Aluminum.
Size : 14x14x7mm/0.55×0.55×0.28Inch.
Color : Black.
Package Include : 10PCS.
Features:
Help keep your computer cool while overclocking. Fits the CPU/RAM, Network and Power chips. Made of high quantity aluminium, with good thermal conductivity. Reduce the risk of hardware failure due to overheating. Designed to maximise its surface area in contact with the cooling air.
With 3M backing, easy to install and use.
Conclusion
By our suggestions above, we hope that you can found thermal cooling adhesive for you.Please don’t forget to share your experience by comment in this post. Thank you!
