Best Under Tank Heating Pad Thermostat

“The iPower heat mat thermostat provides constant customized temp seed germination, reptiles and brewing. It is ideal for maintain rooting temperature in a tray and dome. Ideal in homebrewing for maintaining desired fermentation temperature, and perfect for temperature control in reptile terrariums and small pet enclosures. This heat mat controller is compatible with all heat mats, but is optimized for iPower seedling heat mats. Features: 1.Controls temperature in colder or warmer environments 2.Digital temperature controller for heat mat 3.Provides constant optimum temperature for specific crops 4.Digital thermostat provides temperature control between 40°F-108°F (5-42°C), temperature display range: 32 -140°F 5.Celsius or Fahrenheit read-out 6.Specs: 120 Volts / 8 Max Amps / 60 HZ / 1000 Watts 7.Easy plug-in operation with LED illuminated indicator lights & three-prong ground plug 8.CETL certification is proof that a product complies with widely-accepted safety standards 9.1 Year Manufacturer Warranty Seeding Heat Mat Setup Instructions： Place sensor into the rooting area about 1″”- 1-1/2″” Position thermostat up and away from seedling trays and stray water. Do not submerge Plug heat mat into thermostat Plug in thermostat power cord and set maximum desired temperature Heat mat thermostat can also be used to control the temperature of many other appliances as long as they don’t exceed the maximum electrical specifications stated above. Simply place the sensors in the area where the temperature needs to be controlled plug the appliance into thermostat, and set the desired temperature. NOTE: Please note that the controller can only be used to power off heating equipment at setting temperature and does not increase the heating power of the heating equipment. Abnormal Warning： If thermostat shows “”E1″”, it means that the actual temperature is lower than 0 degree Celsius or 32.0 degrees Fahrenheit If thermostat shows “”E2″”, it means that the actual temperature is higher than 60.0 degrees Celsius or 108.0 degrees Fahrenheit If thermostat shows “”E3″”, it means that the temperature sensor is not working properly. Please re-install the sensor”

Don’t bother fiddling around with your thermostat— let the Ohuhu Thermostat Temperature Controller do the hard work for you. This small and sleek remote keeps your garden, fish tank, and hatchery at a comfortable temperature (between 68°— 108°F) with just the touch of a button. The thermostat controller will turn off when your desired heat is reached and will turn on again if the temperature drops. Simply adjust and set your temperature for steady heat all day long. Operation is easy— just plug it in, set it down, or hang it up. Make your life easier with Ohuhu!

Installation:

Warmtact Heat Mats are supplied with plastic stick-on feet.

Remove the feet from the paper and attach them to the corners of the enclosure. The 14 and 20W models are supplied with 6 feet, the extra feet should be placed half way along each side of the enclosure.

Attach the mat under the enclosure in the desired location by taping the transparent edges in the desired location by taping the transparent edges of the mat to the underside of the enclosure and switch the mat on at the power outlet.

Monitor and conduct visual inspections of the heat mat daily for the first 3-5 days after installation to ensure heat mat is functioning properly.

Hints & Tips for Best Results

It is important that the heatmat does not cover more than 1/4 to 1/2 of the base area of the enclosure.

In general, the larger the enclosure, the smaller the coverage area should be.

The mat should not be placed directly beneath another heat source such as a heat lamp.

Warmtact heat mats are designed to operate 24/7 to provide a thermal option for the Warmtact.

All models include a built-in thermal cutoff which means the mat does not need to be run on a thermostat.

Ensure an adequate thermal gradient is provided in your environment design for the species being housed.

Specifications:

Material: PET

Category: Heating pad

Plug Type: US Plug

Voltage: 110V

Color: Black

Power: 20W

Size: 11×16.5 inch

Weight: 0.37 ib

Infrared Ceramic Reptile Heat Bulb: Specifications: Socket: E26Volt: AC 110-120VWatts: 150WMaterial: Ceramic, Diameter of heating surface: 85 mm Note: 1. Lamp surface temperature is too high, do not directly touch during it works. 2. Before remove it from fixture, please allow at least 1 hour for cool to avoid scald. 3. Accidents may happen due to improper operation so please use it in a right way and avoid using in damp environment. 4. Please adjust the distance between the lamp and the pets, at least 35cm. 5. Please away from combustible or explosive materials. ; Digital Thermostat Controller: Specifications: Temperature control range: 40-108°FTemperature display range: 32-140°FRated Voltage: AC 120V 60HzMax Loading: 8A 1000WEasy plug-in operation with LED illuminated indicator lights & three-prong ground plug The cord of the temperature probe and grounded three-prong plug is 6 feet ETL certification is proof that a product complies with widely-accepted safety standards Digital thermostat can also be used to control the temperature of many other appliances as long as they don’t exceed the maximum electrical specifications stated above. Simply place the sensors in the area where the temperature needs to be controlled plug the appliance into thermostat, and set the desired temperature. Abnormal Warning: 1. If thermostat shows “E1”, it means that the actual temperature is lower than 0 degree Celsius or 32. 0 degrees Fahrenheit. 2. If thermostat shows “E2”, it means that the actual temperature is higher than 60. 0 degrees Celsius or 108. 0 degrees Fahrenheit. 3. If thermostat shows “E3”, it means that the temperature sensor is not working properly. Please re-install the sensor. Clamp Light: : 120VWatt: Accepts up to 150W bulb (E26)Reflector Diameter: 8. 5 inch Cord: 6 Feet 18/2 SPT-2 Cord UL Listed Clamp light can also be used as a table lamp in your room, garages or art studios, a work light in photography and workshops, amphibians and reptiles pets terrarium heat lamp, and even a growth light for indoor plants. Warning: The power cord on this product contains chemicals, including lead known to the State of California to cause cancer. Wash hands after use.

Give your pet the extra heat it needs. PeSandy heat mat’s durable construction provides uniform, evenly distributed heat. Easy to use and safe for all reptiles and amphibians. For use outside your pet’s enclosure. It can be mounted under or on side of your pet’s enclosure.

Feature
– Regulating power switch;
– Low power consumption;
– Enclosed circuit, leak-proof;
– Uniform heat dissipation, waterproof;
– Safe to use, won’t hurt your lovely pet;
– Pad can be used under a tank or vivarium;
– Suitable for tortoise, snakes, lizard, gecko, Hermit Crab, turtle, spider, insect breeding, and other amphibians that requires belly heat;

Specification
– Material: PET;
– Weight: 7W – 100g/ 3.52oz, 14W – 135g/ 4.76oz, 20W – 165g/ 5.82oz;
– Color: Black;
– Plug Style: US Plug;
– Voltage Range: 100v- 120v;
– Regulating Range: 0-35 Degree;
-Size:
7W – 28 x 15cm/ 11 x 6 inches;
14W – 28 x 28cm/ 11 x 11 inches;
20W – 42 x 28cm/ 16.5 x 11 inches;

Kindly Reminder
1. Highly recommend using the PeSandy terrarium heating pad with a thermostat. Or use a temp gun and check the temps to ensure correct temps.
2. The reptile heater mat is slightly waterproof, do not immerse it in water or long-term in high-temperature environment, so as not to cause electrical short-circuit and burn hazards.

Package include
1 x Adjustable Reptile Heating Pad(US Plug).

Conclusion

By our suggestions above, we hope that you can found under tank heating pad thermostat for you.Please don’t forget to share your experience by comment in this post. Thank you!